Product description Water-resistant universal adhesive. Transparent bonding. ADVANTAGES/ • Product with ultra-low emissions of volatile organic compounds (VOCs). CEATMDEC Complies with Class EC1PLUS according to the EMICODE protocol and FEAIURES with Class A+ (Indoor Air Emissions - French Regulations) • Virtually invisible bonding • Compensates for dynamic stresses • Product subject to no restrictions on transport by road, sea, air or rail • Apply using the wet-on-wet method or by immersion • No hazard symbols on the label PACKAGING 310 ml cartridge - Boxes of 20 1 - Ottocoll M501 Technical Specifications

For stress-compensating bonding and the installation of various materials, such as wood, wood-based materials, glass, metals (e.g. aluminium, stainless steel, anodised aluminium, brass, copper), plastics (e.g. rigid PVC, flexible PVC, glass-fibre-reinforced plastic, etc.), mineral substrates (e.g. bricks, tiles, ceramics), fire-resistant panels (plasterboard, etc.) Motor vehicle and bodywork manufacturing, railway carriages and containers, metals and equipment, shipbuilding Bonding of stone, natural stone and ceramics Tension-compensating bonding of mirrors to ceramic, glass, plastic, stainless...

• Where building materials are to be further processed at the point where the product has been applied, the user must ensure that the relevant solid or volatile components do not compromise or alter the product's characteristics • If necessary, the user must contact the manufacturer of the building materials used • Where the product comes into contact with non-ferrous materials, discolouration of the adhesive cannot be ruled out (particularly on surface bonds) • Not suitable for sealing or bonding copper exposed to UV rays and high temperatures • Do not use the product for applications not specified...

IDENTIFICATIONDATA Polymerisation Specific gravity Film formation time Full cure in 24 hours Permissible application temperatures Recommended application temperatures Operating temperature Ready for foot traffic Set-up time Moisture-curing Thixotropic paste 1.0 kg/dm3 About 40 minutes 3 mm From +5°C to +40°C From +15°C to +25°C From -40°C to +90°C 24 hours at T = +23°C 5 days at T = +23°C APPLICATION DATA Appearance Thick paste Colours Crystalline Shelf life 12 months in the original packaging, away from heat sources and direct light. Keep away from frost. PERFORMANCE Full curing 3 mm NOTES Data...