LA PENSILINA
12Pages

{{requestButtons}}

Catalog excerpts

LA PENSILINA - 1

Quality, resistance and durability Evaluated at European level

Open the catalog to page 1
LA PENSILINA - 2

The very first product on the market with no glass cut out required to get the A perfect balance between elements “La Pensilina”, with balanced proportions and novel forms, uses a minimalist approach, providing a clean and luminous look. OXY STYLE - Licence no.758 GEAL - Licence no.740 COROXAL - Licence no.753 LA PENSILINA - CLASS 20 Minimum anodising thickness 20 micron Indicated for outdoor installation

Open the catalog to page 2
LA PENSILINA - 3

LA PENSILINA KIT FOR CANTILEVERED ROOF NO RODS AND NO GLASS CUT OUT REQUIRED The kit is made up of a load-bearing profile in aluminum, pre-drilled with 200 mm center distance, gaskets, safety accessories and includes finishing end-caps without visible screws. Features: Load-bearing extruded aluminium 6063-T6 for glass composition 88.2 (16.76 mm) or 88.4 (17.52 mm). TPE glass holder and wall gaskets, grey coloured. Grivory® locking cams and safety elements for maximum mechanical and ageing resistance. End caps in aluminium, to be applied with silicone. Finish: matt aluminium,...

Open the catalog to page 3
LA PENSILINA - 4

LA PENSILINA ALUMINIUM PROFILE Material: aluminum 6063-T6 Features: load-bearing extruded aluminum 6063-T6 for glass composition 88.2 (16.76 mm) or 88.4 (17.52 mm). Pre-drilled with 200 mm center distance TPE glass holder and wall gaskets, grey coloured. Finish: matt aluminum, brushed-steel-effect aluminum, RAL 9010 polished white aluminum, raw aluminum. Other anodised and RAL finishes are available on demand Dimensions H80 x P100 mm for glass 88.2 or 88.4 H80 x P100 mm for glass 88.2 or 88.4 H80 x P100 mm for glass 88.2 or 88.4 H80 x P100 mm for glass 88.2 or 88.4 LOCKING CAMS Material:...

Open the catalog to page 4
LA PENSILINA - 5

LA PENSILINA CAP KIT WITH SCREWS Material: aluminium caps, class A4 fastening screws Features: pair of end caps with screw fastening for profile La Pensilina, the kit includes the fastening screws Finish: matt aluminium, brushed-steel-effect aluminium, RAL 9010 polished white aluminium, raw aluminium Other anodised and RAL finishes are available on demand 80 Art. Description PENT03 Two end caps with fastening screws Material: aluminium Features: pair of open aluminium end caps Finish: matt aluminium, brushed-steel-effect aluminium, RAL 9010 polished white aluminium, raw aluminium Other...

Open the catalog to page 5
LA PENSILINA - 6

LA PENSILINA - ETA (EUROPEAN TECHNICAL ASSESMENT) EOTA Member Institute for Construction Technologies National Research Council Via Lombardia 49 - 20098 San Giuliano Milanese - Italy tel: +39-02-9806.1 - Telefax: +39-02-98280088 e-mail: segreteria.itab@itc.cnr.it European Technical Assessment www.eota.eu European Organisation for Technical Assessment Organisation Européenne pour l’évaluation technique GENERAL PART Trade name of the construction product “La Pensilina” made of: Base Rail Clamping System Structural laminated safety glass Safety cams Product family to which the construction...

Open the catalog to page 6
LA PENSILINA - 7

LA PENSILINA - ETA (EUROPEAN TECHNICAL ASSESMENT) Logli Massimo S.p.A. has checked the strength and durability of the system by carrying out all the tests necessary to obtain the ETA (European Technical Assessment). Voluntary document containing the performance of a construction product; issued to products for which, in the absence of a harmonized standard, a European Assessment Document (EAD) or an ETAG is available as a reference. The release of ETA, as well as the definition of special EADs, are the responsibility of the Technical Assessment Body - TAB. The ITC is TAB designated on many...

Open the catalog to page 7
LA PENSILINA - 8

LA PENSILINA - PARAMETERS FOR THE DESIGN IMPORTANT: SNOW LOAD and WIND LOAD must be evaluated according to Eurocode 1 or specific norm in such application, depending of: geography and building form: Geography - Morfology - Elevation - Building geometric parameters Characteristic Values for Resistance to Snow Load Glass type Characteristic Values for Resistance to Wind Load Glass type Table 2 - Snow Load Resistance of the Types Tested Table 3 - Wind Load Resistance of the Types Tested The Snow Load and Wind Load values refer to the configurations validated by the ETA. The tables contain the...

Open the catalog to page 8
LA PENSILINA - 9

LA PENSILINA - PARAMETERS FOR THE DESIGN Overhang [cm] 50 50 Higher values of the axial load are related to the Wind Loads for which in ETA 19/0181 there are no validated configurations Table 5 - Axial load in kN resulting on each anchorage as a function of the overhang and the wind load - Axial load on the anchors in kN: the abacus indicates the values of the resultant force on each anchorage with respect to the overhang and WIND load, assuming 5 fixings per meter (distance between holes i = 200 mm). - WIND load in kg/m2: the wind load is defined in the Norms according to factors such as:...

Open the catalog to page 9
LA PENSILINA - 10

LA PENSILINA - INSTALLATION INSTRUCTIONS

Open the catalog to page 10
LA PENSILINA - 11

LA PENSILINA - INSTALLATION INSTRUCTIONS RIGHT LEFT

Open the catalog to page 11
LA PENSILINA - 12

The images and information contained in this catalogue are to be considered indicative and may be subject to variations without prior notice LOGLI MASSIMO SpA Via Chemnitz, 49/51 59100 Prato - Italia Tel. +39.0574.701035 Fax +39.0574.527574 www.loglimassimo.it export@loglimassimo.it info.lm@saint-gobain.com Executive Partner / Corporate Partner Fornitore Ufficiale ASSOCIATED PARTNERS

Open the catalog to page 12

All Logli Massimo Spa catalogs and technical brochures

  1. Intro

    25 Pages

  2. MECCANOGLASS

    28 Pages

  3. CRISTAL

    22 Pages

  4. REGTER

    8 Pages

  5. Shower kit

    88 Pages

  6. Doccia Flat

    20 Pages

  7. DQ Carré Noir

    20 Pages

  8. LM Doccia

    16 Pages

  9. Doccia UV

    16 Pages

  10. Imbotte

    16 Pages

  11. LMGW Series

    24 Pages

  12. LM Series

    34 Pages

  13. LMS Series

    24 Pages

  14. LMTR Series

    26 Pages

  15. UV Bonding

    44 Pages