StyleGrout 0-8 HIGH-PERFORMANCE CEMENTITIOUS GROUT FOR GROUTING JOINTS FROM 0 TO 3/8" (0 TO 8 MM) WIDE BETWEEN CERAMIC AND PORCELAIN TILES, PORCELAIN STONEWARE, MOSAICS AND NATURAL STONES. IDEAL FOR SMOOTH AND COMPACT GROUTING. FOR INTERIORS AND EXTERIORS. ZHERORISK TECHNOLOGY OFFERS VERY LOW VOLATILE ORGANIC COMPOUND EMISSION RATE. Powder cementitious grout made with hydraulic binders, inert fillers with fine granulometry, polymers, organic additives and pigments. Available in different colors (see color chart). ADVANTAGES / FEATURES • Product exhibiths Very low volatile organic compound (VOC). Complies with the most stringent Global Air Quality Regulations. • Complies with the requirements of class CG2WA according to EN 13888 and ISO 13007-3 • Plastic and fluid thixotropic mix • Suitable for the grouting of materials installed on heating screeds • Full, smooth and compact joint • Short waiting times and easy cleaning • Maintains excellent pot life over time, without any bothersome thickening • Stable and consistent colors • Resistant to mold • Water-repellent • High abrasion resistance 6.6lb (3 kg) bags (boxes with 6 pcs) - 1,587.3lb (720 kg) standard pallet 44lb (20 kg) bags - 2,645.5lb (1,200 kg) standard pallet of 60 bags Intended uses Interiors and exteriors Floors and walls Underfloor heating Facades Overlaying Terraces and balconies Residential, public, commercial building Indoor wet areas (bathrooms, shower enclosures) Tanks, swimming pools, fountains SPAS and Saunas INSTALLATION PLANNING The only way to guarantee the long-lasting performance of ceramic and porcelain tile installations is to properly plan the process. It is therefore advisable to consult the national regulations in force in each country, for example standard UNI 11493 in Italy, which provides all necessary instructions regarding the choice of materials, correct planning, use and installation, so as to ensure all quality, performance and durability standards are safely met. Some of the general precautions that need to be followed are listed below as an example. Substrates Before installation, check that substrates are clean, free of loose fragments, properly dried and cured, flat and level, and that mechanical strength requirements based on the intended use have been met. Materials Ceramic and porcelain tiles Single fired Double fired Terracotta - Clinker Marble – Granite – Stone Natural stones Porcelain stoneware Ceramic and vitreous mosaics Thin laminated stoneware slabs Large-Format tiles and panels Slabs 126x63 in (320x160 cm) Recomposed stone made with resin or ce

Worksite conditions Check the suitability of the temperature, humidity, light conditions etc. at the time of the product’s application. Materials Check that all materials used for tiling (ceramic materials, leveling systems, adhesives, grouts, waterproofing products, etc.) are suitable for the intended use and have been correctly stored. Expansion joints Check that the perimeter, expansion, divider and structural elastic joints have been correctly designed and prepared. Divider joints are normally needed for 20/25 m2 (21.9/27.3yd2) indoor sections, and 9-15m2 (9.84/16.4yd2) outdoor sections....

mixed with the Idrostuk additive in aqueous dispersion, in full replacement of the water, thus further improving the final performance of the grouting. Spread the product at temperatures between 40°F and 95°F Before application, make sure that the adhesive used to install the ceramics or mosaics has completely dried Change the cleaning water frequently Change the sponge when it is impregnated with product Protect against direct sunlight or strong air currents for the first 12 hours after application Respect the mix ratio All substrate should be structurally sound, stable, dry, clean and free...

CONSUMPTION TABLES FORMULA FOR CALCULATION OF CONSUMPTION: (A+B)/(AxB) x C x D x 8.3 = lb/ft2 A = tile length (in mm) (in inches) B = tile width (in mm) (in inches) C = tile width (in mm) (in inches) D = joint width (in mm) (in inches) In regards to the calculation of consumption for the different tile sizes and joint widths, refer to the product calculator available at www.litokol.it Standard Resistance to abrasion Compressive strength after 28 days Compressive strength after freeze/thaw cycles Flexural strength after 28 days Flexural strength after freeze/thaw cycles Shrinkage

Powered by TCPDF (www.tcpdf.org) Water absorption after 30 minutes Water absorption after 240 minutes Resistance to alkalis Resistance to solvents Resistance to acids ≤ 2 g (0.071oz) EN 12808-5 ≤ 5 g (0.18oz) EN 12808-5 Excellent Excellent Good resistance against acids with pH > 3 COLOR TABLE Data detection at temperature +73.4°F (+23 °C ), R.H. 50% and with no wind. May vary depending on the specific conditions of the installation site. The colors and images of the products are intended purely as a guideline and do not necessarily constitute a faithful representation of the originals. Form n....