TileSafe® System Technical Specifications Elastic High-Adhesion Anti-Fracture System engineered for installing large-format tiles and slabs of any type and size in high-traffic areas, including cracked substrates (movements greater than 3 mm), consisting of SafetyGel® combined with PowerGel® S1+; it dissipates and neutralises substrate movements and covering expansion and distributes heavy loads evenly without stress. Provides watertight and anti-fracture performance for waterproofing swimming pools, terraces and balconies, and prevents crack formation when installing tiles of all types and formats and natural stone. System description High-Adhesion Anti-Fracture System engineered for installing large-format tiles and slabs of any type and size in high-traffic areas, including cracked substrates (movements greater than 3 mm). The elastic TileSafe® System dissipates and neutralises substrate movements and covering expansion, and distributes heavy loads evenly without stress. Provides watertight and anti-fracture performance for waterproofing swimming pools, terraces, balconies and showers, and prevents crack formation when installing tiles of all types and formats and natural stone. The system consists of SafetyGel®, an advanced elastomeric gel membrane with watertight and anti-fracture properties, enhanced with ultra-high-density quartz microspheres and 6-dimensional multidirectional decoupling and antifracture elasticity. It provides dynamic compensation of substrate stresses and covering expansion and prevents microcracking in tile installations. It is engineered with proprietary 6-Dimensional Elasticity® technology and combined with PowerGel® S1+, a flexible duo-polymer Smart Gel enhanced with quartz microspheres, Fluidotixo®- C5 with low cement content, for installing tiles, porcelain stoneware, large slabs of all types and formats and natural stone, with double Open Time E(E), powered by proprietary Crack Prevention® technology. Compliance with ANSI A 118.12 Technical Specifi

The system can also be formed by combining the gel membrane with PowerGel® S2+, an elastic tri-polymer anti-fracture Smart Gel enhanced with quartz microspheres, Fluidotixo®- C5 with low cement content, which prevents crack formation when installing tiles, porcelain stoneware, large slabs of all types and formats and natural stone. Double Open Time E (E), double Slip Resistance T (T), powered by proprietary Crack Prevention® technology. In situations where more severe stresses are expected, TileSafe® System can be created by combining SafetyGel® with PowerGel®Pro Max, a sciencebased high-power...

6-Dimensional Elasticity® technology Crack Prevention® technology Bond Strength – Ultra-high-performance elastic, crack-resistant High-Performance Elastic Anti-Fracture System Resistance to cracking and fissuring. TileSafe® System, the High-Adhesion Anti-Fracture System, consists of SafetyGel® combined with PowerGel® S1+ to prevent compressive or tensile forces from damaging the tiles. The system comprises two different technologies: 1. SafetyGel® – a 6-Dimensional anti-fracture elastic membrane, capable of absorbing and compensating for movements in all six spatial directions before they are...

multidirectional anti-fracture protection. 2. Active crack prevention - dampens crack propagation. 3. ITZ stability – monolithic and dynamic adhesion on difficult surfaces. 4. Advanced structural elasticity - adapts to movements without any loss of adhesion performance. 5. Durability even under extreme conditions - freeze/thaw cycles, internal thermal shocks, vibrations, heavy loads. 6. Ideal for large sheets – resistant to bending, tensile stress, shearing and deformation. Focus on the TileSafe® System for eliminating movement joints. Crack isolation capacity is measured according to ANSI A...

Screeds Self-levelling compounds Levelling Compounds Existing tiles Radiant heating systems Concrete and reinforced concrete Plaster and anhydrite Fibre-cement sheets Wood and engineered wood panels Metals (drains, frames, service penetrations, ...) Plastics and PVC Fibreglass Lightweight panels Existing cement-polymer waterproofing products Interior – exterior Floors – walls Overlay Indoor wet areas, bathrooms and showers Swimming pools and fountains Terraces and balconies SPA and Hammam Facades Industrial flooring Residential, public, commercial and street furniture Areas subject to heavy footfall...

Adhesion after immersion in water > 0.5 N/mm2 A.6.3 Adhesion after thermal ageing > 0.5 N/mm2 A.6.5 Adhesion after freeze-thaw cycles > 0.5 N/mm2 A.6.6 Adhesion after contact with lime water > 0.5 N/mm2 A.6.9 Adhesion after contact with chlorinated water > 0.5 N/mm2 A.6.7 Water tightness under positive pressure of 1.5 bar No penetration; weight gain A7 Crack-bridging capacity under normal conditions > 0.75 mm A.8.2 Crack-bridging capability at very low temperatures > 0.75 mm A.8.3 Water vapour permeability (S D) Watertightness Watertightness at penetrations Crack-bridging capacity Adhesion Adhesion...

Refer to the Technical Data Sheets for SafetyGel® and PowerGel® S1+ for correct use of the products. . Refer to the Technical Data Sheets for SafetyGel® and PowerGel® S1+ for correct use of the products. . Flooring installation Refer to the Technical Data Sheets for SafetyGel® and PowerGel® S1+ for correct use of the products. . Due to the high content of adhesive polymers, it is recommended to wash tools and remove any product residue from surfaces with water before the gel hardens. Once the reaction is complete and the gel has hardened, it can only be removed mechanically. Safety Information...

Powered by TCPDF (www.tcpdf.org) after 2 hours. It requires no reinforcing mesh, tapes or perimeter bands and is classified DM 02 P according to EN 14891, such as SafetyGel® by Litokol Lab SpA, combined with an elastic tri-polymer anti-fracture Gel enhanced with quartz microspheres, Fluidotixo® Antifatica, with low cement content, which prevents crack formation when installing tiles, porcelain stoneware of all types and formats and natural stone, classified C2 TE S1 according to EN 12004, such as PowerGel® S1+ by Litokol Lab SpA. Product details No. 653 Revision No. 0 Date: 09 26 Litokol Lab...