Products for treating surfaces and detergents

Litocare Stone Glossy 20 Litowax Gres & Natural Stone 22 Litogrip Floor 24

Surface treatment, cleaning and finishing

To facilitate the choice of products it is important to know the characteristics of Litokol treatment products are organised into: By using specific water- and oil-repellent treatments, the surface is protected against both water-based (coffee, wine, ink) and oilbased (food-grade oil, motor oil) staining agents. Litokol offers a complete family of products specifically designed to meet the needs of those looking for professional products that are simple to use, to treat various types of surfaces: to remove stains, grout residue, protect and maintain different types of materials over time. the...

Litoseal Terrazze Litocare Matt Litostain Cleaner Litogres Protector Litogrip Floor Litostone Protector Clea ning Litocare Stone Glossy Litowax Gres & Natural Stone

Litocare Stone Glossy Litowax Gres & Natural Stone Litogrip Floor Litoseal Terrazze

Anti-infiltration water-repellent protective impregnator for terraces • Solvent-based impregnator • High penetration • Excellent water-repellent and anti-rising damp properties. The product's characteristics guarantee high-level water repellence on surfaces to which it is applied, eliminating problems caused by the penetration of water into small grooves, pores and joints. The product penetrates the inside of the laid surface, creating a barrier against rising humidity and salt damp, while allowing vapour permeation. It prevents the formation of mould and efflorescence, is UV-resistant and does...

> Apply a thin and even coat of pure product onto a clean and dry surface. After about 10 minutes, remove any excess product left on the surface using a traditional single disc machine and white disc pad or absorbent cloth. A protective treatment with matt colour enhancing effect to improve the appearance of ceramic or natural stone surfaces and epoxy and cementitious grouting • A solvent-based, stain-resistant and dirt-proof protective impregnator • Matt effect • Intensifies the colour of ceramic or natural stone coverings • Restores the colour of epoxy and cementitious grouting affected by...

> Apply the pure product onto a clean and dry surface, evening out any excesses. Leave the product to penetrate for about 10 minutes. Subsequently remove any leftover product in order to restore dryness to the surface, which should be free of any residue. Treated surface Water- and oil-repellent stain-resistant impregnator for ceramics and porcelain stoneware • Solvent-based stain-resistant impregnator • Offers stand-out and long-lasting protection, preventing staining agents such as red wine, oil, ink, coffee etc. from penetrating the pores of the material, thus allowing spillages to be promptly...

Litostone Protector > Apply the pure product onto a clean and dry surface, evening out any excesses. Leave the product to penetrate for about 10 minutes. Subsequently remove any leftover product in order to restore dryness to the surface, which should be free of any residue.

Apply a thin and consistent film of pure product on a dry and clean surface using a brush, roller or fleece. After application, wait approximately 5-10 minutes depending on the absorbency rate of the material, then spread the excess product evenly and leave to dry. Glossy effect, stain-resistant impregnator for non-glossy marble and granite, terracotta and materials with a medium-high absorbency rate • Solvent-based stain-resistant and dirt-proof protective impregnator • It creates a warm, wet effect, featuring excellent dirt-proof, scratch-proof and stain-resistant properties • Gives the surface...

Litowax Gres & Natural Stone Untreated surface SATIN-FINISH EFFECT Dilute the product with water in the case of less absorbent surfaces (porcelain stoneware, ceramics), or use in its pure form on surfaces with a medium-high absorbency rate (terracotta, stone). Apply a thin and even coat of product onto a dry and clean surface and leave to dry for about 4 hours Satin-finish effect protector for structured ceramics, stone and terracotta • A water-based satin finish polymer coating used to treat surfaces. • Offers a soft, matt effect • Gives the surface excellent dirt-proof, scratch-proof and stain-resistant...

Indicatively speaking, the contact times are: • Ceramics and stoneware: from 10 to 40 minutes. • Clinker bricks and quartz-based agglomerates: from 30 to 60 minutes. • Granite: from 60 to 90 minutes. Litogrip Floor Untreated surface Non-slip treatment for stoneware, granite, quartz and ceramic mosaics Treated surface Slip test • A water-based non-slip treatment for silica-based materials. • It reacts with the surface, creating micro escape routes for the water, facilitating drainage and increasing surface friction. Suitable for interior and exterior use on all silica-based materials such as stoneware,...

Litostain Cleaner The pure product is applied directly on the stain and left to act for 10 to 20 minutes in the case of fresh stains, or even overnight for more stubborn stains. After this time, remove the product using a clean cloth and rinse well. If there is an improvement after the first application, repeat the process using the same methods. Cleaner for coloured stains on all materials • A water-based gel cleaner for the removal of coloured stains. • Can be used on all materials. Litostain Cleaner is a versatile product that can be used on all ceramic and natural stone surfaces. It easily...

It’s not always easy to identify the type of floor stain and we often think it can no longer be removed, thus permanently ruining the surface. Don’t panic! Is your stoneware stained? Are you wondering how to clean your marble top? In this section you’ll find the answers to all your surface cleaning and maintenance problems. ZHERORISK* EVOLUTION TECHNOLOGY Zero risk for the user ✓ Non corrosive ✓ Non toxic ✓ Non-hazardous to the environment Zero risk in transportation ✓ Product without restrictions for transport by road, sea, air and rail. ✓ No ADR limitations for transport by road. ✓ No IMO containers...