MULTI-PURPOSE FLEXIBLE CEMENTITIOUS GROUT FOR JOINTS UP TO 20 mm IN CERAMIC TILES, PORCELAIN STONEWARE, SLABS, MOSAICS AND NATURAL STONE.WATER-REPELLENT AND EFFLORESCENCE-RESISTANT, WITH HIGH COLOUR FASTNESS; KEEPS JOINTS FULL AND UNIFORM. FOR INDOOR AND OUTDOOR USE. Product description Cementitious powder grout based on hydraulic binders, fine-grained inert aggregates, polymers, organic additives and pigments. Available in various colours (see colour chart). ADVANTAGES/ FEATURES • Product with ultra-low emissions of volatile organic compounds (VOCs). Complies with Class EC1PLUS according to the EMICODE protocol and with Class A+ (Indoor Air Emissions - French Regulations) • Complies with the requirements of class CG2WA in accordance with EN 13888 and ISO 13007-3 • A plastic, free-flowing mix with thixotropic properties • Suitable for grouting materials laid on heated screeds • Forms a solid, smooth and compact joint • Short waiting times and easy cleaning • Prevent the formation of efflorescence • Stable and uniform colours • It rapidly develops high mechanical strength, allowing foot traffic after just 4 hours • Compensated shrinkage • Over time, it retains excellent workability without developing any troublesome thickening • High abrasion resistance 1 - StyleGrout Tech Technical Specification

3 kg bags (boxes of 6) – Standard scoop 648 kg Areas of application Interior – exterior Floors and walls Underfloor heating Facades Overlay Terraces and balconies Residential, public and commercial construction Indoor wet areas (bathrooms, shower cubicles) Ponds, swimming pools and fountains SPA and Hammam Industrial flooring TILING DESIGN The durability of a ceramic tiling system can only be guaranteed through its proper design. We therefore recommend consulting the national standards in force in each country, such as the UNI 11493 standard for Italy, which provides the necessary guidance on...

• Location and layout of joints • Mechanical properties of the substrate • Intended environment and anticipated operating conditions Installation with butt joints is not permitted. Any plastic spacers must be removed before grouting. PRELIMINARY CHECKS AND PREPARATION OF GROUT JOINTS MIXING RATIO Check that the adhesive or mortar used to bond the tiles has fully cured and is dry. Grout lines must be clean, free from dust and empty throughout the full thickness of the tiles. Remove any plastic spacers. Any traces of adhesive or mortar that have seeped into the joints must be removed. If grouting...

may be partially emptied and the final grout colour will not be uniform. Any dried product marks can be easily removed from the surface of the ceramic tiles with a clean cloth once the product has set. If traces of the product are still present on the tiled surface after cleaning, they can be removed using Litoclean acid powder or Litoclean EVO liquid (refer to the relevant technical data sheets for usage instructions) approximately 6-7 days after grouting. Do not use Litoclean or Litoclean EVO on materials that are not acid-resistant, such as marble or limestone. WARNINGS • Apply the product...

Appearance Powder Colour See colour chart Shelf life 3 kg bags. 36 months in original packaging in a dry place. Keep away from frost. APPLICATION DATA Mixing ratio Dough proving time Specific gravity of the mixture Joint width Permissible application temperatures Waiting time before cleaning Ready for foot traffic Commissioning Operating temperature Cleaning of equipment Water = 26-28% (approx. 0.8 litres of water per 3 kg bag) Thixotropic creamy mortar 3 minutes 13 1.94 kg/dms About 50 minutes From 0 to 20 mm Rubber-edged trowel From +5°C to +35°C About 20 minutes 6 hours 24 hours - Swimming...

Length Width CONSUMPTION AS A SEALANT kg/m2 Thickne Joints (mm) CONSUMPTIONCALCULATION FORMULA FOR CALCULATING CONSUMPTION: (A+B)/(AxB) x C x D x 1.6 = kg/m2 To calculate usage based on different tile sizes and joint widths, please refer to the product calculator available on the website www.litokol.it 6 - StyleGrout Tech Technical Specifications

Compressive strength after 28 > 15.0 N/mm2 days Compressive strength after > 15.0 N/mm2 freeze-thaw cycles Flexural strength after 28 days > 2.5 N/mm2 Flexural strength after freeze- > 2.5 N/mm2 thaw cycles Water absorption after 30 < 2 g Water absorption after 240 < 5 g Alkali resistance Excellent Solvent resistance Excellent Acid resistance Good resistance to acids with a pH > 3 NOTES Data recorded at a temperature of +23 °C, 50% RH and in the absence of ventilation. These may vary depending on specific site conditions. The colours and images of the products are for illustrative purposes only...

Powered by TCPDF (www.tcpdf.org) Product details No. 330 Revision No. 1 Date: MAR 24 Litokol Lab Spa Via G. Falcone 13/1 42048 Rubiera RE Italy Tel. +39 0522 622811 [email protected] www.litokol.com Technical Specifications