Litokol X11 IMPROVED CEMENTITIOUS ADHESIVE WITH NO VERTICAL SLIP AND EXTENDED OPEN TIME FOR THE INSTALLATION OF CERAMIC AND PORCELAIN TILES AND NATURAL STONES ON INTERIOR AND EXTERIOR WALLS AND FLOORS. SUITABLE FOR OVERLAYING AND UNDERFLOOR HEATING. PRODUCT WITH VERY LOW VOLATILE ORGANIC COMPOUND EMISSION RATE. ADVANTAGES / FEATURES • Product with very low volatile organic compound (VOC) emission rate. Complies with class EC1PLUS according to the EMICODE protocol and class A+ (Émission dans l’air intérieur - French Regulations) • Maintains excellent workability over time, without any bothersome thickening • Allows the installation of ceramic, porcelain and mosaic wall coverings without the need for plastic spacers • Suitable for installation on heating screeds • Suitable for overlaying on existing flooring 20 kg bags - 1,200 kg standard pallet Intended uses Interiors - exteriors Floors and walls Underfloor heating Façades Overlaying Terraces and balconies Residential, public, commercial building For example, it can also be used to install suitable materials in the following areas: Interior floors in residential and public/commercial settings (pedestrian areas) Substrates Longest allowable tile side (cm) Cement or Litocem/Litocem Pronto-based non-heating screeds up to 90 Cement or Litocem/Litocem Pronto-based heating screeds up to 60 Sulphate-based (anhydrite) non-heating screeds (1) up to 90 Sulphate-based (anhydrite) heating screeds (1) up to 60 Cast-in-place concrete (2) up to 90 Pre-existing tiled, mosaic, stone, agglomerate substrates (3) up to 60 Pre-existing substrates with organic adhesive residue (4) up to 30 Substrates waterproofed with Hidroflex, Aquamaster EVO, Elastocem, Coverflex, up to 30 Litoproof Plus Interior floors in public/commercial and industrial settings with heavy traffic Substrates Longest allowable tile side (cm) Cement or Litocem/Litocem Pronto-based non-heating screeds up to 60 Cast-in-place concrete (2) up to 90 Pre-cast concrete up to 30 Pre-existing tiled, mosaic, stone, agglomerate substrates (3) up to 30 Pre-existing substrates with organic adhesive residue (4) up to 30 Substrates waterproofed with Hidroflex, Aquamaster EVO, Elastocem, Coverflex, up to 30 Litoproof Plus Suitable materials Ceramic and porcelain tiles Double fired Single fired Terracotta - Clinker Marble – Granite – Stone Natural stones Ceramic and vitreous mosaics Porcelain stoneware Cementitious adhesives Suitable substrates Cement screeds Self-levellers Skim coats Existing tiles Waterproofing systems Underfloor heating systems Concrete Gypsum Fibre cement slabs Gypsum and anhydrite Aerated concrete Plasters

Interior walls in residential, public/commercial and industrial settings Substrates Longest allowable tile side (cm) Lime/cement plaster up to 90 Gypsum-based plaster (1) up to 90 Cast-in-place concrete (2) up to 60 Pre-cast concrete up to 60 Pre-existing tiled, mosaic, stone substrates (3) up to 30 Substrates waterproofed with Hidroflex, Aquamaster EVO, Elastocem, Coverflex, up to 30 Litoproof Plus Fibre cement and cement panels up to 30 Waterproof and non-waterproof gypsum slabs (5) up to 30 Elements in autoclaved aerated concrete (6) up to 90 Exterior floors in residential, public/commercial...

• Intended use and operating conditions Butt joints are not allowed. Any plastic spacers must be removed before grouting. The substrates must be clean, solid, compact, crack-free, properly cured and without rising damp. If it becomes necessary to create a slope, for example on balconies or footpaths, a levelling layer can be created using suitable levelling products such as Litoplan Smart. • Excessively porous and absorbent or powdery substrates must be treated with the consolidating primer Primer C • Smooth and compact substrates such as smoothed concrete, existing ceramic or agglomerate coverings,...

be used with a variable supply water temperature between +20°C and +25°C, kept constant for at least 3 days. Then set the maximum design temperature and hold it for another 4 days. At the end of this cycle, bring the screed back to ambient temperature and install the covering (see standard EN 1264-4). Joints can be grouted after approximately 6-8 hours in the case of wall tiles and after 24 hours in the case of floor tiles. For grouting, it is possible to use the cementitious grouts Stylegrout 0-8, Stylegrout 3-20, Stylegrout Tech or the ready-to-use polymer mortar FillGood EVO, or, for grouting...

Powered by TCPDF (www.tcpdf.org) Compliance Initial tensile adhesion strength after 28 days Tensile adhesion strength after water immersion Tensile adhesion strength after heat action Tensile adhesion strength after freeze/thaw cycles Open time Slip Resistance to alkalis Resistance to solvents Resistance to acids Data detection at temperature +23 °C, R.H. 50% and with no wind. May vary depending on the specific conditions of the installation site. Data Sheet n. 001/A Revision n. 7 Date: January 2021 The information and provisions contained in this technical data sheet reflect our best experience....