Systems for glass balustrades
101Pages

SYSTEMS FOR GLASS BALUSTRADES

DEFENDERCUT-OUT BALUSTRADES WITHOUT GLASS SERIES 450 RECESSED AND FLOOR INSTALLATION SERIES DFS01 SLAB INSTALLATION Allgemeines bauaufsichtliches Prüfzeugnis P-2016-3066 TECHNICAL GUIDE AVAILABLE ON:

SYSTEMS FOR GLASS BALUSTRADES SYSTEMS FOR GLASS BALUSTRADES FITTINGS FOR BALUSTRADES WITH SLAB ANCHORING Page 60 EVODR STUDDED Ø50mm POINT FITTING Page 62 DGM45B - STUDDED POINT FITTING Ø45 mm ALUMINIUM Page 66 DGM45C - POINT FITTING Ø45 mm WITH ALUMINIUM COVER Page 69 POINT FIXINGS WITH SPACER Page 73 POINT FIXINGS WITH DISTB SPACER Page 80 ATT SERIES UPRIGHTS AND FIXINGS Page 90 UPRIGHTS FOR CLAMPS Page 95 CARRÉ SERIES CLAMPS Page 96 BALLON SERIES CLAMPS Page 99 ROUND AND SQUARE STRUCTURAL HANDRAIL Page 102 STEEL FINISHING PROFILES Page 114 ALUMINIUM FINISHING PROFILES Page 115 POOL GLASS...

SYSTEMS FORGLASS BALUSTRADES Suitable for: Private homes Public housing (Public places) STADIUMS PATENTED SYSTEM

SYSTEMS FORGLASS BALUSTRADES with glass ✔ Patented system for glass holding and alignment adjustment, WITHOUT WEDGES ✔ Extremely resistant ✔ Compact size (h=119.5 mm; b=72 mm) ✔ Supplied pre-drilled ✔ WITHOUT COVER ✔ ANODISED 20 MICRON ✔ Supplied with adhesive protective film ✔ SIMPLE AND QUICK INSTALLATION with glass ✔ Patented system for glass holding and alignment adjustment, WITHOUT WEDGES ✔ Extremely resistant ✔ Compact size (h=182 mm; b=74.5 mm) ✔ Supplied pre-drilled ✔ ANODISED 20 MICRON ✔ Supplied with adhesive protective film ✔ SIMPLE AND QUICK INSTALLATION For Kuraray’s Licensees’...

SYSTEMS FOR GLASS BALUSTRADES DEFENDER - FEATURES Patented system for glass holding and alignment adjustment.

SYSTEMS FOR GLASS BALUSTRADES DEFENDER - FEATURES Compact size Extremely resistant with glass WITHOUT GLASS BREAKAGE with glass WITHOUT GLASS BREAKAGE Simple and quick installation Anchoring centre distance 200 mm Easy adjustment for glass plumbing Clamp centre distance 250 mm 2 Adjustable pressing devices for each clamp Snap finishing claddi

SYSTEMS FOR GLASS BALUSTRADES DEFENDER - INTERNATIONAL TECHNICAL APPROVALS INTERNATIONAL TECHNICAL APPROVALS The balustrades are anti-fall protections subject to regulations and Standards that each member state of the European Community defines independently. To date the Eurocodes published in the final version are 10 (from zero to nine) but none of them deals with the glass material specifying the calculation procedures for applications such as balustrades. Regulatory references: Italy · NTC 2018 - Technical Building Regulations, they contain the definition of the working loads for...

SYSTEMS FOR GLASS BALUSTRADES DEFENDER - INTERNATIONAL TECHNICAL APPROVALS Chart of classes of use by glass type: ITALY (NTC 2018 + UNI 11678 + UNI 7697) Glass thickness System Trosifol® Extra Stiff Glass type Environments subject to crowding Key to load categories according to NTC 2018: Trosifol® Extra Stiff Glass type key: T – I = tempered + hardened T – T = tempered + tempered * UNI 7697 allows Tempered/Hardened glass to be used in the absence of rigid interlayer. Tempered glass is intended as placed on the side of the thrust. h balustrade = 1100 mm from the walk-over surface Note:...

SYSTEMS FOR GLASS BALUSTRADES DEFENDER - INTERNATIONAL TECHNICAL APPROVALS Chart of classes of use by glass type: FRANCE (NF P 06-001 + Cahier CSTB n.3034 + EN 14179) Glass thickness System Glass type Trosifol® Extra Stiff Trosifol® Extra Stiff Key to load categories according to NF P 06-001: Private Glass type key: TH – TH = tempered HST + tempered HST Note: for laminated elements with thickness 8+8 with PVB and EVA, we recommend widths of the balustrade above 1m. For laminated elements with thickness 8+8 with EVA SAFE/SECURE, we recommend widths of the balustrade above 75 cm. -> The tests...

SYSTEMS FOR GLASS BALUSTRADES DEFENDER - INTERNATIONAL TECHNICAL APPROVALS Chart of classes of use by glass type: GERMANY (DIN 18008-4) Glass thickness System Glass type Trosifol Extra Stiff Trosifol® Extra Stiff Key to load categories according to DIN 18008: Public Glass type key: T – T = tempered + tempered Note: The procedure to obtain the AbP requires use of the handrail. The system has been fitted with CORLM structural handrail by Logli Massimo. The validation of laminated glass with interlayer with lower performances suggests system compliance with all the others having equal or...

SYSTEMS FOR GLASS BALUSTRADES DEFENDER - INTERNATIONAL TECHNICAL APPROVALS Chart of classes of use by glass type: ENGLAND (BS 6180) Glass thickness Glass type Trosifol® Extra Stiff Public Crowded -> The tests require a maximum deformation on the upper edge of 25 mm with working load. Trosifol Extra Stiff Residential / balconies Key to load categories according to BS 6180 Class Glass type key: TH = tempered HST TH + TH = tempered HST + tempered HST h balustrade = 1100 mm from the walk-over surface Chart of classes of use by glass type: BELGIUM (NBN B 03-004) Glass thickness System Glass type...

SYSTEMS FOR GLASS BALUSTRADES

SYSTEMS FOR GLASS BALUSTRADES SPECIAL CUTS ON REQUEST

OXY STYLE - Licence no.758 GEAL - Licence no.740 DEFENDER – CLASS 20 – Minimum anodising thickness 20 micron Suitable for outdoor installations, even in aggressive environments ALL THE PROFILES ARE PROTECTED BY FILM TO PREVENT SCRATCHES DURING INSTALLATION SYSTEMS FOR GLASS BALUSTRADES

DEFENDER 450 FLOOR INSTALLATION KIT Material: extruded aluminium (6063 T6) Finishes: brushed stainless steel-effect aluminium, matt aluminium, RAL 9010 (glossy white), RAL 9005 (black matt), raw finish The brushed stainless steel-effect aluminium finish is available only for profiles up to 3000 mm long. On request (not available in stock): RAL finishes other colours Dimensions For glass panes 119.5 x 72 x L 6000 mm A = 17.52 mm 119.5 x 72 x L 3000 mm A = 17.52 mm 119.5 x 72 x L 1498 mm A = 17.52 mm 119.5 x 72 x L 6000 mm A = 21.52 mm 119.5 x 72 x L 3000 mm A = 21.52 mm 119.5 x 72 x L 1498...