Pull handles and knobs
59Pages

PULL HANDLES AND KNOBS

SYSTEMS FOR HINGED DOORS ALUMINIUM SYSTEMS FOR SLIDING DOORS STEEL SYSTEMS FOR SLIDING DOORS GLASS HOLDER AND POINT FIXINGS SYSTEMS FOR GLASS PARTITIONS PANIC EXIT DEVICES Page 644 STEEL AND ZAMAK HANDLES WITH KNOB Page 661 ALUMINIUM HANDLES WITH VHB FIXING Page 667 STEEL HANDLES FOR SLIDING DOORS Page 679 STEEL KNOBS Page 687 SYSTEMS FOR GLASS BALUSTRADES

SYSTEMS FOR GLASS BALUSTRADES PULL HANDLES AND KNOBS SYSTEMS FOR OUTDOORS SYSTEMS FOR GLASS PARTITIONS ROUND PULL HANDLES SQUARE - FLAT Page 653 STEEL IN-LINE ROUND PULL HANDLE Page 657 PAIR OF STEEL ROUND PULL HANDLES Page 658 ZAMAK PULL HANDLES Page 663 ZAMAK HANDLES Page 664 ALUMINIUM, BRASS PULL HANDLES Page 665 ALUMINIUM PULL HANDLES Page 666 HANDLES FOR ROLLAWAY SLIDING DOORS Page 674 HANDLES FORALUMINIUM SLIDING DOORS Page 676 HANDLES FOR SLIDING DOORS ALUMINIUM WITH VHB FIXING Page 677 HANDLES FORALUMINIUM SLIDING DOORS Page 678 HANDLES FOR SLIDING DOORS STEEL WITH VHB FIXING Page...

SYSTEMS FOR GLASS BALUSTRADES PANIC EXIT DEVICE For panic exits it is mandatory to exclusively install systems that comply with standard EN 1125, dedicated to panic exit systems with devices actuated from horizontal bars (traditional and touch-bar panic exit devices). Devices mainly installed in public facilities with staff that is not trained in emergency procedures: cinema, theatres, sports facilities, etc. From the Warrington Certification Limited (WCL) institute, Iseo Serrature has obtained the conformity certificate for standard EN 1125 according to CPR 305/2011. IN THE PHOTO: 1 x MAPA...

SYSTEMS FOR GLASS BALUSTRADES PANIC EXIT DEVICES 6 Suitable for fire/smoke doors Cyclical duration Door weight Fire resistance Corrosion resistance an accident or misuse may occur. grade 3 = high strength, Cyclical duration. There are two categories: grade 4 = very high strength. Safety for property. There is a single category that represents the minimum obtainable grade based on the fact that the safety of the property is secondary Door weight. There are two categories: Bar protrusion. There are two categories: grade 1 = protrusion of the bar up to 150 mm (normal) Fire resistance. There...

SYSTEMS FOR GLASS BALUSTRADES SYSTEMS FOR OUTDOORS PANIC EXIT DEVICE Material: PVD finish = internal mechanism made with AISI 304 stainless steel and aluminium cladding with PVD treatment grey finish = internal mechanism made with galvanised steel and painted aluminium cladding Features: panic exit device characterised by material and technical solutions fulfilling the strictest requirements of the standards, including CE marking according to CPR 305/2011; and voluntary product certification issued by third party ICIM as required by standard UNI EN 1125. Version equipped with side latch...

SYSTEMS FOR GLASS BALUSTRADES PANIC EXIT DEVICES HANDLE Material: PVD finish = internal mechanism made with galvanised steel and aluminium cladding with PVD treatment grey finish = internal mechanism made with galvanised steel and painted aluminium cladding Features: handle fitted with plate with interchangeable European cylinder, comes with 3 keys. Finish: Brushed steel PVD, painted grey. Specify which direction the door opens: see diagram Page 646 SYSTEMS FOR GLASS PARTITIONS WALL MOUNTED ELECTRIC STRIKING PLATE Safety and easy installation. The pins are separate, self-locking, blast...

SYSTEMS FOR GLASS BALUSTRADES PANIC EXIT DEVICES GLASS KIT FOR ADDITIONAL “BOLT” LOCKS Material: zamak Features: additional BOLT locks installation kit (Art. MAP113 / MAP114) Finish: Brushed steel PVD Detail ref.: A - C - F - I - L - P - Q - S SYSTEMS FOR GLASS PARTITIONS GLASS KIT FOR SIDE PIN RECEIVER GLASS HOLDER AND POINT FIXINGS Material: zamak Features: kit for panic exit device side lock striking plate (Art. MAP101 and MAP101-BOLT) Finish: Brushed steel PVD Detail ref.: B - G - M - R STEEL SYSTEMS FOR SLIDING DOORS GLASS KIT FOR ADJUSTABLE TOP “BOLT” PIN RECEIVER ALUMINIUM SYSTEMS...

SYSTEMS FOR GLASS BALUSTRADES PANIC EXIT DEVICES ALUMINIUM SYSTEMS FOR SLIDING DOORS BOLT SIDE PULL HANDLES AND KNOBS SYSTEMS FOR HINGED DOORS SINGLE DOOR STEEL SYSTEMS FOR SLIDING DOORS GLASS HOLDER AND POINT FIXINGS HANDLE SIDE BOLT SIDE SYSTEMS FOR GLASS PARTITIONS DOUBLE DOOR

SYSTEMS FOR GLASS BALUSTRADES PANIC EXIT DEVICES SECTION OF LINTEL WITH STRIKE X 6 LINTEL SECTION BOLT SIDE PULL HANDLES AND KNOBS SINGLE DOOR SYSTEMS FOR HINGED DOORS ALUMINIUM SYSTEMS FOR SLIDING DOORS STEEL SYSTEMS FOR SLIDING DOORS HANDLE SIDE SYSTEMS FOR GLASS PARTITIONS BOLT SIDE SECTION OF LINTEL WITH STRIKE LINTEL SECTION GLASS HOLDER AND POINT FIXINGS

SYSTEMS FOR GLASS BALUSTRADES PULL HANDLES SYSTEMS FOR GLASS PARTITIONS GLASS HOLDER AND POINT FIXINGS STEEL SYSTEMS FOR SLIDING DOORS ALUMINIUM SYSTEMS FOR SLIDING DOORS SYSTEMS FOR HINGED DOORS PULL HANDLES AND KNOBS

SYSTEMS FOR GLASS BALUSTRADES ROUND PULL HANDLE WITH LOCK FOR GLASS DOORS PAIR OF PULL HANDLES WITH VACANT/ENGAGED LOCK WITH Ø25 ROUND SECTION IN AISI 304 STEEL SYSTEMS FOR GLASS PARTITIONS Material: AISI 304 stainless steel Features: pull handle with lock located on the top end of the handle rod which locks by pressing the cylinder with the key in. The standard version comes with lock on the outside, otherwise this needs to be specified in the order. Suitable for glass with variable thickness between 8 and 21.52 mm, the special fitting is built so as to avoid dismantling from the outside....

SYSTEMS FOR GLASS BALUSTRADES ROUND PULL HANDLES FOR GLASS DOORS PAIR OF PULL HANDLES ROUND SECTION Ø25 mm AISI 304 STEEL Material: AISI 304 stainless steel Features: pull handles for glass doors with Ø25 mm round diameter suitable for variable glass thickness from 8 to 21.52 mm. Special fitting made for easier mounting and avoid disassembly from the outside. In the 1400 and 2000 mm long versions, there are 3 glass fixing fittings. Finish: brushed steel On request: polished and length to measure SYSTEMS FOR GLASS PARTITIONS GLASS HOLDER AND POINT FIXINGS Dimensions Section Ø25 mm x length...