decorative cement coatings offer tasteful alternatives to traditional concrete riba product selector E LIVING CONCRETE www.livingconcrete.co.uk

MICRO-CEMENT & COATINGS MICROCEMENT SYSTEM COMPOSITION – Micro Concrete Powder – Liquid Concentrate or water – Water based Sealer – Acrylic Wax or RESIFAN PU K12 MicroCement is an exterior lining that can be applied to any hard surface, both indoors and out – furniture, walls, floors. The cement and quartz based product is at most 2mm thick. This smooth finish makes it ideal for a modern, minimalist design that can be easily combined with materials like wood and ceramic. THICKNESS – Between 1 and 2 mm SUBBASE – It should be secure and free of moisture – There can be no rising or negative humidity...

MicroConcrete is a slightly thicker surface than MicroCement at 2-3mm, and is ideal for tougher environments such as shops and exteriors. Like MicroCement, you can apply MicroConcrete to interior and exterior surfaces, with no need for joins or breaks. It can be applied over existing materials and reduces the time needed for application and maintenance. MicroConcrete has a smoother finish and is more slip-resistant than MicroCement but offers an equally clean and simple way of renovating your home or workspace. MICROCONCRETE SYSTEM COMPOSITION - Micro Concrete Powder - Liquid Concentrate or water -...

FLUIDCONCRETE SYSTEM COMPOSITION FluidConcrete is a self-levelling indoor cement floor coating, 2-3mm thick and can be installed on top of all types of hard surfaces. FluidConcrete is ideal for high-traffic environments such as shops, schools and restaurants. It's a modern, tasteful alternative that entirely cuts out the dirt and disruption of traditional construction. This product has a smooth, Polished-Concrete-like finish, that makes it perfect for a modern, minimalist design that can be easily combined with materials like wood and ceramic. You can apply FluidConcrete to interio surfaces,...

AQUACRETE SYSTEM COMPOSITION – Bi-Component: AquaCrete Powder and Liquid AquaCrete AquaCrete is a cement and quartz based lining with colour, developed specifically for use in swimming pools, fountains, bodies of water and basins. It is 2 to 3 mm thick and the finish is similar to MicroConcrete. It can be combined with MicroCement and MicroConcrete to achieve continuous surfaces and can be used on new or existing swimming pools allowing for quick renovation. THICKNESS – Between 2 and 3 mm SUBBASE – It should be secure and free of moisture – There can be no rising or negative humidity – There...

NEOCONCRETE SYSTEM COMPOSITION NeoConcrete coating is recommended for use in shopping centres, small industries and hotels among other high traffic places. Mosaic or granitic with cement, quartz and resin-based colour, 4 mm thick, and made on site. Its most common uses are on highly resistant decorative flooring and polished finishes. It is a combined system of PieDrex (Stone clad Facing + MicroCement (Sheet Asphalt. - Quartz + Resifan + MicroConcrete Powder + Liquid Concentrate + Sealer + Wax THICKNESS - Between 3 and 5 mm SUBBASE - It should be secure and free of moisture - There can be no...

OXICRETE Oxicrete is an acid system used to patinate and oxidize cement surfaces, mortars or concrete dams. Applied on cement surfaces it gives it a rusty iron or stone look, and is ideal for transforming old concrete surfaces. It is a very good alternative to Corten steel, with the advantage of being less expensive. It can be applied to MicroCement, MicroConcrete, ThinCrete and Smoothed Concrete. Get a vintage look and give your rooms an original touch! OXICRETE SYSTEM COMPOSITION -BICOMPONENT Liquid SUBBASE - Cement areas, mortars or fully cured concrete - In fine mortars it can be applied...

RESIFAN SYSTEM COMPOSITION Tri-component: Resin Comp A + Comp B + load Resifan coating is a self-levelling continuous coloured resin which is 2-3 mm thick. It is ideal for environments where continuity, a smooth finish and low maintenance are essential. It’s method of application means continuous floors can be achieved in large dimensions and are highly resistant to wear. Resifan can be applied in homes as well as industrial spaces and shops and can be applied over existing finishes. Unlike other coatings, such as MicroCement or MicroConcrete, Resifan does not streak and therefore it’s an ideal...

RevoColuor is a fine textured cementitious based plaster, with colour, 5mm thick. The coating has a similar finish to either Paris Stone (fine texture) or Morelia (coarse texture). It is for indoor and outdoor use exclusively on walls. In just one step you can replace fine plaster with patching plaster and paint, saving both time and costs because no additional colour is required. REVOCOLOUR SYSTEM COMPOSITION One component: RevoColour Powder THICKNESS - Between 4 and 5 mm AVAILABLE FINISHES - Paris Stone - Morelia SUBBASE - It should be secure and free of moisture -There can be no rising or...

COLOUR RANGE AquaCrete, FluidConcrete, MicroCement, MicroConcrete, NeoConrete, Resifan, Revocolour Misty White Victorian Pink Natural Pink Navy Grey Cement Grey Steel Grey Tempest Grey Alpine Green Autumn Green Revocolour Finishes Oxicrete Colour Range Paris Stone Caribbean Sand Versatile Grey Loyal Blue

Living Concrete reserves its right to make any and whatever changes necessary to the products and the present catalogue, with no notice and at any time. It declines furthermore any responsibility for any errors contained therein, and for any printing or editing errors. Technical data and colours are purely for reference purposes. There may be discolorations, color variances, cracks and dimensional differences which result from the nature of concrete. The size and distribution of pits on items surfaces is unique and random. Discoloration resulting from air humidity changes is a natural feature...