Pixel® Precision Technical Specifications Adhesive-decorative gel, waterproof, stain-resistant and UV-resistant, for laying and grouting steps, corners and edges of all types of tiles and natural stone. Quick-setting Product description Ready-to-use, two-component adhesive-decorative gel in a cartridge for finishing corners, edges and steps, and for the rapid and durable bonding of a wide range of materials such as porcelain stoneware, marble, natural stone, granite, quartz, etc. The Gel is optimised to deliver extremely high levels of adhesion in challenging environments, high-traffic areas and on technical surfaces. Thanks to its ultra-fast curing, it allows the cutting and polishing of bonded pieces as early as 45–60 minutes after application. Waterproof, stain-resistant and UV-resistant. Excellent resistance to weathering, ageing and UV rays Ready to use Excellent adhesion without primer on all typical industrial and construction materials Quick and easy application Easy to polish Rapid curing Product subject to no restrictions on transport by road, sea, air or rail Technical Specification

Porcelain stoneware Ceramic tiles Large formats Laminated stoneware slabs Marble – Granite – Stone materials Natural stone Ceramic and glass mosaics Resin- or cement-based composites Bonding and grouting of marble, natural stone, tiles, porcelain stoneware and engineered quartz. Creating steps, corners and edges. Suitable for use in challenging environments such as external steps, balconies, terraces and high-traffic flooring. The surfaces to be sealed or bonded must be perfectly clean, dry and free from dust, grease, oils and old paint. For glossy and/or smooth surfaces, it is advisable to sand...

Customs classification Packaging Shelf life Shelf life (Crystal) Thick coloured gel See colour chart 35069190 215 ml cartridge - Packs of 2 cartridges + 4 mixers 24 months in the original packaging, away from heat sources and direct light. Keep away from frost. 20 months in the original packaging, away from heat sources and direct light. Do not expose to frost. TechnicalSpecifications Shore D hardness 80 Adhesion to ceramic after 1 hour 10 MPa Adhesion to ceramic after firing at 50°C for 12 13.5 MPa hours ApplicationSpecifications Mixing ratio Consistency of the mix Specific gravity Gel time...

Powered by TCPDF (www.tcpdf.org) Legal notices The information and specifications contained in this technical data sheet are based on our best experience. However, as we are unable to directly influence site conditions or the execution of the works, these are general guidelines which do not in any way bind our Company. We therefore recommend carrying out a preliminary test to verify the product’s suitability for the intended use; in any case, anyone intending to use it is required to determine whether or not it is suitable for the intended use and, in any event, assumes all liability that may...