X-Gel® Technical Specifications Fluidotixo® polymer gel (1st generation) – C3, low-cement content, for the installation of tiles, porcelain stoneware and natural stone. Product description Fluidotixo® polymeric gel (1ageneration), formulated with a low cement content (<29%), for the installation of tiles, porcelain stoneware and natural stone indoors and outdoors. Designed for high application reliability and thanks to state-of-the-art properties, the mixture is extremely creamy, fluid and thixotropic; it maintains its shape and thickness on both floors and walls with 100% wetting power, is resistant to vertical slippage and has an open time exceeding 40 minutes. It delivers high performance when applied as an overlay on existing surfaces, ensuring superior adhesion even on difficult substrates, long-lasting durability and easy application thanks to its gel properties. Classified as C2TE – EN 12004 Modified polymers Low Portland cement content <29% Hybrid engineered hydraulic binders Latest-generation cellulose under our own licence High mineral aggregate content X-Gel® embodies Litokol’s ongoing scientific progress. It is designed using innovative raw materials to improve the installation experience, enhance safety and reduce environmental impact. Technical Specif

LitoGel® technology Adhesion Strength - High-performance MiX Classification Mix Class Level of smoothness Lightness index C1 - Thick / Paste-like Requires more force to apply Standard C2 - Medium Consistency It does not run and offers good Standard C3 - Fluidotixo Slippery and thixotropic Light C4 - Fluidotixo Dinamico Highly flowable and thixotropic Light C5 - Fluidotixo Anti-Fatigue Ultra-smooth and thixotropic Ultra Light Gel Performance Class 3 - Fluidotixo® Mix Fluidotixo® Mix - Smooth-flowing, thixotropic and lightweight: spreads easily with a trowel, retains its shape and thickness without...

EC1 Plus Gev Emicode A+ Indoor air emissions EPD Environmental Product Declaration LCA results for Global Warming Potential - Greenhouse Gases (GWP-GHG) Impact category Unit A1-A3 C1 C2 C3 C4 D Materials Porcelain stoneware Ceramic tiles Marble - Granite - Stone materials Natural stone Ceramic and glass mosaics Terracotta - Klinker Insulating and sound-absorbing panels for interiors Self-levelling compounds Levelling Compounds Plaster and skim coats Plasterboard Plaster and anhydrite Existing tiles Radiant heating systems Waterproofing products Fibre-cement sheets Concrete Uses Adhesive - levelling...

Limitations Refer t0 national standards, such as UNI 11493 Ensure a full bed outdoors or under high loads Protect the tiled surface from heavy rain for at least 24 hours Temperature, ventilation, substrate absorption and installation material may affect the workability and setting times of the gel Do not add water to the mix once it has started to set Do not use on concrete that has not been adequately cured Do not use on gypsum- or anhydrite-based substrates without first applying Do not use on timber or wood-based composites Do not use on metal, rubber, PVC or linoleum surfaces Do not use where...

Drying time for grouting Ready for foot traffic Commissioning Operating temperature Cleaning of equipment Coverage Coverage Coverage Coverage Coverage Notes Wall: 6–8 hours – Floor: 12 hours 12 hours 5 days From -40°C to +90°C With water when the product is fresh. Mechanically once the product has hardened. 3.5 mm trowel: ~ 1.8 kg/m2 6 mm trowel: ~ 2.5 kg/m2 8 mm trowel: ~ 3 kg/m2 10 mm trowel: ~ 3.5 kg/m2 Double coat: ~ 5 kg/m2 Data recorded at a temperature of +23 °C, 50% RH and in the absence of ventilation. These may vary depending on specific site conditions. In accordance with standard...

To ensure the gel adheres perfectly to the substrate, apply a thin, even coat of the mixture using the smooth side of the trowel and, immediately afterwards, apply the desired thickness using the notched side. The notching of the trowel must be chosen according to the size of the material to be laid and the substrate. In accordance with the UNI 11493-1 standard, use the double-coating technique, applying the Gel to the back of the tiles as well to ensure they are fully saturated when laying in outdoor areas or in areas subject to particularly high stress. To ensure complete transfer of the gel...

Grouting, sealing and maintenance For grouting, X-Color® 0-6 or X-Color® 2-12 decorative grouts can be used. To create waterproof joints with high colour fastness and superior chemical and mechanical resistance, use the decorative epoxy gels from the Starlike® range. For the elastic sealing of expansion joints, partition joints and perimeter joints, use sealants from the Pixel 3D range. For post-construction washing, cleaning, maintenance and surface protection, use the specific Litokol detergents from the X-Cleaner and Starlike® Care ranges. Due to the high adhesion, we recommend washing tools...

Powered by TCPDF (www.tcpdf.org) Product details No. 030 Revision No. 3 Date: 04 26 Litokol Lab Spa Via G. Falcone 13/1 42048 Rubiera RE Italy Tel. +39 0522 622811 [email protected] www.litokol.com Technical Specifications