SpazioLamina EVO #Ossidato Corten Wall & Floor THREE-COMPONENT DECORATIVE RESIN FOR FLOORS AND WALLS. SUITABLE FOR OVERLAYING AND UNDERFLOOR HEATING. FOR INTERIORS. PRODUCT WITH VERY LOW VOLATILE ORGANIC COMPOUND EMISSION RATE. SpazioLamina EVO #Ossidato Corten is a flexible, water-based epoxy decorative system that reproduces the effect of a Corten panel. The Corten effect is the natural or artificial oxidation of iron, which triggers the emergence of “controlled and desired rust”. ADVANTAGES / FEATURES • Product with very low volatile organic compound (VOC) emission rate, compliant with class A+ (Émission dans l’air intérieur – French Regulations) • Suitable for installation on heating screeds • Suitable for overlaying on existing flooring • Extended workability of mix (about 40 minutes), which facilitates application on large surfaces • Product exempt from restrictions for road, sea, air and rail transport • Water-based product • Product with excellent fluidity and easy to spread • Easy to sand • Excellent resistance to wear • Real reproduction of Corten effect Bucket part A: 2.00 kg + Can part B: 0.46 kg + Can part C: 2.50 kg) = Total 4.96 kg SpazioLamina #Ossidato Corten is obtained with the following products: SpazioLamina EVO #Ossidato Corten Bucket part A: 2.00 kg + Can part B: 0.46 kg + Can part C: 2.50 kg) = Total 4.96 kg SpazioLamina #Ossidato Corten activator: 500 ml bottle Neutralizzante EVO: 2 kg can Intended uses Interiors Floors and walls Underfloor heating Overlaying on existing floors and coverings in ceramic, porcelain stoneware, mosaics, agglomerates, natural stones Residential, public, commercial building Covering of furniture and structures in wood, metal or plastic Suitable substrates - Multifondo EVO on: Cement screeds Self-levellers Skim coats Lightweight panels (such as WEDI-SCHLUETER). Separation membrane Underfloor heating systems Concrete Normal and waterproof gypsum Fibre cement slabs (such as Aquapanel) Gypsum and anhydrite Existing floors and coverings in ceramic, porcelain stoneware, mosaics, agglomerates, natural stones and wood Rough cement p

Smoothed concrete Fibreglass 12 hours after the application of Multifondo EVO, it can be sanded with 60-80 grit sandpaper. After carefully vacuuming any dust, proceed to apply the texture. In any case, the respective technical data sheets must be consulted for correct use of the indicated products. RESIN DECORATIVE SYSTEM PLANNING The only way to guarantee the long-lasting performance of resin decorative systems is to properly plan the process. It is therefore advisable to consult the national regulations in force in each country, for example standard UNI 10966 for Italy, which defines the planning...

Component A 40.3 parts by weight – Component B 9.3 parts by weight – Component C 50.4 parts by weight. The three components are pre-batched in their respective packaging. Pour all of component B into the container of component A, and mix until completely homogenised. Delicately pour into the mix the pre-batched powder component C, mixing slowly and incorporating it consistently. Mix, preferably using an electric drill with mixing paddle at low speed (≈ 300/min.) until a consistent mix is obtained without lumps. Hand mixing is not recommended. The three components are pre-batched in their packaging,...

• Do not use the product for applications not stated in this technical sheet • Do not use the product for applications not stated in this technical sheet • If in doubt, contact the Litokol S.p.A Technical Help Service. SAFETY INFORMATION Consult the product safety data sheet, available on request. PRODUCT FOR PROFESSIONAL USE IDENTIFICATION DATA Appearance Appearance Appearance Customs code Shelf life Component A: white paste Component B: amber dense liquid Component C: metallic powder 32099000 12 months in original packaging in a dry place. APPLICATION DATA Mix ratio Mix ratio Mix ratio Appearance...

Powered by TCPDF (www.tcpdf.org) skilful artisan work of the installer, thus making the surfaces unique. Sheet n. 1103 Revision n. 0 Date: January 2021 The information and provisions contained in this technical data sheet reflect our best experience. Given the impossibility of directly intervening on the conditions of the work site and execution of the works, they represent indications of a general nature, which are in no way binding on our Company. It is therefore recommended to perform a spot test in order to check the suitability of the product for the intended use. In any case, those who...