*myarchiexpo

Catalogs
LITOKOL
SafetyTex Anti-Fracture

SafetyTex Anti-Fracture

Product catalog summary

Product Description: SafetyTex Anti-Fracture is a thermally modified, needle-punched polyester non-woven fabric designed for structural reinforcement of the SafetyGel membrane in the Litokol High-Adhesion Anti-Fracture System. It is free from chemical binders and enhances crack resistance, especially on external movement joints.

Substrates: Suitable for a wide range of substrates including screeds, self-levelling compounds, plaster, existing tiles, radiant heating systems, concrete, plasterboard, fibre-cement sheets, wood panels, metals, plastics, and more.

Uses: Applicable for adhesive levelling compounds on floors and walls, both interior and exterior. Ideal for wet areas, swimming pools, terraces, facades, industrial flooring, and areas with heavy footfall.

Limitations: Ensure compatibility with substrates and follow specific application guidelines.

Product Specifications: Composed of a single-component elastomeric gel with a magenta violet color. Available in recycled plastic buckets of various sizes. It complies with EN 14891 DM 02 P and ANSI A118.12 standards, with specific tensile strengths and elongation properties.

Coverage: Varies based on substrate type, requiring different amounts for concrete, plasterboard, ceramic tiles, and other materials.

Preparation of Substrates: Substrates must be cured, free from moisture, and mechanically sound. Specific primers and treatments are recommended for different substrate types to ensure optimal adhesion and performance.

Application: Cut the fabric to size, apply the first coat of SafetyGel, lay the fabric, and smooth it to remove air bubbles. Apply a second coat of SafetyGel for complete coverage.

Warnings: Only use for applications listed in the technical data sheet. For further information, contact Litokol’s Technical Customer Service.

Safety Information: Refer to the latest Safety Data Sheet for safe use instructions.

Legal Notices: The guidelines provided are based on experience but do not bind the company. Users should verify product suitability for their specific use.

Catalog excerpts

SafetyTex Anti-Fracture Technical Specifications Thermally modified needle-punched polyester anti-fracture non-woven fabric for the structural reinforcement of the SafetyGel gel membrane in the Litokol High-Adhesion Anti-Fracture System Product description Thermally modified, needle-punched polyester anti-fracture non-woven fabric, free from chemical binders, for the structural reinforcement of the continuous, watertight and anti-fracture SafetyGel elastic membrane. It blends easily during application by roller, brush, smooth steel trowel or airless spray of the first coat of gel membrane, enhancing the crack-resistant properties even on external movement joints. Screeds Self-levelling compounds Levelling Compounds Plaster and skim coats Existing tiles Radiant heating systems Concrete and reinforced concrete Plasterboard Plaster and anhydrite Fibre-cement sheets Wood and engineered wood panels Metals Plastics and PVC Fibreglass Lightweight panels Existing cement-polymer waterproofing products Technical Specifications

Open the catalog to page 1

Adhesive - levelling compound Floors - walls Interior - exterior Overlay Radiant heating systems Indoor wet areas - bathrooms and showers Ponds, swimming pools and fountains Industrial flooring Residential, public, commercial and street furniture Areas subject to heavy footfall and high stress In combination with SafetyGel® and SafetyTex Anti-Fracture Cracked substrates New, uncured substrates or substrates of a different nature Change to a different laying pattern or tile size Installation near thresholds Installation over utility trenches Installation near partition joints Responsible packaging...

Open the catalog to page 2

Point load test Coverage on concrete, plasterboard, ceramic tiles, natural stone, 1.0 kg/m2 in two coats mosaics, fibre-cement panels and timber panels Coverage on HydroLevel / ProLevel skim coats, cementitious skim 1.3 kg/m2 in two coats coats and lightweight panels with cementitious skim coat Coverage on X-Floor / X-Floor Pro screeds and cementitious 1.5 kg/m2 in three coats screeds In accordance with standard UNI 11493-1, substrates and coatings based on concrete, cement and plaster must be adequately cured and must not show signs of excessive moisture emission, condensation, efflorescence...

Open the catalog to page 3

Powered by TCPDF (www.tcpdf.org) Do not use for applications not listed on this technical data sheet For further information, please contact Litokol’s Technical Customer Service on +39-0522-622811 or via [email protected] Safety Information For the safe use of our products, please refer to the latest version of the Safety Data Sheet, available at www.litokol.com PRODUCT FOR PROFESSIONAL USE Legal notices The information and specifications set out in this technical data sheet are based on our best experience. However, as we are unable to directly influence site conditions or the execution...

Open the catalog to page 4

SafetyTex Anti-Fracture

SafetyTex Anti-Fracture

Catalog excerpts

All LITOKOL catalogs and technical brochures