X-Prime® Technical Specifications Anti-dust consolidating fixative and primer for treating cementitious and plaster surfaces prior to the installation of tiles and MicroCemento® Product description A primer consisting of a water-based microemulsion of synthetic resins, characterised by high penetration into porous substrates such as: cementitious and anhydrite screeds, cementitious and gypsum-based plasters, plasterboard panelling, etc. X-Prime® is ready to use, ensures quick and easy application and is solventfree. EPD Environmental Product Declaration Gel Adhesives Self-levelling compounds Levelling compounds Cement-based plasters Cement-based screeds Cement-based plasters Plaster Anhydrite Technical Specification

Consolidation of dusty and loose surfaces Reduction in substrate water absorption Insulation for gypsum and anhydrite substrates Limitations As the product is based on synthetic resins in an aqueous dispersion, it is sensitive to freezing. During transport and storage of the packaging, ensure that the temperature does not fall below +5°C so as not to compromise the quality of the product Before application, use a hygrometer to check that the residual moisture content in the substrate does not exceed 0.5% in the case of gypsum- or anhydrite-based substrates Do not apply the product to damp surfaces...

Coverage Notes Mechanically once the product has hardened. Application by roller or brush: ~ 100–300 g/m2 Data recorded at a temperature of +23 °C, 50% RH and in the absence of ventilation. These may vary depending on specific site conditions. In accordance with standard UNI 11493-1, substrates must be mechanically sound and free from crumbly parts, grease, oil, paint, wax and rising damp. Residues of cement, lime, plaster or old adhesives can be removed mechanically by sandblasting, abrasion or other suitable techniques. Cement-based plasters must be allowed to cure for at least one week per...

Powered by TCPDF (www.tcpdf.org) determine whether or not it is suitable for the intended use and, in any event, assumes all liability that may arise from its use. Always refer to the latest updated version of the Technical Data Sheet, available on the website www.litokol.com Specification item #The treatment of cementitious and plaster surfaces prior to the laying of tiles and Microcemento® will be carried out using a water-based primer, applied by roller or brush, such as X-Prime® by Litokol Lab S.p.A. Product details No. 539 Revision No. 0 Date: 04 25 Litokol Lab Spa Via G. Falcone 13/1 42048...