X-Color® 06 Technical Specifications Extra-fine decorative grout with a silk-like finish, reinforced with polymers, for grouting high-durability joints from 0 to 6 mm in tiles, porcelain stoneware, slabs, mosaics and natural stone, on floors and walls, both indoors and outdoors. Product description Extra-fine, silk-effect decorative grout, polymer-reinforced, for highly durable 0–6 mm joints in tiles, porcelain stoneware, slabs, mosaics and natural stone, on indoor and outdoor floors and walls. Extremely brilliant and vivid colours. Water-repellent with low water absorption. Effective protection against micro-cracking, flaking and surface degradation. Greater resistance to efflorescence. Classified CG2WA – EN 13888 Proprietary formula Hybrid engineered hydraulic binders Latest-generation cellulose and rheological additives High content of micronised mineral aggregates Fine powder of pure marble Extra-fine particle size – range 20–100 µm X-Color® embodies Litokol’s ongoing scientific progress. It is designed using innovative raw materials to improve the installation experience, enhance safety and reduce environmental impact.

Performance Creamy consistency and extremely smooth application. Quick and easy to clean, designed to be applied and cleaned with ease. Can be wiped with a sponge 20-25 minutes after application. Long-lasting, stable and uniform colours: the use of top-quality inorganic pigments gives the material a bright and vivid appearance Silky-smooth joints: the use of impalpable powder made from extra-fine pure marble (20-100 pm) ensures a compact, smooth surface for easy maintenance. High adhesion to the edges of tiles. Water-repellent: grouting carried out with X-Color 0-6® repels water, helping to reduce...

Indoor wet areas – bathrooms and showers Residential, public, commercial and street furniture Technical Specifications

Responsible Packaging Shelf life Shelf life Customs heading See colour chart - I Colori della Terra 3 kg bag - Recyclable 20 kg bag 3 kg bag: 24 months in original packaging in a dry place. 20 kg recyclable bag 12 months in original packaging and in a dry place. Compliance Abrasion resistance Compressive strength after 28 days Flexural strength after 28 days Shrinkage Water absorption after 30 minutes Water absorption after 240 minutes ApplicationSpecifications Mixing ratio Mixing ratio Consistency of the mix Specific gravity of the mixture Pot life Joint width Application Permissible application...

Check that the adhesive has fully set and is dry. The joints must be dry, clean, free from dust and empty for at least twothirds of the tile thickness. Any adhesive that may have spilled during installation must be removed whilst still fresh. To fully appreciate the superior flow and creaminess of X-Color® 06, mix the product using the specified mixing ratio. Pour the correct amount of water, depending on the application, into a clean container and slowly add the powder, mixing with an electric drill fitted with a mixing paddle, until a homogeneous, lump-free mixture is obtained. Leave the mixture...

be removed using X-Cleaner or X-Cleaner Forte acid-based cleaners. Do not use X-Cleaner or X-Cleaner Forte on materials that are not acidresistant, such as marble or polished natural stone. For the elastic sealing of expansion joints, partition joints and perimeter joints, use sealants from the Pixel 3D range. For the correct maintenance and protection of surfaces, use the specific Litokol cleaning products from the X-Cleaner range. Given the variations in quality across global ceramic production (e.g. polished porcelain stoneware), the wide range of morphological types of marble and natural...

The Colours of the Earth - Colour selection curated by Piero Lissoni Colours are for illustrative purposes only. Safety Information For the safe use of our products, please refer to the latest version of the Safety Data Sheet, available at www.litokol.com PRODUCT FOR PROFESSIONAL USE Legal notices The information and specifications set out in this technical data sheet are based on our best experience. However, as we are unable to directly influence site conditions or the execution of the works, these are general guidelines which do not in any way bind our Company. We therefore recommend carrying...

Powered by TCPDF (www.tcpdf.org) Specification item High-durability grouting of joints from 0 to 6 mm, both indoors and outdoors, in accordance with UNI 11493-1 and 11714-1 standards, for floor and wall coverings comprising all types of tiles, porcelain stoneware, large-format slabs, mosaics, marble and stone materials will be carried out using an extrafine, polymer-reinforced, silk-effect decorative grout, classified as GG2WA in accordance with standard EN 13888, type X-Color® 06 by Litokol Lab SpA. Product details No. 335 Revision No. 0 Date: 04 25 Litokol Lab Spa Via G. Falcone 13/1 42048...