Systems for outdoors
51Pages

SYSTEMS FOR GLASS BALUSTRADES

SYSTEMS FOR GLASS BALUSTRADES SYSTEMS FOR OUTDOORS CANOPIES CANOPY LIGHT Page 138 GLASS CANOPY Page 144 FLUIDO CLAMP FAÇADE SYSTEM Page 152 ROTULE JOINTS Page 172

SYSTEMS FOR GLASS BALUSTRADES SYSTEMS FOR OUTDOORS OXY STYLE - Licence no.758 GEAL - Licence no.740 LA PENSILINA - CLASS 20 Minimum anodising thickness 20 micron Indicated for outdoor installations 128

SYSTEMS FOR GLASS BALUSTRADES LA PENSILINA KIT FOR CANTILEVERED CANOPY, NO RODS AND NO GLASS CUT OUT REQUIRED The kit consists of a load-bearing aluminium profile, gaskets and safety accessories and includes finishing end caps without visible screws. Features: Load-bearing extruded aluminium 6063-T6 for glass composition 88.2 (16.76 mm) or 88.4 (17.52 mm). Grey TPE glazing bead and wall sealing gaskets. Grivory® locking cams and safety elements for maximum mechanical properties and ageing resistance. Aluminium end caps, to be applied with silicone. Finish: matt aluminium, brushed stainless...

SYSTEMS FOR GLASS BALUSTRADES LA PENSILINA ALUMINIUM PROFILE Material: 6063-T6 aluminium Features: load-bearing extruded aluminium 6063-T6 for glass composition 88.2 (16.76 mm) or 88.4 (17.52 mm). Grey TPE glazing bead and wall sealing gaskets. Finish: matt aluminium, brushed stainless steel effect aluminium, RAL 9010 (glossy white), raw-finish aluminium. Other anodised and RAL finishes are available on demand Dimensions H80 x P100 mm for 88.2 or 88.4 glass H80 x P100 mm for 88.2 or 88.4 glass H80 x P100 mm for 88.2 or 88.4 glass H80 x P100 mm for 88.2 or 88.4 glass LOCKING CAMS Material:...

SYSTEMS FOR GLASS BALUSTRADES LA PENSILINA CAP KIT WITH SCREWS Art. Description PENT03 Two end caps with fastening screws Material: aluminium Features: pair of open aluminium end caps Finish: matt aluminium, brushed-steel-effect aluminium, RAL 9010 (glossy white), raw aluminium Other anodised and RAL finishes are available on demand Art. Description PENT05 Pair of open end caps KEY FOR LOCKING CAM LA PENSILINA Material: alloy steel Features: bent size 8 hexagonal key for La Pensilina cam locking. CUSTOM CUTTING FOR LA PENSILINA KIT Art. Description PENTAGLIO Custom cutting for La Pensilina...

SYSTEMS FOR GLASS BALUSTRADES LA PENSILINA - TECHNICAL FOREWORD La Pensilina is a cantilevered canopy system requiring no rods and no glass cut out. The pane is held by a continuous aluminium profile, designed to withstand operating loads covering all possible load combinations (snow), in addition to the lifting action caused by wind. The profile can be anchored to the wall by means of mechanical or chemical anchors, depending on the type of support. Logli Massimo S.p.A. performed system resistance tests at ISTITUTO GIORDANO laboratories. The test was carried out by applying increasing...

The performances after complete breaking of both glass panes have been assessed experimentally by Logli Massimo S.p.A. on laminated glass with tempered glass and SentryGlas ® interlayer for a cantilever up to 1.20m ! In compliance with the criteria described in EAD 220025-00-0401, the tests show that the La Pensilina profile is able to hold the fully damaged pane inside it for more than 24 hours, regardless of the gradual flexion increase over time. Furthermore, it has been observed that the rate of deflection upon breakage of the glass is such as to allow for safe evacuation of the persons...

SYSTEMS FOR GLASS BALUSTRADES CHART OF THE EXTRACTION FORCES ACTING ON THE ANCHORS [KN] cantilever [cm] DESIGNER TABLE Key: - Extraction force acting on the anchors in kN: the chart contains the values of the extraction force acting on the individual anchor in relation to the canopy cantilever and to the snow load, assuming there are 5 fastenings per metre. - Snow load in kg/m 2: the snow load is defined in the technical codes in relation to the geographical area, altitude and exposure. The colours identify the fields of application with different types of anchor depending on the type of...

SYSTEMS FOR GLASS BALUSTRADES

SYSTEMS FOR GLASS BALUSTRADES LA PENSILINA - INSTALLATION INSTRUCTIONS

SYSTEMS FOR GLASS BALUSTRADES LA PENSILINA - INSTALLATION INSTRUCTIONS RIGHT LEFT

SYSTEMS FOR GLASS BALUSTRADES CANOPY LIGHT

SYSTEMS FOR GLASS BALUSTRADES SYSTEM FOR GLASS CANOPIES - CANOPY LIGHT CANOPY LIGHT - WALL JOINT - AISI 316L Material: machined AISI 316L steel Features: wall joint with Ø10 mm junction pin. Finish: machined steel (CNC) F max = 400 daN (1 daN corresponds approximately to a weight of 1 kg) Check resistance features of the anchoring wall. F 36 REGISTERED MODEL Recommended tightening tool: Art. UT250 / Art. CHSETT19 Art. Dimensions GCL21 Stud Ø45 mm - Bar M16 x 135 mm - Angle 0 / 45° CANOPY LIGHT - ARTICULATED STUD - AISI 316L Material: machined AISI 316L steel Features: glass stud with...

CANOPY LIGHT - TIE ROD - AISI 316L Material: machined AISI 316L steel Features: tie rod Ø10 mm with threaded ends, M10 right and M10 left, respectively. Finish: brushed steel N.B. To calculate C, see the diagram on the next page. Art. Dimensions GCL23 Ø10 mm x maximum length 1500 mm CANOPY LIGHT - WALL-MOUNTED CONNECTOR - AISI 316L Material: machined AISI 316L steel Features: wall-mounted connector with Ø10 mm junction pin. Finish: machined steel (CNC) F max = 400 daN (1 daN corresponds approximately to a weight of 1 kg) Check resistance features of the anchoring wall. SYSTEMS FOR GLASS...

SYSTEMS FOR GLASS BALUSTRADES SYSTEM FOR GLASS CANOPIES - CANOPY LIGHT DIAGRAM WITH RECOMMENDED GLASS PANES WALL SIDE WALL SIDE N.B.: standard UNI 7697 applies at the time of publication of this catalogue, requiring the use of laminated safety glass (in accordance with UNI EN ISO 12543-1), as well as the implementation of measures to limit the risk of immediate collapse after breakage, such as the use of a rigid interlayer, i.e. from range 3 as defined in prEN 16613 NORMAL HOLE (45° angle between glass pane and tie rod) The following table sets out the approximate measurements and...