Pixel® 3D Technical Specifications Pro Stain-Resistant Sealant. For bathrooms, shower cubicles, sanitary ware, kitchens, glass surfaces, window frames, doors and the sealing of non-porous materials such as glass, ceramics and aluminium. Product description Professional, acetate-curing, stain-resistant sealant for sealing permanently elastic joints between tiles, porcelain stoneware, slabs and mosaics, both indoors and outdoors, on floors and walls. 3X adhesion: formulated for application without the use of any adhesionpromoting primer, it ensures a perfect seal in bathrooms, shower cubicles, sanitary ware, kitchens, glazing, window frames and doors. Suitable for sealing expansion joints, even under severe operating conditions such as in swimming pools and on façades. Free from solvents and isocyanates. Not hazardous to applicators according to the CLP Regulation Ready to use, reusable, minimises waste and material wastage. Very low emissions of volatile organic compounds (VOCs) INT-EXT CC EN 15651-1 G CC EN 15651-2 S EN 15651-3 EC1 Plus Gev Emicode A+ Indoor air emissions Technical Specifications

Porcelain stoneware Ceramic tiles Resin- or cement-based composites Terracotta – Klinker Ceramic and glass mosaics Sheets Aluminium Sealant Floors – walls Interior – exterior Radiant heating systems Indoor wet areas – bathrooms and showers Ponds, swimming pools and fountains Terraces and balconies SPA and Hammam Facades Residential, public, commercial and street furniture Apply the product at temperatures between +5°C and +35°C In hot weather, store the product packs in a cool place away from direct sunlight before use During curing, minimal quantities of acetic acid are slowly released; therefore,...

Total permissible deformation 25% ApplicationSpecifications Polymerisation Specific gravity Film formation time Full cure in 24 hours Permissible application temperatures Recommended application temperatures Operating temperature Ready for foot traffic Set-up time Acetic cross-linking Thixotropic paste 0.99 kg/dm3 Approx. 15 minutes 2-3 mm From +5°C to +40°C From +15°C to +25°C From -40°C to +150°C 24 hours at T = +23°C 5 days at T = +23°C Remove the top of the threaded section of the cartridge, screw on the plastic nozzle and cut it at an angle determined by the desired diameter and profile....

The Colours of the Earth - Colour selection curated by Piero Lissoni Colours are for illustrative purposes only. Safety Information For the safe use of our products, please refer to the latest version of the Safety Data Sheet, available at www.litokol.com PRODUCT FOR PROFESSIONAL USE Legal notices The information and specifications set out in this technical data sheet are based on our best knowledge. However, as we are unable to directly influence site conditions or the execution of the works, these are general guidelines which do not in any way bind our Company. We therefore recommend carrying...

Powered by TCPDF (www.tcpdf.org) Product details No. 842 Revision No. 0 Date: 05 25 Litokol Lab Spa Via G. Falcone 13/1 42048 Rubiera RE Italy Tel. +39 0522 622811 [email protected] www.litokol.com Technical Specifications