Handrail Brochure

Product catalog summary

Materials
Mild Steel and Aluminium are the primary materials used for handrails. Mild Steel is available in medium (3.2mm) and heavy-duty (4.0mm) walls, while Aluminium is preferred for corrosive environments like coastal areas.

Finishes
Options include Mill finish/Black (no coating), Galvanised (to AS/NZS 4680 standards), and Painted (wet or dry) to specific colours.

Benefits
Handrails are sold in components for on-site installation, supplied as fabricated panels, economical, quick to install, and lightweight.

Styles
Standard (two rail), Multi-Rail (three to six rails), and Balustrade (top and bottom rail with 12mm rods at 100mm centers).

Panelisation
Handrails can be supplied in panels for fast and efficient installation, reducing site labor costs and providing a professional finish.

Weld Options
Options include fully welded and galvanised, tack welded and galvanised, or galvanised components with cold galved after fabrication.

Tubular Ball Handrail System
This system is safe, strong, and simple, suitable for quick erection in workshops or on-site, compliant with AS1657, and used in various industries.

Installation Tips
Stanchion centers for steel should be a maximum of 2000mm, and for aluminium, 1800mm. Welding and slip joint specifications are provided for both materials.

Specifications
Details on stanchions and rails, including dimensions and materials, are provided for both medium and heavy-duty applications.

Product Weights
Weights for various stanchion types, bends, pipes, and kickplates are listed.

Balustrades
Compliant with Australian and New Zealand building codes, designed to prevent climbing or falling through panels.

Self Closing Gates
Available in single or double configurations, with or without kickplates. Ordering requires specific information such as swing direction and stanchion type.

Bends
Standard and non-standard bends are available, with specifications for radius and leg lengths.

Base Plates
Details on standard, angle, and corner mounting plates, including pre-drilled drain holes.

Mounting Bracket Specifications
The document outlines the dimensions for a single-hole mounting bracket, specifically focusing on the dimension 'D' for various stanchion types. The grating height is categorized into different ranges: Nil, 20-25-32, 40-45-50, and 60-65 mm. For stanchion types P, W, and C, the dimension 'D' varies from 40 mm to 100 mm depending on the grating height. For stanchion types S and SO, 'D' ranges from 115 mm to 175 mm.

Additional Components
Handrails: Includes standard handrails and 2-ball stanchions, with options for standard or non-standard bends.
Kick Plate: Details on side offset stanchions and stair treads are provided.
Grating Options: Includes FRP, expanded mesh, and gripspan.
Angle Closure Bend: Specifications for kneerail are mentioned.

Material Specifications
Steel and aluminum are specified for certain components, with specific mentions of bends and handrails.

Key Measurements
100 mm centers of 12 mm bars are noted, with repeated references to R140 and 300 or nominal measurements.

Catalog excerpts

Handrail Tubular Ball Handrail System Locker Group’s tubular ball handrail system is a safe, strong simple barrier solution. The complete system lends itself to be quickly and economically erected in either a workshop or on site. Manufactured in accordance with AS1657 and used extensively throughout the mining, petro-chemical, mineral processing and heavy industries, the system is equally suited in commercial, local government and general applications. Locker Group handrail is available in component form. eg. stanchions, bends, pipe and kickplate or can be supplied in fully fabricated panels...

Open the catalog to page 2

AM SAR/SAL Product AMW Description Angle Angle Side Angled Mounted Mounted Right/Left Code Welded Side Offset Angle Right Left MS Galv PA Heavy Duty Platform MS Galv Angled CA WA Alum UOM Cored Welded Angle Stanchion Type PA AMW Side Offset Platform S S Angle Right Left Stanchion Type Angled SC Stanchion Type SC Medium Duty (Standard) • 48.3 OD – 40mm NB • 3.2mm Gauge ea • 76mm OD Ball ea Heavy Duty ea • 48.3 OD – 40mm NB IG ea In Ground • 4.0mm Gauge ea • 76mm OD Ball ea Aluminium ea • 50mm OD ea • 38mm ID ea • 76mm OD Ball ea Stanchion Type SOAL One Rail Stanchions Stanchion Type SOAR SOAR...

Open the catalog to page 3

Standard Stanchions Standard Stanchions PC Platform Stanchions Corner Platform Corner Side Conve Side Conveyo SOAR/SOAL SAR/SAL Side Angled Side Offset W SO Left Right/Left Side OffsetAngle RightWelded SOAR/SOAL SAR/SAL Side Angled Side Offset Angle Right Left Right/Left AMW Angle Side Mounted Welded Conveyor AMW Angle Mounted Welded C Cored S90 Side 90 C Cored

Open the catalog to page 4

Side Offset IG IG In Ground PA In Ground Platform CA WA Cored Welded WA SOAR/SOAL CA Angle Angle Cored Welded Side Offset Angle Angle Right Left Angle AR/SAL ide Angled R/SAL C Cored e Angled ight/Left ht/Left Side SOAR/SOAL PA Conveyor SOAR/SOAL PA Platform AMSide Offset AMW SAR/SAL Angle Offset Side Angle Right LeftAngle Side Angled Platform Angled Mounted Right/Left Angle Right Left Mounted Angled Welded ORS DOSO ORS DOSO One Rail Side DOSO R5 Chain Hook Chain Hook Chain Hook One Rail Side DOSO One Rail Handrail Handrail One Rail Platform Platform One Rail Welded Angle Doso ORWA DOSO One Rail...

Open the catalog to page 5

Standard Stanchions Platform Corner Side Conveyor Side Offset UNIVERSAL BEAMS SAR/SAL Side Angled Right/Left Side Offset Angle Right Left CORNER MOUNTING PLATE All Base Plates 10mm Thick Material Hole Sizes 17.5mm Typical ANGLE MOUNTING ONLY One Rail Stanchions ORWA One Rail Welded 32NB Angle Max 1500mm ORWA DOSO One Rail Welded Angle Doso Chain Hook Max When ordering a self closing gate1500mm the following information is required. • Swing direction • Stanchion type • Stanchion centres • Plan view of gate in-situ showing rail direction Eg. HGATE SE swing Type P at 1200mm (stanchion centres) One...

Open the catalog to page 6

Standard & Non Standard 90º Bends Angle Closure Bends Standard & NonStandard Bends • Standard 140mm radius 300 or nom. or nom. 300 300mm leg 0 14 Non-std 140mm • R radius nominated leg Angle closure bends have 140mm radius bends, with 300 /200 mm legs at 457mm centres. Angle closure bends are made to order to the nominated angle, between 1º and 45º. 30 3.2mm thick pipe 300 or nom. 140mm radius 300 or nom. 40 R1 Bends have 300mm/260mm legs at 457mm centres Horizontal Closure Bends Special angles are made to suit customer’s requirements. Always specify angles as shown, either A or B. *Please note:...

Open the catalog to page 7