X-Fix® Technical Specifications Professional adhesive with high bonding strength, zero vertical slippage and a long open time (>30 mins) for the installation of ceramic tiles on floors and walls on cementitious substrates. Thicknesses up to 15 mm. Product description Professional tile adhesive for laying tiles on cementitious substrates for both floor and wall applications. Guarantees high bonding strength, zero vertical slip and an extra-creamy thixotropic consistency. With an extended open time and an adjustment time of over 30 minutes, it develops high resistance to slippage and is suitable for thicknesses up to 15 mm. For indoor and outdoor use. Classified as C1TE – EN 12004 Thixotropic Extra creamy Extended open time > 30 mins Adjustment time > 30 mins High slip resistance EN 12004 ISO 13007 EC1 Plus Gev Emicode A+ Indoor air emissions EPD Environmental Product Declaration Technical Specification

LCA results for Global Warming Potential - Greenhouse Gases (GWP-GHG) Impact category Unit A1-A3 C1 C2 C3 C4 D Ceramic tiles Terracotta - Klinker Marble - Granite - Stone materials Natural stone Porcelain stoneware Substrates Cement-based screeds Self-levelling compounds Levelling compounds Uses Interior - exterior Residential, public and commercial construction Limitations Refer to national standards, such as UNI 11493 Ensuring a full bed in outdoor applications Protect the tiled surface from heavy rain for at least 24 hours Temperature, ventilation, substrate absorbency and the substrate material...

Appearance Powder Colour White - grey Responsible Packaging 20 kg recyclable bag Storage 12 months in original packaging in a dry place. TechnicalSpecifications Compliance Initial bond strength after 28 days Adhesion after immersion in water Adhesion following heat exposure Adhesion after freeze-thaw cycles Open time Slip Moisture resistance Alkali resistance Solvent resistance Acid resistance pH of the mixture Specific gravity ApplicationSpecifications Consistency of the mix Preparation of the grey adhesive mixture Preparation of white adhesive mixture Dough proving time Recording time Pot life...

centimetre of thickness. Cement-based screeds must have a total curing period of at least 28 days or be laid using the innovative X-Floor and X-Floor Pro anti-crack screeds. Create gradients on balconies or pavements using the new-generation crackresistant levelling compound HydroLevel® 1-30. Dusty, porous and absorbent substrates must be treated with X-Prime®, an innovative fixative and consolidant. Smooth, compact substrates, such as trowelled concrete, old ceramic tiles or terrazzo tiles, must be treated with the latest-generation adhesion promoters X-Activator® or X-Activator® Grip after...

Special Applications Marble, Natural Stone and Recomposed Stone Materials prone to deformation or staining due to water absorption require a hydro-curing gel with accelerated adhesion and fast setting, such as FastGel® or FastGel® S1+ (C2F – EN 12004), or a reactive gel such as PowerGel® Pro, FastGel® Pro or PowerGel® Pro Max (R2 – EN 12004). Even marbles and natural stones of the same type can have different characteristics. If in doubt, we recommend consulting Litokol’s Technical Customer Service in advance for detailed information or to carry out a laboratory test. Natural stone slabs with...

Powered by TCPDF (www.tcpdf.org) Legal notices The information and specifications contained in this Technical Data Sheet are based on our best knowledge. However, as we are unable to directly influence site conditions or the execution of the works, these are general guidelines which do not in any way bind our Company. We therefore recommend carrying out a preliminary test to verify the product’s suitability for the intended use; in any case, anyone intending to use it is required to determine whether or not it is suitable for the intended use and, in any event, assumes all liability that may...