Solar Tracking Systems ETATRACK active
Solar Tracking Systems ETATRACK active
BERNT LORENTZ GmbH & Co. KG specializes in solar-powered water pumping systems. The company offers a wide range of over 70 pump systems, each consisting of a controller, motor, and pump end. The document provides an overview of their ETATRACK active tracking systems for photovoltaic (PV) modules.
The ETATRACK active systems are designed to increase the yield of PV modules by up to 40% by following the sun throughout the day. This maximizes the time during which useful power levels are delivered and optimizes peak power output. LORENTZ has been manufacturing these systems since 1998, with numerous installations worldwide.
- Cost-effective single-axis design enhances reliability and efficiency.
- Simple design ensures quick and failure-free installation.
- High reliability and excellent serviceability reduce the cost of ownership.
- Long life expectancy aligns with PV modules for predictable financial planning.
- Short Return on Investment (ROI) cycle.
- Competitive business case compared to fixed and dual-axis PV installations.
- Single-axis, 90° tracking angle East-West.
- Robust hot Zinc-coated steel frame suitable for ground installation on concrete foundations.
- Stainless steel module fixings.
- Maintenance-free DC linear drive.
- Sensorless control with low energy consumption.
- Options to synchronize multiple units.
- Designed to withstand high wind speeds according to German and European standards.
The document lists various models of ETATRACK active systems with specifications such as PV module surface area, maximum power installed, and adjustability of the second axis. For example, the ETATRACK active 600 has a PV module surface of 6.0 m² and a maximum power of approximately 1.0 kWp, with a manually adjustable second axis from 0 to 50°.
Catalog excerpts
ETATRACK active Single-axis Tracking Systems for PV Modules Benefits LORENTZ ETATRACK active tracking systems provide up to a 40 % higher yield from your PV modules. ETATRACK systems follow the sun through the day, this extends the time that useful power levels are delivered and maximises the peak power. LORENTZ have been designing, manufacturing and selling tracking systems since 1998 with thousands of systems installed across the world. tracking system PV module surface max. power installed second axis tracking system PV module surface max. power installed second axis Single axis design for cost effectiveness, reliability and efficiency Simple design for fast, failure-free installation High reliability and excellent serviceability lowers cost of ownership Long life expectancy in line with PV modules for predictable financial planning Short Return of Investment (ROI) cycle Very attractive business case against fixed and dual axis PV installations Single axis, 90° tracking angle East-West Robust hot Zinc-coated steel frame For ground installation on concrete foundation Stainless steel module fixings Maintenance-free DC linear drive Sensorless control Self-powered with very low energy consumption Control options to synchronise multiple units Designed for high wind speeds according to German and European standards fixed, 30°, other angles on request manually adjustable, stepwise 0 – 45° manually adjustable, stepwise 0 – 45° manually adjustable, stepwise 0 – 50° fixed, 30°, other angles on request To nd out more visit www.lorentz.de v120601 BERNT LORENTZ GmbH & Co. KG Kroegerskoppel 7, 24558 Henstedt-Ulzburg, Germany, Tel. +49 (0) 4193 7548 - 0 All specications and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may differ from actual products depending on local market requirements and regulations. A pump system consists of a controller, motor and pump end. Multiple pumps/pump ends are shown to represent the wide range of pumps (over 70) that LORENTZ has.
Open the catalog to page 1All Lorentz catalogs and technical brochures
PSk2-CS1 Page
PV Modules LC Series1 Page
PSk21 Page
PS-c1 Page
PS-hr1 Page
