PolyGel Pro Technical Specifications Ready-to-use, high-adhesion, moisture-curing, single-component MS polymer adhesive, ideal for installing LVT, SPC, PVC and other resilient floor coverings on walls and floors Product description PolyGel Pro is a high-performance, single-component MS polymer adhesive, ideal for installing resilient floor coverings on walls and floors. Thanks to its moisture-curing technology, it guarantees high shear and tear adhesion, making it perfect for LVT, SPC, roll-form PVC and other resilient floor coverings. Ready to use and with an extended open time, it allows for simple and precise installation even on absorbent and non-absorbent substrates, including those with high moisture content, and on underfloor heating systems. High performance Ultra-high-performance, ready-to-use MS polymer adhesive Moisture-curing High adhesion to all types of substrate Extended open time EC1 Plus Gev Emicode A+ Indoor air emissions Technical Specifications

Self-levelling compounds Plaster Plaster and anhydrite Radiant heating systems Non-absorbent substrates Floors - walls Interior Radiant heating systems Limitations Refer to the installation instructions provided by the flooring manufacturer Apply the product at temperatures between 10°C and 30°C Do not apply to surfaces subject to rising damp. Do not apply the product if the humidity in the work area exceeds 75% Do not add foreign materials to the product. Do not use for applications not listed on this technical data sheet. For further information, please contact Litokol's Technical Customer...

In accordance with standard UNI 11493-1, substrates must be mechanically sound and free from crumbly parts, grease, oil, paint, wax and rising damp. Cement-based plasters must be allowed to cure for at least one week per centimetre of thickness. Cement-based screeds must have a total curing time of at least 28 days or be laid using the innovative X-Floor and X-Floor Pro crack-resistant screeds. In the case of anhydrite screeds, ensure that a suitable vapour barrier is in place to prevent any rising damp. Check using a carbide hygrometer that the residual moisture content is below 0.5%. Any cracks...

Powered by TCPDF (www.tcpdf.org) Open time may vary depending on temperature, relative humidity and the absorbency of the substrate. Times will be shorter at higher temperatures and higher humidity levels; they will be longer at lower temperatures, lower humidity levels and on substrates with low absorbency. Safety Information For the safe use of our products, please refer to the latest version of the Safety Data Sheet, available at www.litokol.com PRODUCT FOR PROFESSIONAL USE Legal notices The information and specifications set out in this technical data sheet are based on our best experience....