X-Tone Satin Technical Specifications Water-based colour-enhancing protective coating with a controlled satin finish. Gently revives the colour of ceramic and natural stone surfaces whilst preventing excessive shine. Product description X-Tone Satin is a water-based protective stain- and dirt-resistant impregnating agent with a controlled satin finish, used to slightly intensify the colour of textured ceramic or natural stone cladding whilst avoiding excessive shine. The treated materials are protected against oil, grease, dirt, drinks, etc. This application facilitates routine maintenance by reducing surface friction and preventing dirt from penetrating. The product is UV-resistant and can therefore be used on both internal and external surfaces on dry materials. Suitable for indoor and outdoor applications It enhances the tone and colour of the surfaces to which it is applied UV-resistant and weatherproof Does not form a surface film High penetration capacity Excellent stain- and dirt-resistant properties Water-based product exempt from transport hazard classifications Suitable for treating medium-to-high absorbent surfaces and raw, textured or bush-hammered materials, such as natural stone (including aged stone), cobblestones and rough surfaces. Technical Specifications

The product dries within a few hours and guarantees excellent long-term durability without forming a surface film. Product specifications Appearance Colour Odour Customs heading Responsible packaging Shelf life Liquid White Light 3824100010 1-litre recycled plastic bottles 24 months in the original packaging, away from heat sources and direct light. Application Specifications Working time pH Specific gravity Application Permissible application temperatures Coverage 5–10 minutes 8-9 1.00 kg/l Brush, roller or pad From +5°C to +35°C 10–15 m2/l Shake well before use. On clean, dry surfaces, apply...

Powered by TCPDF (www.tcpdf.org) Legal notices The information and specifications contained in this technical data sheet are based on our best experience. However, as we are unable to directly influence site conditions or the execution of the works, these are general guidelines which do not in any way bind our Company. We therefore recommend carrying out a preliminary test to verify the product’s suitability for the intended use; in any case, anyone intending to use it is required to determine whether or not it is suitable for the intended use and, in any event, assumes all liability that may...