• Gripspan • Shurgrip • Safe T Perf • Roof Tread

LOCKER) group Locker Group manufactures a broad range of options for safe access and flooring solutions for mining, industrial, manufacturing and commercial applications. This Planking brochure covers: • Plank sizes & options • Load tables • Fixing clips & accessories • Application and Installation Guides • Plank sizes & options • Load tables • Panel sizes & options • Load tables Roof-Tread ™ - Access Walkway

Gripspan Gripspan planking; is manufactured locally, and available in: • 6000mm stock lengths (5800mm in NZ) or custom manufactured • 225 or 300mm wide planks and/or stair treads • 65mm or 100mm* leg height • Plain, Serrated, Slotted, and Slotted Dimpled profiles • Untreated mild steel (MS), Galvabond (G), or hot dipped galvanised (HDG) (Australian Standard AS/NZS 4680) as standard • Lightweight aluminium (A)** for water treatment plants and coastal environments • 1.2 or 2.0mm material thickness, depending on profile choice When installed to specifications Gripspan is compliant with ASNZ 1657...

Profiles Standard 225mm plank width: (1.2Standard or 2.0mm thickness) 65mm or 100mm leg height Standard 225mm plank width: (1.2 or 2.0mm thickness) 65mmStandard leg height or 100mm 300mm plank width :2.0mmor 2.0mm thickness) 65mm leg height (1.2 thickness) 65mm leg height 225mm plank width: (1.2 :or 2.0mm thickness) 65mm or thickness) 65mm or 100mm leg height 300mm plank225mm(1.2 or width: (1.2 or 2.0mm 100mm leg height width plank 300mm plank width : (1.2 or 2.0mm Serrated (SR) thickness) 65mm leg height 300mm plank width : (1.2 or 2.0mm thickness) 65mm leg height Serrated Serrated (SR) (SR)...

Kgs per gs per K lin metre standard 6m length NB: Figures in Red are for maximum safe working load Figures in Black are for normal working load, based on span/200 or 10 mm, whichever is the least U = Safe uniformly distributed load in kilopascals C = Safe line load normal to plank width in kilonewtons D = Deflection in millimetres Spans in tables are clear spans between supports. Recommended minimum support 25mm (40mm preferred). Figures in Load Tables apply to single simply supported planks. Multiple planks correctly installed and joined would have a higher load capacity.

Application Advice Please find below a suggested Gripspan product and profile for a variety of standard applications. Please note, this is not the only option, Locker Group can provide other product and spanning combinations based on the exact requirements of your specific project. Consult your Locker Group technical sales representative for advice on your exact requirements. Condensor Platforms Condensor Platforms Elevated Water Tower Platform Roof Access Walkway Mezzanine Flooring Rail Bridge Access Walkway Mining – Various platform / Walkway All ranges pending requirements Sale Yard – Auctioneers...

Installation Guide Gripspan Planking is cost effective; in both material and installation. The light-weight planks are easy to handle, meaning Gripspan can be handled by two people. Utilising the Gripspan Roof Tread system will ensure even difficult roof pitches are easy to access. Gripspan is roll formed, and hence the planks are available in virtually any transportable length, and can be easily welded or clamped into place to suit many applications. Panels can be supplied in pre-bolted modules, or fabricated to suit individual applications and fixing methods. The following information is designed...

Fixing Clips & Accessories Anchor Device Clip Splice Plank Part No. ADC. This clip is shaped to fit into the diamond shaped surface openings of the grating. Clip comes separately or can be supplied with a M8 x 75mm cup head bolt assembly. M8 x J-Bolt is a simple way of fastening panels to supports from the underside of the grating. Part No. HT65100 (1.2mm thick) A bolt on kick plate available ex-stock in 3 metre lengths. Holes pre-punched at 480mm intervals. Use M10 x 20mm bolts. Part No SP65 or SP100 (dependent on leg height) Used for joining continuous sections together in runs over clear spans;...

Carrier Plates Part #s CPL65 ssories Gripspan Accessories Gripspan Accessories Carrier Plates CPL100 es CPL65 Planking Fixing#s Part #s & Accessories Clips Shurgrip Part #s Part #s Part Part #s Part #s CPL100 Part #s Part Carrier #s Gripspan Accessories ories Carrier Plates Carrier Plates Plates n Accessories SGCP 225/40 ipspan Accessories Gripspan Accessories GripspanAccessories Gripspan Carrier CPL65 Clamp Assembly Accessories Assembly Shurgrip Plates Part #s Part #s Hold Down Clamp Assembly CPL65 CPL65 Hold Down Clamp SGCP 225/50 Part #s Part #s Part #s p Assembly Part #s Part #s #s #s CPL65...

Standard Stair Treads Shur-Grip standard planks are manufactured and available in: 225 or 300mm wide planks and stair treads 6075mm length standard plank (5800mm in NZ) 2.0 or 3.0mm steel thickness 40 or 50mm leg heights Galvabond, untreated mild steel & hot dipped galvanized 0 * For detailed drawings visit the website. 40 or 50 Shur-Grip Carrier Plates (SGCP) • • • Weld to plank ends 150 or 204 Suitable for joining planks end to end with M10 x 20mm bolt assemblies Used for fabrication of stair treads Shur-Grip Toe Boards Plate Shur-Grip Carrier End Standard toe boards are available to suit both...

Kgs per Kgs per lin metre standard plank (6075mm) Kgs per gs per K lin metre standard plank (6075mm) U = Safe uniformly distributed load in kilopascals C = Safe line load normal to plank width in kilonewtons D = Deflection in millimetres Shur-Grip Hold down clamp assembly (SGHDC) • An effective means of mechanically fastening Shur-Grip to support without drilling into structure • Shur-Grip anchor discs are also available separately for use with self drilling screws for fastening directly into support structure

LOCKER) group Safe T Perf™ offers an attractive and safe flooring alternative, with 360° slip resistance, for continually changing traffic direction. Safe T Perf is available in: • 3 Profiles; Stiletto - 6, Universal -14, Stock Crate -19 • Sheets Planks and Stair Treads* • Powder coated, Mild Steel, 304 & 316 Stainless Steel, Hot Dip Galvanized or Aluminum. Safe-T-Perf™ Plank NOMINAL WIDTH = 305mm PLANK HEIGHT = 56mm Unifomily Distributed All Load Tables & drawings based on standard 2.5mm Mild Steel * Stair treads and planks can be supplied with end gussets and fixing holes * Test data on slip...