Ottoseal S100 Technical Specifications SINGLE-COMPONENT, ACETIC-CROSS-LINKING SILICONE SEALANT. FOR INDOOR AND OUTDOOR USE. EXCELLENT RESISTANCE TO WEATHERING, AGEING AND UV RAYS. PRODUCT WITH EXTREMELY LOW VOLATILE ORGANIC COMPOUND (VOC) EMISSIONS. Product description Single-component silicone- and acetate-based sealant. ADVANTAGES / FEATURES • Product with ultra-low emissions of volatile organic compounds (VOCs). Complies with Class EC1PLUS according to the EMICODE protocol and with Class A+ (Indoor Air Emissions – French Regulations) • Ready to use • Flexible • Waterproof • Excellent resistance to weathering, ageing and UV rays • Resistant to mould and bacteria • Surface can be smoothed to an exceptionally high finish • Product subject to no restrictions on transport by road, sea, air or rail • Excellent adhesion without primer on all typical industrial and construction materials Sealing expansion joints on floors and walls.

Expansion joints and transition joints in healthcare environments. Bonding and sealing of glass component manifolds. Sealing of profiled glass. PREPARATION OF The surfaces to be sealed or bonded must be perfectly clean, dry and free SUBSTRATES from dust, grease, oils and old paint. oUDolRAlLo Cleaning non-porous surfaces: clean with OTTO Cleaner T (drying time approx. 1 minute) and a clean, lint-free cloth. Cleaning porous surfaces: clean the surfaces mechanically, e.g. with a steel brush or a polishing disc, to remove loose particles. APPLICATION Remove the top of the threaded section of the...

• Otherwise, despite the fungicide content in the sealant, mould will soon start to affect the joint again • Do not use the product for applications not specified in this technical data sheet • If in doubt, please contact the Litokol S.p.A. Technical Support Department Please refer to the product safety data sheet, available on request. PRODUCT FOR PROFESSIONAL USE Linear metres of joint that can be achieved with a 300 ml cartridge Width Width Width Width PRIMER TABLE Substrate Primer Acrylic glass/PMMA (Plexiglas, etc.) - Acrylic sanitaryware (e.g. baths) + / 1101 Powder-coated aluminium (with...

Tinned sheet metal Zinc, galvanised iron + GOOD ADHESION WITHOUT PRIMER Acetic cross-linking Thixotropic paste 1.00 kg/dm3 About 20 minutes 2-3 mm From +5°C to +35°C From +15°C to +25°C From -40°C to +180°C 24 hours at T = +23°C 5 days at T = +23°C APPLICATION DATA Polymerisation Consistency of the mix Specific gravity Film formation time Full cure in 24 hours Permissible application temperatures Recommended application temperatures Operating temperature Ready for foot traffic Set-up time Customs classification Coloured thick paste See colour chart 32149000 Shelf life 18 months in the original...

Stylegrout Tech - Stylegrout 0-8 - Stylegrout 3-20 COLD TONES WARM TONES Class COLDCOLLECTION Metallic Collection ©©©©© WARMCOLLECTION 200 Avorio S100C51 Shining Gold S100C19 Bronze SI 00 Cl 5 300 Azzurro Pastello 310 Azzurro Polvere • 320 Azzurro Caraibi • 330 Blu Avio • 410 Verde Smeraldo • 420 Verde Prato • 500 Rosa Cipria 530 Viola Ametista • 550 Rosso Oriente NOTES Data recorded at a temperature of +23 °C, 50% RH and in the absence of ventilation. These may vary depending on specific site conditions. Product details No. 812 Revision No. 0 Date: March 2021 Litokol Litokol Lab Spa Via G. Falcone...