Pixel® 3D-N Technical Specifications Pro Stain-Resistant Sealant. For bathrooms, shower cubicles, sanitary ware, kitchens, glass panels, window frames, doors and sealing delicate materials such as marble and natural stone. Product description Professional stain-resistant sealant with neutral curing properties for sealing permanently elastic joints between marble, granite, natural stone, tiles, porcelain stoneware, slabs and mosaics, both indoors and outdoors, on floors and walls. Formulated for application without the need for any adhesion-promoting primer, it provides a perfect seal in bathrooms, shower cubicles, sanitary facilities, kitchens, glazed areas, window frames and doors. Suitable for sealing expansion joints, even under severe operating conditions such as in swimming pools and on façades. Free from solvents and isocyanates. Not hazardous to applicators according to the CLP Regulation Ready to use, reusable, minimises waste and material wastage. Very low emissions of volatile organic compounds (VOCs) INT-EXT CC EN 15651-1 G CC EN 15651-2 S EN 15651-3 EC1 Plus Gev Emicode A+ Indoor air emissions Technical Specifications

Marble and natural stone Porcelain stoneware Ceramic tiles Resin- or cement-based composites Terracotta – Klinker Ceramic and glass mosaics Sheets Sealant Floors – walls Interior – exterior Radiant heating systems Indoor wet areas – bathrooms and showers Ponds, swimming pools and fountains Terraces and balconies SPA and Hammam Facades Residential, public, commercial and street furniture Apply the product at temperatures between +5°C and +35°C In hot weather, store the product packs in a cool place away from direct sunlight before use Curing times are proportional to the thickness of the silicone...

Total permissible deformation 25% ApplicationSpecifications Polymerisation Specific gravity Film formation time Full cure in 24 hours Permissible application temperatures Recommended application temperatures Operating temperature Ready for foot traffic Set-up time Neutral cross-linking Thixotropic paste 1.02 kg/dm3 About 25 minutes 2-3 mm From +5°C to +35°C From +15°C to +25°C From -40°C to +150°C 24 hours at T = +23°C 5 days at T = +23°C Remove the top of the threaded section of the cartridge, screw on the plastic nozzle and cut it at an angle determined by the desired diameter and profile....

Powered by TCPDF (www.tcpdf.org) Safety Information For the safe use of our products, please refer to the latest version of the Safety Data Sheet, available at www.litokol.com PRODUCT FOR PROFESSIONAL USE Legal notices The information and specifications set out in this technical data sheet are based on our best knowledge. However, as we are unable to directly influence site conditions or the execution of the works, these are general guidelines which do not in any way bind our Company. We therefore recommend carrying out a preliminary test to verify the product’s suitability for the intended use;...