OTTO Agente lisciante X-GL SMOOTHING AGENT. Smoothing agent for smoothing the surface of silicone, polyurethane and MS hybrid polymer grout. ADVANTAGES / FEATURES 0.264 qts. (250 ml) bottles (boxes with 15 pcs) FIELDS OF APPLICATION PREPARATION OF SUBSTRATES Ideal for surface smoothing of grouting on ceramic and porcelain stoneware tiles and vitreous mosaics. For use with marble and other natural stones, we suggest using OTTO X-GLM Marble Silicone Smoothing Agent. If a smoothing product is used immediately after sealing, any water streaks that have formed must be removed. If only cleaned later, permanent streaks may remain. The smoothing agent must not leave traces and dry on the grouting joint and nearby surface because the dried residue could affect the appearance (matte/pale stains). Generally speaking, we recommend using the smoothing product sparingly, so, for example, only dampen tools for smoothing very slightly or apply the smoothing product in targeted areas with a clean brush on the surface to be grouted. Any residual smoothing agent must be removed with clean water before it has time to dry. Before use, check the compatibility of the product with the adjacent surfaces, such as wood. given the large number of factors which influence the treatment and the application of the product, the user should always perform a test treatment and application. SAFETY INFORMATION Consult the product safety data sheet, available on request. PRODUCT FOR PROFESSIONAL USE Ready to use Does not harm skin thanks to the dermatologically tested active ingredients Can be diluted with water Does not affect the surface brightness of the grout The colored pigments are not removed from the grout by water The surfaces to be bonded and grouted must be clean and any foreign substance must be eliminated which could affect bonding, such as loose parts, preservatives, grease, oil, dust, water, traces of old adhesives or grouts. Cleaning non-porous surfaces: clean with OTTO Cleaner T (drying time about 1 minute) and a dry fiber-free cloth. Cleaning porous surfaces: clean the surfaces mechanically, e..g with a steel brush or a smoothing disc to remove loose particles. Spread the product at temperatures between 40°F and 95°F In warm climates, keep the packaged product in a cool and dry place away from the sun before use Not suitable for marble and other natural stone The interaction and compatibility with the adhesives and grouts has been tested and approved by our technical help service • Do not use the product for applications not stated in this technical sheet • If in doubt, contact the Litokol S.p.A Technical Help Service. Elastic grouts

Powered by TCPDF (www.tcpdf.org) IDENTIFICATION DATA Appearance Customs code Shelf life Clear liquid 34022090 12 months in original packaging in a dry place. Protect against frost. APPLICATION DATA Mix ratio Water dilution ratio Acceptable application temperatures How to clean equipment Ready-to-use product without the need for any preparation. 2: 1 From +50°F to +95°F (0°C to +35°C) With water when product is fresh. Mechanically when product has set. 50 g/m2 (1.7oz/yd2) Data detection at temperature +73.4°F (+23 °C ), R.H. 50% and with no wind. May vary depending on the specific conditions of...