Glass partitions
32Pages

LOGLI MASSIMO SAINT-GOBAIN SYSTEMS FOR GLASS PARTITIONS PROFIX f

LOGLI MASSIMO PROFIX S€RI€S OXY STYLE - Licence no GEAL - Licence no.740 PROFIX - CLASS 10 Minimum anodising thickness 10 micron Suitable for indoor installations

PROFIX DOOR 66 - PROFIX DOOR 810 SERIES

LOGLI MASSIMO PROFIX DOOR 66 - PROFIX DOOR 810 S€RI€S PROFILE FOR GLASS DOORS FIXED ON GLASS WALLS FOR THICKNESS FROM 8 TO 13.52 mm Material: extruded aluminium Features: suitable for all glasses compatible with Profix profiles. Wall glass thickness from 8 to 13.52 mm. It can be matched with all the hinges of our production. Matching with CER4AL, CER4ALSQ hinges Art. Dimensions Door glass Wall glass Q.ty PROFILE FOR GLASS DOORS FIXED ON GLASS WALLS WITH HIGH THICKNESS FROM 16.76 TO 21.52 mm Material: extruded aluminium - Features: suitable for all glasses compatible with Profix profiles....

LOGLI MASSIMO PROFIX DOOR 66 - PROFIX DOOR 810 S€RI€S JOINING FRAME FOR PROFILES Material: AISI 304 steel Features: Frame for 90° joining of Profixdoor 66 on Profix profiles and of Profixdoor 810 on Super Profix profiles. It also allows a 90° joining of Profixdoor 66 (or Profixdoor 810) profiles one to another. Grub screws included. Kit composed of 4 pieces. Finish: raw stainless steel Art. Dimensions PROFILE ALIGNMENT FRAME Material: POM Features: Additional frame to keep the Profixdoor 66 and Profixdoor 810 profiles perfectly aligned on the 90° junction. Kit composed of 4 pieces. Finish:...

PROFIX DOOR 66 SERIES - KIT FOR WALL MOUNTING PDMUR66 - WALL MOUNTING KIT Material: aluminium profile, aluminium template, stainless steel frame Features: Kit for wall fastening profile PROFIXDOOR66 Important: only PROFIXDOOR66 profiles are suitable In this case, order 1 kit In this case, order 2 kits

PROFIX DOOR SERIES - KIT PROFIX DOOR 100 KIT Material: aluminium Features: Lock kit Art.APRO1203 single key plus pair of hinges Art.CER4AL. For glass 8/12 mm. Wall plate included. Finish: matt aluminium, brushed stainless steel effect aluminium. Other finishes on demand GLASS CUT-OUT Wall plate (Supplied) GLASS CUT-OUT

LOGLI MASSIMO PROFIX DOOR S€RI€S - KIT PROFIX DOOR 300 KIT Material: aluminium Features: Lock kit Art.APRO2203 single key plus pair of hinges Art.CER4ALSQ. For glass 8/12 mm. Wall plate included. Finish: matt aluminium, brushed stainless steel effect aluminium. Other finishes on demand

LOGLI MASSIMO

LOGLI MASSIMO PROFIX DOOR S€RI€S - KITPROFIX DOOR SQUARED STANDARD KIT Art. H L M C Ic Opening Q.ty

PROFIX DOOR SERIES

PROFIX DOOR SERIES

PROFIX DOOR SERIES PROCESSING TYPE A

LOGLI MASSIMO PROFIX DOOR S€RI€S - ORDER FORMFILLING MODE FOR CUSTOM PROCESSING ON PROFIX DOOR REQUEST FORM STEP 1: Select the type of opening STEP 3: Select the installation type of the side A and B STEP 6: Specify the quantity Note: the technical office is responsible for checking feasibility e-mail: export@loglimassimo.it

LOGLI MASSIMO GUIDE TO THE PROFIX DOOR SERIES ORDER KIT FOR A CUSTOM DOOR Finishes: matt aluminium, brushed stainless steel-effect aluminium Door glass thickness [mm] L1 =[mm] L2 =[mm] The suggested kits fit the dimensions (2xL1 + L2) less than or equal to 5800mm. (Custom solutions in case of dimensions higher than 5800mm) Profile dimensioning will be performed by taking into account the following clearances (with door fully closed) between intrados and glass door: 5 mm between glass bottom edge and ground, 4 mm to the other three sides. All dimensioning is made according the CER4AL hinges...

PROFIX DOOR 66 - PROFIX DOOR 810 SERIES Step 1: Set the door frame Step 2: fix the Profix profile Prepare the profiles with cuts at 45° Insert the frames at 90° Insert the frames into the specific slot and tighten the screws NOTE: make Ø10 mm holes on the Profix profiles to tighten the frames’ grub screws Step 3: Insert the pre-fitted intrados onto the profix Step 4: Insert the glass Insert the doorjamb into the frames (previously screwed on the profix) and tighten the grub screws Insert the glass into the frame Step 5: Close the profiles Profix A, B, C, D, E Finish the installation by...

PROFIX SERIES

PROFIX SERIES U-SECTION ALUMINIUM PROFILE Material: extruded aluminium Features: 3000/6000 mm long aluminium profiles with round edges and internal joint for easier drilling. Finish: matt aluminium, brushed stainless steel-effect aluminium, raw-finish aluminium, (polished aluminium only available in 3000 mm), 21 4 other finishes on demand Minimum package 5 pcs also mixed U-section profile caps PROFIXTPU NOTE: Each GTUP can be replaced with the corresponding GTUPG embossed PROFIX1630 PROFIX1660 Dimensions 21 x 30 x L 3000 mm 21 x 30 x L 6000 mm 21 x 30 mm - U-section profile caps CLIP-ON...

LOGLI MASSIMO PROFIX S€RI€S U-SECTION ALUMINIUM PROFILE Material: extruded aluminium Features: 3000 mm long aluminium profile for use in continuous walls with perimertrically framed panels. The profile Art. PROFIX4272, placed between glass and wall must be inserted perpendicularly inside the "U" profiles (e.g. PROFIX1630, PROFIX2130, PROFALL1425, PROFALL1440). Finish: matt aluminium, brushed stainless steel-effect aluminium, polished aluminium, other finishes on demand Minimum package 5 pcs also mixed 11 6±0 4^_ H-SECTION ALUMINIUM PROFILE Material: extruded aluminium Features: 3000 mm long...

PROFIX T SERIES PROFIX T CONNECTING PROFILE Material: extruded aluminium Features: three or four way aluminium connecting profile. The system is made up by joining the two PROFIX T1 and PROFIX T2 profiles with the PROFIX 2130 or PROFIX 2160 profile. The self-tapping screws connect the profiles T1 and T2 to the female of the PROFIX 2130, while the male of the latter is snapped on. PROFIX2130 not included to be ordered separately. If required, an additional PROFIX 2130 profile can be connected, thus creating a 4-way connection. Finish: matt aluminium, brushed stainless steel effect aluminium,...