Technical Datasheet - Transitions, Covers & Ramps Brushed Stainless Cover - TSC Product Description A range of Brushed Stainless Steel cover strips that provides a bridge to cover joints between floorcoverings of the same or slightly differing heights e.g. carpet and carpet tiles, It ensures that joins are neat and safe as well as protecting the exposed edges of the floorcoverings. Dimensions and Colour Available in 2.7m Lengths profile widths 30 & 40mm pre-drilled and countersunk. Technical Details Stainless Steel AISI 304 / DIN1.4301 Surface BA1 C% 0.2-0.6 Mn% 2.0 Si% 0.1 P% 0.75 S% 0.045 Cr% 0.03 Ni% 18-20 N% 10.5 Surface Restoration: Advanced Cleaning for Stainless Steel Discoloration. To remove or reduce pitting damage caused by corrosion has been left unchecked for a long time. Scotchbrite works well for this purpose. Work only in the direction of the existing grain and never use steel wool. Tarnish or Water Stains: The first stage of corrosion is completely on the surface and is easily removed by most commercial metal polishes. Discoloration will be greater at indoor facilities due to the chlorine vapor trapped in an inside environment. Lightning Rusting: Rust is visible at this stage but little or no pitting has yet occurred. A stronger cleaning agent, such as Simichrome Polish, is required. Heavy Rusting: A deep coat of rust with surface pitting can develop if corrosion has been left unchecked for a long time. For advanced corrosion naval jelly is recommended. Installation 1. Measure and cut profile to desired length. For Self-adhesive, ensure floor is clean and dry, remove release paper and press firmly into position. For Pre-drilled 2. Position profile and mark the points to be drilled. 3. Drill and plug the substrate accordingly. 4. Reposition profile and fix screws into the countersunk holes in profile. P.V.C. Trim • Stair Nosings • Expansion Joints • Transitions • Seals • Edge Protection • Metal Trim • Skirting • Tools Litokol spa - via G. Falcone, 13/1 - Rubiera (RE) - Italy Tel.+39.0522.622811- [email protected] - w