Ottoseal S70 Technical Specifications SINGLE-COMPONENT, NEUTRAL-CURING SILICONE SEALANT. FOR INTERIORS, EXTERIORS AND SWIMMING POOLS. IDEAL FOR USE ON FACADES. SUITABLE FOR MARBLE, GRANITE AND NATURAL STONE. PRODUCT WITH EXTREMELY LOW VOLATILE ORGANIC COMPOUND (VOC) EMISSIONS. Product description Single-component silicone- and oxime-based sealant, neutral-curing, free from methylethyl ketone oxime. Guaranteed – leaves absolutely no marks on the edges of joints in natural stone. Does not cause corrosion (rust) on unprotected metal surfaces. ADVANTAGES / FEATURES • Product with ultra-low emissions of volatile organic compounds (VOCs). Complies with Class EC1PLUS according to the EMICODE protocol and with Class A+ (Indoor Air Emissions – French Regulations) • Compatible with natural stone in accordance with ISO 16938-1 • Also available in ‘textured’ colours with a grainy, stone-like surface • Also available in ‘matt’ colours • Flexible • Waterproof • Ready to use • Product subject to no restrictions on transport by road, sea, air or rail • Excellent resistance to weathering, ageing and UV rays • Resistant to mould and bacteria • Surface can be smoothed to an exceptionally high finish • Non-corrosive

Sealing of marble and all natural stones, such as sandstone, quartzite, granite, gneiss, porphyry, etc., both indoors and outdoors. Insulation against stress cracks in floors, walls and façades. Sealing of swimming pools made of marble or natural stone, including submerged joints. Sealing of painted and enamelled glass. For bonding the edges of mirrors in contact with natural stone. Tension-compensating bonding of natural stone to metal, e.g. stair treads on a metal structure. The surfaces to be sealed or bonded must be perfectly clean, dry and free from dust, grease, oils and old paint. Cleaning...

• Before applying the product, ensure that the building materials with which it will come into contact are compatible with the product itself and with each other, and that they cannot damage or alter the product's characteristics • Where building materials are to be further processed at the point where the product has been applied, the user must ensure that the relevant solid or volatile components do not compromise or alter the product's characteristics • If necessary, the user must contact the manufacturer of the building materials used • During curing, minimal quantities of an oxime compound...

Ceramics, vitrified Ceramics, unglazed Klinker Synthetic stone Plastic profiles (rigid PVC) Melamine resin panels Brass Solid surface material Natural stone (marble, granite, etc.) Natural stone (marble, granite, etc.) in Aerated concrete Plaster Rigid PVC Flexible PVC film Tinned sheet metal Zinc, galvanised iron + GOOD ADHESION WITHOUT PRIMER Linear metres of joint that can be created with a 310 ml cartridge Width Width Width Width Width Neutral cross-linking Thixotropic paste 1.00 kg/dm3 From +5°C to +35°C From +15°C to +25°C From -40°C to +180°C 24 hours at T = +23°C 5 days at T = +23°C Specific...

PERFORMANCE Elongation at break 600 % Total permissible deformation 25% Dispensing rate 130-160 g/min NOTES Data recorded at a temperature of +23 °C, 50% RH and in the absence ofventilation. These may vary depending on specific site conditions. Product details No. 811 Revision No. 0 Date: March 2021 Litokol Lab Spa Via G. Falcone 13/1 42048 Rubiera RE Italy Tel. +39 0522 622811 [email protected] www.litokol.com 5 - Ottoseal S70 Technical Specifications