X-Level® 0-10 Technical Specifications A quick-setting, self-curing, thixotropic, quartz-reinforced structural levelling compound with anti-shrinkage and controlled expansion properties to prevent cracking, with an extremely low cement content, for levelling and smoothing floors and walls prior to the installation of porcelain stoneware, natural stone, parquet, microcement, resins and resilient flooring. Product description A quartz-reinforced, thixotropic structural levelling compound, non-shrinking and with controlled expansion to prevent cracking, fast-setting and selfcuring, with an extremely low cement content, for smoothing, levelling and creating gradients even in damp, constantly wet and underwater areas such as swimming pools, terraces and showers prior to the installation of porcelain stoneware, natural stone, parquet, microcement, resins and resilient floor coverings. X-Level 0-10 levels and fills gaps ranging from 0 to 10 mm in new or existing substrates, creating a smooth finish. It is suitable for levelling screeds for both electric and hot-water underfloor heating systems Classified as CT C30 F6 – EN 13813 CT C30 F6 EN 13813 EC1 Plus Gev Emicode A+ Indoor air emissions EPD Environmental Product Declaration LCA results for Global Warming Potential – Greenhouse Gases (GWP-GHG) Technical Specificat

Impact category Unit A1-A3 C1 Climate change GWP-GHG kg CO0 eq 3.33 4.38 Substrates Screeds Self-levelling compounds Levelling Compounds Plaster and skim coats Existing tiles Radiant heating systems Concrete and reinforced concrete Plasterboard Plaster and anhydrite Fibre-cement sheets Uses Interior - exterior Floors - walls Overlay Swimming pools and fountains Terraces and balconies SPA and Hammam Indoor wet areas (bathrooms, showers) Facades Industrial flooring Residential, public and commercial construction Limitations Do not use too much water when mixing: excessive amounts of water will...

Specific gravity of the mixture 2.10 kg/dm3 Pot life About 50 minutes Applicable thicknesses From 0 to 10 mm Application Trowel Permissible application temperatures From +5°C to +35°C Ready for foot traffic 3 hours Drying time before laying ceramic tiles and 3 hours natural stone Waiting time before laying resilient flooring 12 hours and parquet Operating temperature From -30°C to +90°C Cleaning of equipment With water when the product is fresh. Mechanically once the product has hardened. Flexural strength after 28 days Compressive strength after 28 days Bond to concrete after 28 days Preparation...

If the product is applied using a plastering pump fitted with a vertical-axis mixer, the amount of mixing water must be the same as for manual preparation, and the mixture must be mixed until completely homogenised before application. Technical Specifications

The mixture is poured directly onto the substrate. To apply the product, use a smooth steel trowel or squeegee to achieve the desired thickness. If thick layers are required over large areas, it is advisable to create levelling strips using X-Level 0-10 and then level the surface using a metal straight edge resting against the strips. For a smoother surface finish, use a sponge trowel once the product has started to set and is sufficiently hardened. A levelling coat may be applied approximately 3 hours after the first coat has been applied. The subsequent laying of ceramic tiles and natural stone...

Powered by TCPDF (www.tcpdf.org) Safety Information For the safe use of our products, please refer to the latest version of the Safety Data Sheet, available at www.litokol.com PRODUCT FOR PROFESSIONAL USE Legal notices The information and specifications set out in this technical data sheet are based on our best experience. However, as we are unable to directly influence site conditions or the execution of the works, these are general guidelines which do not in any way bind our Company. We therefore recommend carrying out a preliminary test to verify the product’s suitability for the intended...