UltraGel® Technical Specifications Fluidotixo® - C3, a ready-to-use, flexible polymer gel for the installation of tiles, mosaics and small-format porcelain stoneware indoors. Thixotropic with a long open time. Product description Ready-to-use, flexible polymer gel for laying tiles, mosaics and small-format porcelain stoneware on indoor floors and walls. Reusable. An innovative formula consisting of 100% pure gel in an aqueous phase, cement-free, ensuring application directly onto gypsum-based substrates without the need for isolating primers. Characterised by excellent adhesion and a long working time. Designed for maximum convenience and ease of application, and thanks to state-of-the-art properties, the mixture is extremely creamy, smooth-flowing and very easy to spread, whilst maintaining high thixotropy. Classified as D1 TE – EN 12004 Elastomeric gel with a blend of styrene-acrylic resins under our own licence High content of mineral aggregates and inorganic microfillers Smart rheological stabilisers Latest-generation, highly hydrophilic cellulose UltraGel® embodies Litokol’s ongoing scientific progress Designed using innovative raw materials to enhance the installation experience, improve safety and reduce environmental impact Technical Specifica

Mix Classification Mix Class Level of smoothness Lightness index C1 - Thick / Paste-like Requires more force to apply Standard C2 - Medium Consistency Offers good workability, but runs Standard C3 - Fluidotixo Slippery and thixotropic Light C4 - Fluidotixo Dinamico Highly flowable and thixotropic Light Gel Performance High-performance, ready-to-use polymer gel Super-smooth application thanks to the 100% gel formula Highly flexible High adhesion to substrates Extended workability time Chemistry + Smart Pure H®O-based gel It does not contain cement Not hazardous to applicators according to the...

Screeds Self-levelling compounds Plaster Plasterboard Plaster and anhydrite Radiant heating systems Waterproofing products Wood Aerated concrete Fibre-cement sheets Concrete Floors – Walls Interior Radiant heating systems Residential, public, commercial and street furniture Refer to national standards, such as UNI 11493. Formulated with new-generation polymers in an aqueous dispersion, the product is sensitive to low temperatures. During transport and storage, it is essential to ensure temperature-controlled environments of no less than +5°C to preserve its advanced performance and the integrity...

Responsible Packaging Shelf life Customs heading Polymer gel paste White and Grey Second-life recycled plastic buckets: 5.10 and 25 24 months in original packaging in a dry place. Do Initial shear adhesion > 1.0 N/mm2 EN 1324 Shear adhesion after heat treatment > 1.0 N/mm2 EN 1324 Open time > 0.5 N/mm2 after 30 min EN 1346 Mixing ratio Consistency of the mix pH of the mixture Specific gravity of the mixture Open time Applicable thicknesses Application Permissible application temperatures Drying time for grouting Ready for foot traffic Commissioning Operating temperature Cleaning of equipment...

ensure the correct use of the products indicated. UltraGel® is a new-generation polymeric gel, formulated to be ready for immediate use, with no need for prior mixing. Upon opening the container, however, we recommend quickly mixing the mixture, even manually using a trowel or steel spatula, to ensure optimal homogeneity of the mixture and maximise its functional performance and application effectiveness. . To ensure the gel adheres perfectly to the substrate, apply a thin, even coat of the mixture using the smooth side of the trowel and, immediately afterwards, apply the desired thickness using...

Then set the maximum design temperature and maintain it for a further 4 days. At the end of this cycle, allow the screed to return to room temperature and lay the floor covering (see standard EN 1264-4). Grouting, sealing and maintenance For grouting, X-Color® 0-6 or X-Color® 2-12 decorative grouts can be used. To create waterproof joints with high colour fastness and superior chemical and mechanical resistance, use the decorative epoxy gels from the Starlike® range. For the elastic sealing of expansion joints, partition joints and perimeter joints, use sealants from the Pixel 3D range. For post-construction...

Powered by TCPDF (www.tcpdf.org) Specification item The installation of floor and wall coverings—comprising tiles, mosaics and small-format porcelain stoneware, shall be carried out using a ready-to-use, flexible polymer gel that is resistant to vertical slippage and has an open time exceeding 30 minutes, classified as D1TE in accordance with standard EN 12004, such as UltraGel® by Litokol Lab SpA. Product details No. 206 Revision No. 1 Date: 04 26 Litokol Lab Spa Via G. Falcone 13/1 42048 Rubiera RE Italy Tel. +39 0522 622811 [email protected] www.litokol.com Technical Specification