Safe- T- Perf Product Brochure
12Pages

Perforated Standard Patterns Perforated Metal

Perforated Standard Patterns Standard Perforated Patterns Perforated Standard The following pages outline the standard range of perforated sheets available ex-stock from Locker Group locations around Australia. Standard sheets are listed in hole configurations (round, square etc), then material types and thicknesses for each pattern. Locate the part you require using the patterns (shown as actual size). Find the pattern in the tables on the following pages, selecting the appropriate material, thickness and sheet size (where possible). Please note: > tock sheets are available in a standard...

d Standard Patterns Perforated Standard Patterns R09551 Centres 14.30 Open Area 40% Centres 30.16 Open Area 40% Centres 15.88 Open Area 49% Centres 11.18 Open Area 43% F10236 Centres 15.24S Open Area 36%

Perforated Standard Patterns Perforated Standard Standard Perforated Patterns Key to Table ROUND HOLES - Zincalume (ZU) Pattern No. RO4851 Available in Std Sheet size. (2440mm x 1220mm) 63 Open Diameter Centres Area % 4.76 1220mm wide coil Multiple Sizes Available 6’ x 4’, 8’ x 3’, 8’ x 5’, 10’ x 3’, 10’ x 4’, 10’ x 5’, C4, C5 Aluminium stock is available in metric size sheets only, eg 2400mm x 1200mm ROUND HOLES - Aluminium† (A5) ROUND HOLES - Stainless Steel 304 (S4) ROUND HOLES - Zincanneal (ZA) * Open Centres Area % 6.74 5.59 6.35 ROUND HOLES - Zincseal (ZS) Pattern No. R01637 R02141...

d Standard Patterns Perforated Standard Patterns Codes for Slot Direction SLOTTED HOLES Pattern Hole Open No. Dimension Centres Area % Mild Steel (MS) 25.4 x 6.35 11.18 L25443 EB:6.35, 43% code A SB:4.83 CODE CODE BE CODE E CODE G CODE FA CODE G CODE B CODEB CODE HA CODE E J CODE J CODE F B CODE K CODE K CODE A E CODE E CODE J CODE B CODEF G CODE FE CODE K CODE H CODE J CODE FG CODEH CODE K K CODE J CODE H DIAMOND HOLES Pattern Hole Open Area No. Dimension Centres % .6 Mild Steel (MS) D05619 5.56D CLUB & ROUND - FANCY Pattern Hole Open No. Dimension Centres Area % Mild Steel (MS) F10236...

SQUARE HOLES - STAGGERED CENTRES SQUARE HOLES - SQUARE CENTRES SQUARE ON DIAGONAL HOLES - STAGGERED CENTRES ROUND END SLOT ■ STRAIGHT CENTRES ROUND HOLES ■ 60' STAGGERED CENTRES ROUND HOLES - STAGGERED JUMP OVER PATTERN ROUND HOLES - SQUARE CENTRES ROUND HOLHS - LL?JOT ' Ol F;LKi CH.^.iLL. ARLA WIDTH Of PERFORATED AREA SIDE BRIDGE HOLE DIAMETER

d Standard Patterns Perforated Standard Patterns Custom Perf Capabilities The following is a sample of Locker Group’s custom perforating capabilities. Refer to your local branch for material type, size and thickness available. Specific patterns can also be developed to suit your application. Round Hole Hole Size %Open Area Orientation STG STG STG STG STG JUMP JUMP STG JUMP STG STG JUMP JUMP STG SQR STG STG SQR JUMP JUMP SQR45˚ STG JUMP STG STG STG JUMP JUMP JUMP STG STG STG STG JUMP JUMP JUMP JUMP STG JUMP STG STG JUMP JUMP STG STG STG STG STG STG STG JUMP JUMP JUMP STG SQR JUMP SQR STG STG...

Available in standard sheet sizes (24 0 0 x 12 0 0) or custom made.

The profiles listed on this page are a small example of our capability. Locker Group can vary open area, tooling arrangements and/or hole sizes to suit your regui

Safe-T-Perf® is available in various hole sizes and patterns, to suit the particular application and can be easily custom fabricated to particular sizes or requirements. Its light weight minimises the structural supports required, while still offering excellent load bearing characteristics. It can be confidently specified in heavy traffic areas. Internal or external installations are equally well suited, and will only influence the choice of material and/or coating. The 360° design ensures Safe-T-Perf® offers a highly effective non slip surface, even if foot traffic continually changes...

All testing was carried out in accordance with AS/NZS 4600:2005 COLD-FORMED STEEL STRUCTURES where three (3) repeat tests were conducted on each plank/loading/span configuration. Materials tested for the determination of the steels tensile properties were conducted in accordance with AS 1391 -2007 METALLIC MATERIAL TENSILE TESTING AT AMBIENT TEMPERATURE. All tests conducted at a NATA accredited laboratory. For results of the latest slip resistance tests, visit our website. Technical Datasheet LIF-105 Walkway Slip Resistance.

Perforated Standard Patterns DRAGONSCALE Project: QE11 Car Park Architect: Designinc (Perth) Builder: Probuild Photographer: Rob Burnett Locker Group Pty. Ltd. Email: info@locker.com.au Website: www.locker.com.au TOLL FREE 1800 635 947 MELBOURNE • SYDNEY • BRISBANE • TOWNSVILLE • DARWIN • ADELAIDE • PERTH • AUCKLAND • WELLINGTON • CHRISTCHURCH Locker Group reserves the right to make technical changes without notice. September 2015 Dragonscale is an example of Locker Group's ability to work closely with a designer to achieve a