SINGLE-POINT FIXINGS FOR BALUSTRADES

SINGLE-POINT FIXINGS FOR BALUSTRADES WITH ADJUSTABLE SPACER EVODR • Balustrade point fixing with Ø50 mm stud for 17.5 / 21.5 mm glass thickness • Wall anchoring by means of M12 threaded bar • Adjustable wall/glass distance: up to 10 mm • Adjustable wall positioning: +/- 4 mm every direction • Tightening through hook wrench with Ø4 mm radial hole • EPDM gaskets • Material: stainless steel AISI304 / AISI316 EVODR STUDDED POINT FIXING Ø50mm WITH ADJUSTABLE SUPPORTING SPACER AISI304 / AISI316 STAINLESS STEEL Material: stainless steel AISI304 / AISI316 Features: point fixing with Ø50 mm stud and Ø50...

EVODR - INTERNATIONAL TECHNICAL APPROVALS The glass balustrades can be made up of layered panels supported by point fixings, arranged in various configurations. The type of installation requires for the glass to be drilled, therefore the use of tempered glass is a basic condition to ensure an adequate level of safety. UNI 7697:2015 in point 9.4 requires the use of glass with HST treatment compliant with UNI EN 14179. The balustrades made with point fittings are subject to the same regulatory requirements as those with strap support. The tests conducted by Logli Massimo refer to two possible configurations,...

EVODR - INTERNATIONAL TECHNICAL APPROVALS Chart of class of use for glass type: ITALY (NTC 2018 + UNI 11678 + UNI 7697) Glass thickness System Glass type Trosifol® Extra Stiff Trosifol Extra Stiff Glass type key: T – T = tempered + tempered * UNI 7697 allows use of Tempered/Hardened glass in case of lack of rigid interlayer Load categories key according to NTC 2018: Environments susceptible to crowding h glass = 1100 mm from the walk-over flooring Note: the category 1 kN/m is still required in the new NTCs only for areas in residential environments and offices not open to the public that are...

EVODR - INTERNATIONAL TECHNICAL APPROVALS Chart of class of use for glass type: FRANCE (NF P 06-001 + Cahier CSTB n.3034 + EN 14179) Glass thickness System EVODR 4 Points 1200 x 1390 Glass type Trosifol® Extra Stiff Trosifol Extra Stiff Glass type key: TH-TH = tempered HST + tempered HST Load categories key according to NF P 06-001: Private -> The tests require a maximum deformation on the upper bank of 35 mm with working load. h glass = 1100 mm from the walk-over flooring Glass type key: T – T = tempered + tempered Chart of class of use for glass type: - GERMANY (DIN 18008-3) - ENGLAND (BS 6180)...

SINGLE-POINT FIXINGS FOR BALUSTRADES WITH ADJUSTABLE SPACER STUDDED POINT FIXINGS Ø45 mm ALUMINIUM Material: aluminium 6063 Features: point fixing with Ø45 stud. The stud is fixed with a countersunk head screw M10 x 35 mm in AISI 316. Wall fixing accessories (threaded bar, anchor, screw) not supplied Finishes: brushed stainless steel-effect aluminium, matt aluminium, raw finish. On demand (not available in stock): RAL finishes other colours +/- 4 Wall position adjustment ±4 mm in all directions Wall distance adjustment Recommended glass hole Ø32 mm OXY STYLE - Licence no.758 GEAL - Licence no.740...

SINGLE-POINT FIXINGS FOR BALUSTRADES WITH ADJUSTABLE SPACER

SINGLE-POINT FIXINGS FOR BALUSTRADES WITH ADJUSTABLE SPACER

SINGLE-POINT FIXINGS FOR BALUSTRADES WITH ADJUSTABLE SPACER POINT FIXINGS Ø45 mm WITH ALUMINIUM COVER Material: aluminium 6063 Features: point fixing with Ø45 stud. The stud is fixed with a countersunk head screw M10 x 35 mm in AISI 316 hidden by a screwed cover. Wall fixing accessories (threaded bar, anchor, screw) not supplied Finishes: brushed stainless steel-effect aluminium, matt aluminium, RAL 9010 (polished white), RAL 9005 (matt black), raw finish On demand (not available in stock): RAL finishes other colours +/- 4 Wall position adjustment ±4 mm in all directions Wall distance adjustment...

DGM45 - INTERNATIONAL TECHNICAL APPROVALS Load diagram for static tests on mod. DGM45 (6 points i=500 mm) Load diagram for static tests on mod. DGM45 (4 points i=600 mm) WALK-OVER FLOORING Chart of class of use for glass type: ITALY (NTC 2018 + UNI 11678 + UNI 7697) Glass thickness System Glass type Trosifol® Extra Stiff Trosifol Extra Stiff h glass = 1100 mm from the walk-over flooring Glass type key: T – T = tempered + tempered * UNI 7697 allows use of Tempered/Hardened glass in case of lack of rigid interlayer Load categories key according to NTC 2018: Residential and Offices 2.0 kN/m Note:...

DGM45 - INTERNATIONAL TECHNICAL APPROVALS Chart of class of use for glass type: FRANCE (NF P 06-001 + Cahier CSTB n.3034 + EN 14179) Glass thickness System DGM45 4 Points 1200 x 1390 Glass type Trosifol® Extra Stiff Trosifol Extra Stiff Glass type key: TH-TH = tempered HST + tempered HST Load categories key according to NF P 06-001: Private -> The tests require a maximum deformation on the upper bank of 35 mm with working load. h glass = 1100 mm from the walk-over flooring Glass type key: T – T = tempered + tempered Chart of class of use for glass type: - GERMANY (DIN 18008-3) - ENGLAND (BS 6180)...

The images and information contained in this catalogue are to be considered indicative and may be subject to variations without prior notice. LOGLI MASSIMO SpA Via Chemnitz, 49/51 59100 Prato - Italia Tel. +39.0574.701035 Fax +39.0574.527574 www.loglimassimo.it [email protected] [email protected] Executive Partner / Corporate Partner Fornitore Ufficiale ASSOCIATED PARTNERS