Perf Stock Patterns
5Pages

{{requestButtons}}

Catalog excerpts

Perf Stock Patterns - 1

Perforated Standard Patterns Perforated Standard Patterns

Open the catalog to page 1
Perf Stock Patterns - 2

Perforated Standard Patterns Perforated Standard Patterns Perforated Standard Perforated Standard Patterns Patterns Perforated Standard Patterns Standard Patterns The following pages outline the standard range of perforated sheets available ex-stock from Locker Group locations around Australia. Standard sheets are listed in hole configurations (round, square etc), then material types and thicknesses for each pattern. Locate the part you require using the patterns (shown as actual size). Find the pattern in the tables on the following pages, selecting the appropriate material, thickness and...

Open the catalog to page 2
Perf Stock Patterns - 3

Perforated Standard Patterns Perforated Standard Patterns Perforated Standard Perforated Standard Patterns Patterns Perforated Standard Patterns Key to Table ROUND HOLES - Zincalume (ZU) RO4851 Available in Std Sheet size. Available in Std and listed sheet size 6’ x 3’ (1830mm x 915mm) only 6’ x 4’ (1830mm x 1220mm) only 7’ x 3’ (2135mm x 915mm) only 8’ x 3’ (2440mm x 915mm) only C3 915mm wide coil C4 1220mm wide coil C5 1525mm wide coil 63 63 64 73 83 Open Diameter Centres Area % 4.76 Pattern Hole No. Dimension Centres Mild Steel (MS) 19.00 x 3.00 22.00 L19141 EB:3.00 code F SB:3.00 25.4 x...

Open the catalog to page 3
Perf Stock Patterns - 4

Perforated Capabilities Perforated Standard Patterns Perforated Standard Perforated StandardPerf Standard Patterns Patterns Custom Patterns Perforated Metal Orientation The following is a sample of Locker Group’s custom perforating capabilities. Refer to your local branch for material type, size and thickness available. Specific patterns can also be developed to suit your application. Round Hole Hole Size %Open Area Orientation STG STG STG STG STG JUMP JUMP STG JUMP STG STG JUMP JUMP STG SQR STG STG SQR JUMP JUMP SQR45˚ STG JUMP STG STG STG JUMP JUMP JUMP STG STG STG STG JUMP JUMP JUMP JUMP...

Open the catalog to page 4
Perf Stock Patterns - 5

Perforated Standard Patterns DRAGONSCALE Project: QE11 Car Park Architect: Designinc (Perth) Builder: Probuild Photographer: Rob Burnett Locker Group Pty. Ltd. 2 Cojo Place, Dandenong South, Victoria 3175 Australia. ABN 99 004 353 922 Phone: +61 3 8791 1000 Fax: +61 3 8791 1099 Email: info@locker.com.au Website: www.locker.com.au TOLL FREE 1800 635 947 MELBOURNE • SYDNEY • BRISBANE • TOWNSVILLE • DARWIN • ADELAIDE • PERTH • AUCKLAND • WELLINGTON • CHRISTCHURCH Locker Group reserves the right to make technical changes without notice. AUGUST 2013 Dragonscale is an example of Locker Group's...

Open the catalog to page 5

All LOCKER Group catalogs and technical brochures

  1. LOOKBOOK2018

    19 Pages

  2. LOOKBOOK 2019

    12 Pages

  3. FRP Grating

    4 Pages

  4. tufflex

    4 Pages

  5. Pix Perf

    4 Pages

  6. Metex

    9 Pages

  7. Antiquita II

    11 Pages

  8. Safe T-Perf

    2 Pages

  9. Alu-tread

    2 Pages

Archived catalogs