Adhesive seals
8Pages

SHOWER WALL SEALS 8/10/12 mm

ADHESIVE SHOWER WALL SEALS 8/10/12 mm ADHESIVE SHOWER WALL SEALS CHARACTERISTICS OF THE BIADHESIVE TAPE Biadhesive tape in transparent acrylic foam, 3M VHB™, dimensions 5x0.5 mm. Resistance to peeling 2.1 N/mm (up to 90 °C) 100% of the seal after 72 hours. 90% of the seal after 24 hours. 50% of the seal after 20 minutes. We suggest applying the Biadhesive tape to cold surfaces (at least 10 °C). To increase adhesion, we suggest using a primer. NOTES ON CORRECT USE - Prepare the surfaces by cleaning with specific products. - Remove the liner and apply the seal to the edge, being sure to keep...

ADHESIVE SHOWER WALL SEALS 8/10/12 mm 45° ADHESIVE MAGNETIC SEAL Material: Rigid/plasticised coextruded PVC. Biadhesive tape in VHB transparent acrylic foam -Three-pole magnet. Maximum operating temperature 70 °C - High UV ray resistance. Finishes: transparent, black Minimum order 10 pcs also mixed Finish Transparent Black Transparent Black Q.ty 1 Pair 1 Pair 1 Pair 1 Pair Art. Dimensions Glass Finish Q.ty

LOGLI MASSIMO ADHESIVE SHOWER WALL SEALS 8/10/12 mm ADHESIVE SEAL WITH STRAIGHT FIN Material: Rigid/plasticised coextruded PVC. Biadhesive tape in VHB transparent acrylic foam. Maximum operating temperature 70 °C - High UV ray resistance. Finishes: transparent, black. Minimum order 10 pcs also mixed Art. Dimensions Glass Finish Q.ty ADHESIVE SEAL WITH WIPE AND DRIP RAIL Material: Rigid/plasticised coextruded PVC. Biadhesive tape in VHB transparent acrylic foam. Maximum operating temperature 70 °C - High UV ray resistance. Finishes: transparent, black Minimum order 10 pcs also mixed Art....

LOGLI MASSIMO PRODUCTS FOR CLEANING AND PREPARING SURFACES DEGREASING WIPE Characteristics: Disposable wipe, soaked in isopropyl alcohol FIXGLASS 1000 Prepares surfaces for gluing Product for cleaning glass to be glued. IT IS a concentrated alcohol-based solvent with concentration greater than 99% Cleans and degreases glass, metal, and marble. Equipped with ON/OFF nozzle. PRODUCT WITHOUT EXPIRY STORE IN A CLEAN AND SHADED PLACE. WE SUGGEST USING TNT CLOTHS FOR APPLICATION WARNING: WE SUGGEST USING GLOVES PRODUCT FOR PROFESSIONAL USE Art. Description Q.ty FX1000 Prepares surfaces for gluing...

LOGLI MASSIMO PRODUCTS FOR CLEANING AND PREPARING SURFACES TNT CLOTH Product for cleaning glass to be glued. Doesn't leave residue on the surface. Used with the FIXGLASS1000 products, it removes dirt, grease, without leaving marks FXTNT01 TNT Cloth for cleaning surfaces to be glued - 400 x 250 mm - 50 Pieces 1 Pack 3M™ VHB SILANE GLASS PRIMER Description: adhesion promoter, it contains silane to prepare the glass for VHB adhesive application. Procedure: - The surface to be treated must be clean, smooth and dry. - Dampen a cloth with the primer. - Apply the primer to the surface to be glued,...

LOGLI MASSIMO

The images and information contained in this catalogue are to be considered indicative and may be subject to variations without prior notice LOGLI MASSIMO SpA Via Chemnitz, 49/51 59100 Prato - Italia Tel. +39.0574.701035 Fax +39.0574.527574 www.loglimassimo.it export@loglimassimo.it info.lm@saint-gobain.com Executive Partner / Corporate Partner Fornitore Ufficiale ASSOCIATED PARTNERS