Starlike Decor EPOXY DECORATIVE FINISH FOR INTERIOR WALLS Starlike® Decor is an innovative system for the creation of low thickness decorative interior wall finishes, based on the technology of the Starlike® EVO epoxy grout. ADVANTAGES / FEATURES The main advantages of Starlike® Decor are: Surface chromatic effect similar to grouting performed with the Starlike® EVO epoxy grout. It is therefore possible to create color matches between surfaces in ceramic and porcelain tiles or vitreous mosaics grouted with Starlike® EVO and the surrounding wall finishes decorated with Starlike® Decor. Using different application methods for Starlike® Decor, it is possible to create special and customizable exclusive chromatic and decorative effects on surfaces. By overlapping the different color shades in subsequent applications, infinite color combinations can be achieved. Starlike® Decor is easy and fast to apply. Using suitable equipment, it is possible to quickly obtain highly prestigious aesthetic finishes. Since this is a low thickness finish, consumption is reduced and therefore also the cost of the operation. With Starlike® Decor it is possible to decorate vertical surfaces such as rough cement plasters, gypsum panels, lightweight panels, wood panels and to overlay pre-existing ceramics or mosaics. Ideal for spas, saunas and Turkish baths. 1.8oz (50 g) package (boxes with 60 pcs) 2,645.5lb (1,200 kg) standard pallet 4.4oz (125 g) package (boxes with 25 pcs) 1,058.2lb (480 kg) standard pallet Intended uses Interiors Floors and walls Underfloor heating Overlaying on existing floors and coverings in ceramic, porcelain stoneware, mosaics, agglomerates, natural stones Residential, public, commercial building Indoor wet areas (bathrooms, shower enclosures) Spas, saunas and Turkish baths RESIN DECORATIVE SYSTEM PLANNING The only way to guarantee the long-lasting performance of resin decorative systems is to properly plan the process. It is therefore advisable to consult the national regulations in force in each country, for example standard UNI 10966 for Italy, which defines the planning and installation criteria for resinous systems for interior and exterior horizontal and vertical surfaces. Some of the general precautions that need to be followed are listed below as an example. ANALYSIS OF SUBSTRATE Suitable substrates - Multifonod EVO on: Concrete Normal and waterproof gypsum Skim coats Lightweight panels (such as WEDI-SCHLÜTER). Fiber cement slabs (such as Aquapanel) Underfloor heating systems Existing coverings in ceramic, porcelain stoneware, mosaics, agglomerates, natural stone and wood Rough cement plaster Gypsum and anhydrite Wood panels Metal Smoothed concrete Fiberglass

Vapor barrier/retarder Make sure the vapor barrier or retarder has been properly positioned under the substrate and is able to prevent rising damp that may damage the resin covering. Curing In order to be considered dimensionally stable, a substrate must be sufficiently cured. Indicatively, concrete substrates need about 6 months to cure, screeds or cement plasters need about 7 days per centimeter (inch) of thickness, and ready-mixed products depend on the manufacturer’s instructions. Integrity and compactness Assessed by visual inspection. A cement screed must be consistent and compact for its...

white surface with consistent absorption by the substrate for the subsequent application of Starlike® Decor. In the case of slightly irregular supports, it may be necessary to apply an additional coat of Multifondo EVO in order to even the surface. Once the leveling layer has been created with Multifondo EVO, wait 12 hours for it to set before sanding the surface to eliminate any ridges or unevenness. Manually or mechanically sand with 60-grit clear sandpaper, making sure to remove the dust formed at the end of the operation. Once the consistency and planarity of the surface has been checked...

(component B). Be sure to pour it in slowly as these additives are fine and light powders, and use a mixing paddle at low speed to avoid splashing the product. The Metallic Collection finishes can be applied with maximum two coats Do not use the Galaxy additive for the application of Starlike® Decor Do not use the colors Bianco Assoluto C.470 and Bianco Ghiaccio C.270 even if mixed with additives Do not use wet tools or water for leveling layers with Starlike® Decor Avoid storing the product in cans/buckets under direct sunlight or in very warm environments In warm climates, keep the packaged...

Powered by TCPDF (www.tcpdf.org) Standard Adhesion to substrate Resistance to UV rays Resistance to humidity Resistance to water Resistance to temperature fluctuations Resistance to aging Stain resistant 4.5 MPa ≥ 0.3 Mpa (217.5 psi ≥ 43-5 psi) Excellent Excellent Excellent (> 72 hours) Excellent Excellent Excellent UNI EN 15824 EN 1542 ISO 11341 With Hydrolux EVO With Hydrolux EVO COLOR TABLE Data detection at temperature +73.4°F (+23 °C ), R.H. 50% and with no wind. May vary depending on the specific conditions of the installation site. The colors and images of the products are intended purely...