Wall & Floor SpazioCemento EVO TWO-COMPONENT DECORATIVE RESIN FOR FLOORS AND WALLS. SUITABLE FOR OVERLAYING AND UNDERFLOOR HEATING. FOR INTERIORS. PRODUCT WITH VERY LOW VOLATILE ORGANIC COMPOUND EMISSION RATE. SpazioCemento EVO is a flexible, water-based epoxy decorative system with spatula effect, characterised by high resistance to wear thanks to its granular finish. Allows the creation of industrial and minimalist style surfaces. ADVANTAGES / FEATURES • Product with very low volatile organic compound (VOC) emission rate, compliant with class A+ (Émission dans l’air intérieur – French Regulations) • Suitable for installation on heating screeds • Suitable for overlaying on existing flooring • Extended workability of mix (about 40 minutes), which facilitates application on large surfaces • Product exempt from restrictions for road, sea, air and rail transport • Water-based product • Available in the 27 nuances designed by Rinaldo Rinaldi for the Spaziocontinuo® palette, and on request in any colour of the international NCS and RAL colour charts • Product with excellent fluidity and easy to spread • Sanding not required • Thanks to the use of Corundum granules, its surface is characterised by strong resistance to wear • Suitable and designed for residential and commercial floors subject to intense traffic • Available in the 27 nuances designed by Rinaldo Rinaldi for the Spaziocontinuo® palette, and on request in any colour of the international NCS and RAL colour charts Bucket part A: 4.348 kg + Can part B: 0.652 kg = Total 5 kg Intended uses Interiors Floors and walls Underfloor heating Overlaying on existing floors and coverings in ceramic, porcelain stoneware, mosaics, agglomerates, natural stones Residential, public, commercial building Indoor wet areas (bathrooms, shower enclosures) Covering of furniture and structures in wood, metal or plastic Suitable substrates - Multifondo EVO on: Cement screeds Self-levellers Skim coats Lightweight panels (such as WEDI-SCHLUETER). Separation membrane Underfloor heating systems Concrete Normal and waterproof gypsum Fibre cement slabs (such as Aquapanel) Gypsum and anhydrite Existing floors and coverings in ceramic, porcelain stoneware, mosaics, agglomerates, natural stones and wood Rough cement plaster Wood panels Metal Sm

RESIN DECORATIVE SYSTEM PLANNING The only way to guarantee the long-lasting performance of resin decorative systems is to properly plan the process. It is therefore advisable to consult the national regulations in force in each country, for example standard UNI 10966 for Italy, which defines the planning and installation criteria for resinous systems for interior and exterior horizontal and vertical surfaces. Some of the general precautions that need to be followed are listed below as an example. ANALYSIS OF SUBSTRATE Vapour barrier/retarder Make sure the vapour barrier or retarder has been properly...

Component A 87 parts by weight – Component B 13 parts by weight. The two components are pre-batched in their respective packaging. Pour all of component B into the container of component A, and mix until completely homogenised. Mix, preferably using an electric drill with mixing paddle at low speed (≈ 300/min.) until a consistent mix is obtained without lumps. Hand mixing is not recommended. The two components are pre-batched in their packaging, thus preventing mixing errors. For small surfaces, the components can be partially mixed to avoid unnecessary waste. In these cases it is advisable to...

• Do not add lime, cement or other foreign materials to the product • Do not mix partial quantities of the components without using a scale; different mix ratios will compromise the proper setting of the product • Spread the product at temperatures between +5°C and +30°C inclusive • The pot life is about 40 minutes at a temperature of +23°C. Be sure to mix only the quantity of product that can actually be used within this period of time • Application of the product in environments with relative humidity greater than 80% is not recommended • If the ambient temperature needs to be increased, use...

Powered by TCPDF (www.tcpdf.org) Data detection at temperature +23 °C, R.H. 50% and with no wind. May vary depending on the specific conditions of the installation site. The different textures of the Spaziocontinuo® surfaces have different colours, saturation and brightness. For each project, use materials from a single production batch. Materials from different batches may assume slightly different colours. The texture of Spaziocontinuo® is characterised by material discontinuity and natural irregularity, achieved through the skilful artisan work of the installer, thus making the surfaces unique....