Wall & Floor TWO-COMPONENT DECORATIVE RESIN FOR FLOORS AND WALLS. SUITABLE FOR OVERLAYING AND UNDERFLOOR HEATING. FOR INTERIORS. PRODUCT WITH VERY LOW VOLATILE ORGANIC COMPOUND EMISSION RATE. SpazioResina EVO is a flexible, water-based epoxy decorative system with spatula effect and very delicate shading, offering texture to the surface. ADVANTAGES / FEATURES • Product with very low volatile organic compound (VOC) emission rate, compliant with class A+ (Émission dans l’air intérieur – French Regulations) • Suitable for installation on heating screeds • Suitable for overlaying on existing flooring • Extended workability of mix (about 40 minutes), which facilitates application on large surfaces • Product exempt from restrictions for road, sea, air and rail transport • Water-based product • Smooth surface characterised by slight shading and delicate chiaroscuro effects • Product with excellent fluidity and easy to spread • Excellent resistance to wear • Available in the 27 nuances designed by Rinaldo Rinaldi for the Spaziocontinuo® palette, and on request in any colour of the international NCS and RAL colour charts Bucket part A: 4.348 kg + Can part B: 0.652 kg = Total 5 kg Intended uses Interiors Floors and walls Underfloor heating Overlaying on existing floors and coverings in ceramic, porcelain stoneware, mosaics, agglomerates, natural stones Residential, public, commercial building Indoor wet areas (bathrooms, shower enclosures) Covering of furniture and structures in wood, metal or plastic RESIN DECORATIVE SYSTEM PLANNING The only way to guarantee the long-lasting performance of resin decorative systems is to properly plan the process. It is therefore advisable to consult the national regulations in force in each country, for example standard UNI 10966 for Italy, which defines the planning and installation criteria for resinous systems for interior and exterior horizontal and vertical surfaces. Suitable substrates - Multifondo EVO on: Cement screeds Self-levellers Skim coats Lightweight panels (such as WEDI-SCHLUETER). Separation membrane Underfloor heating systems Concrete Normal and waterproof gypsum Fibre cement slabs (such as Aquapanel) Gypsum and anhydrite Existing floors and coverings in ceramic, porcelain stoneware, mosaics, agglomerates, natural stones and wood Rough cement plaster Wood panels Metal Smoothe

Some of the general precautions that need to be followed are listed below as an example. ANALYSIS OF SUBSTRATE Vapour barrier/retarder Make sure the vapour barrier or retarder has been properly positioned under the substrate and is able to prevent rising damp that may damage the resin covering. Curing In order to be considered dimensionally stable, a substrate must be sufficiently cured. Indicatively, concrete substrates need about 6 months to cure, screeds or cement plasters need about 7 days per centimetre of thickness, and ready-mixed products depend on the manufacturer’s instructions. Integrity...

Component A 87 parts by weight – Component B 13 parts by weight. The two components are pre-batched in their respective packaging. Pour all of component B into the container of component A, and mix until completely homogenised. Mix, preferably using an electric drill with mixing paddle at low speed (≈ 300/min.) until a consistent mix is obtained without lumps. Hand mixing is not recommended. The two components are pre-batched in their packaging, thus preventing mixing errors. For small surfaces, the components can be partially mixed to avoid unnecessary waste. In these cases it is advisable to...

over with ResinaArredo EVO); alternatively, clear Ottoseal S70 C.00 can be used. - if the client has chosen to combine a single component wall system with a two- and three-component floor system, Ottoseal S70 C.00 clear silicone will need to be applied along the wall-to-floor junction. • Since the product is based on synthetic resins in aqueous dispersion, it must be protected against frost. When packages are transferred and stored in a warehouse, the temperature must not fall below +5°C so as not to compromise the quality of the product • Avoid storing the product in cans/buckets under direct...

Powered by TCPDF (www.tcpdf.org) Resistance to WET slipping Resistance to DRY slipping Resistance to WET slipping Resistance to slipping (with Additivo Antiscivolo) Resistance to humidity Resistance to temperature fluctuations Resistance to ageing 37 0,38 0,88 A Excellent Excellent Excellent UNI EN 13036-4 BCRA BCRA DIN 51097 With Hydrolux EVO COLOUR CHART Data detection at temperature +23 °C, R.H. 50% and with no wind. May vary depending on the specific conditions of the installation site. The different textures of the Spaziocontinuo® surfaces have different colours, saturation and brightness....