A fast-setting, self-polymerising, quartz-reinforced structural self-levelling compound with controlled expansion and crack-resistant properties; a super-fluid, self-compacting compound with very low cement content, for levelling and filling thicknesses from 1 to 20 Product description A fast-setting, self-polymerising, quartz-reinforced structural self-levelling compound with controlled expansion and crack resistance, a super-fluid, selfcompacting compound with an extremely low cement content. X-Plan 1-20 levels and fills gaps from 1 to 20 mm in new or existing substrates and produces a smooth finish (Superflat Finish). It is suitable for levelling existing floors and subfloors for both electric and hot-water underfloor heating systems. EC1 Plus Gev Emicode A+ Indoor air emissions EPD Environmental Product Declaration LCA results for Global Warming Potential - Greenhouse Gases (GWP-GHG) Impact category Unit A1-A3 C1 C2 C3 C4 D 1 - X-Plan® 1-20 Technical Specifications

Self-levelling compounds Levelling Compounds Existing tiles Radiant heating systems Concrete and reinforced concrete Fibre-cement sheets Lightweight panels Uses Interior Heated screeds Sulphate/anhydrite-based screeds SPA and Hammam Indoor wet areas (bathrooms, showers) Industrial flooring Residential, public and commercial construction Limitations Do not use too much water when mixing: excessive amounts of water will prolong curing times and may lead to the formation of cracks and delamination, as well as powdery and inconsistent surfaces Do not mix excessive quantities of the product: the pot...

Cleaning of equipment Coverage With water when the product is fresh. Mechanically once the product has hardened. 1.7 kg/m2 per mm of thickness Technical Specifications

Flexural strength after 28 days Compressive strength after 28 days Bond to concrete after 28 days Preparation of In accordance with standard UNI 11493-1, substrates must be mechanically btt sound and free from crumbly parts, grease, oil, paint, wax and rising damp. substrates Cement-based plasters must be allowed to cure for at least one week per centimetre of thickness. Cement-based screeds must have a total curing time of at least 28 days or be laid using the innovative X-Floor and X-Floor Pro crack-resistant screeds. Dusty, porous and absorbent substrates must be treated with X-Prime®, an...

The mixture is poured directly onto the substrate. To apply the product, use a smooth steel trowel or squeegee to achieve the desired thickness. The product can also be applied using plaster pumps. The subsequent laying of ceramic tiles, parquet, resilient flooring and textiles can be carried out after approximately 3 hours, depending on the thickness applied and the ambient temperature. When laying parquet, ensure a minimum thickness of at least 3 mm and check the moisture content using a carbide hygrometer before bonding (maximum moisture content = 2%). Underfloor Heating: at least 4 days after...

Powered by TCPDF (www.tcpdf.org) For further information, please contact Litokol’s Technical Customer Service on +39-0522-622811 or via [email protected] Safety Information For the safe use of our products, please refer to the latest version of the Safety Data Sheet, available at www.litokol.com PRODUCT FOR PROFESSIONAL USE Legal notices The information and specifications set out in this technical data sheet are based on our best experience. However, as we are unable to directly influence site conditions or the execution of the works, these are general guidelines which do not in any way...