*myarchiexpo

Catalogs
LITOKOL
OTTO Primer 1218

OTTO Primer 1218

Product catalog summary

Product Description: OTTO Primer 1218 is a silicone primer designed to enhance the adhesion of sealants and adhesives in conditions of constant moisture. It is suitable for both indoor and outdoor applications on floors and walls, even under severe conditions.

Advantages/Features: The primer is ready to use and improves adhesion on absorbent and mineral-based materials. It has a drying time of over 60 minutes and is packaged in 100 ml aluminium bottles, available in boxes of 15.

Areas of Application: It is used with various Ottoseal products, such as S27 for food and drinking water applications on unglazed ceramics, S70 and S140 for natural stone, M350 for concrete and plaster, and S18 for swimming pool silicone on mineral-based materials and ceramics.

Preparation of Substrates: Surfaces must be clean, dry, and free from contaminants. Non-porous surfaces should be cleaned with OTTO Cleaner T, while porous surfaces require mechanical cleaning.

Application: The primer should be applied with a brush in a thin, even layer. Care should be taken to avoid staining adjacent natural stone surfaces. A minimum drying time of 60 minutes is required, and a test application is recommended due to varying factors affecting application.

Warnings: The product should be applied at temperatures between +5°C and +35°C. It contains toluene and is subject to specific regulations. It should not be used for unspecified applications, and preliminary tests are recommended for other substrates.

Safety Information: Refer to the product safety data sheet for detailed safety instructions.

Identification Data: The primer is a transparent liquid with a specific gravity of 0.9 kg/dm³ and a shelf life of 12 months. It should be stored in a dry place away from frost.

Application Data: The product is ready-to-use, applied with a roller or brush, and has an operating temperature range from -5°C to +80°C. Equipment should be cleaned with water when the product is fresh.

Notes: Data is recorded at +23°C and 50% RH. Conditions may vary based on specific site conditions.

Catalog excerpts

SILICONE PRIMER FOR CONDITIONS OF CONSTANT MOISTURE. Product description Primer to improve the adhesion of sealants and adhesives in conditions of constant moisture. ADVANTAGES/ FEATURES • Primer to improve adhesion on absorbent and mineral-based materials subject to constant moisture stress • Suitable for indoor and outdoor applications on floors and walls, even under severe operating conditions • Drying time > 60 minutes PACKAGING 100 ml aluminium bottle - boxes of 15 AREAS OF For Ottoseal S27, a silicone suitable for food and drinking water, on APPIICATION unglazed ceramic substrates. APPLICAM°N For Ottoseal S70 and S140 silicones for natural stone. Improved adhesion of Ottoseal M350 to concrete and plaster. For Ottoseal S18 swimming pool silicone on mineral-based materials (e.g. concrete, mortar, joint mortar) and ceramics. 1 - OTTO Primer 1218 Technical Specifications

Open the catalog to page 1

PREPARATION OF The surfaces to be sealed or bonded must be perfectly clean, dry and free SUBSTRATES from dust, grease, oils and old paint. oUDolRAlEo Cleaning non-porous surfaces: clean with OTTO Cleaner T (drying time approx. 1 minute) and a clean, lint-free cloth. Cleaning porous surfaces: clean the surfaces mechanically, e.g. with a steel brush or a polishing disc, to remove loose particles. APPLICATION Apply the primer to the sides of the joint using a suitable brush. Apply evenly and in a thin layer; any excess material forms a film that may compromise adhesion. Apply the primer with the...

Open the catalog to page 2

Powered by TCPDF (www.tcpdf.org) Application Permissible application temperatures Waiting time before applying sealants Operating temperature Cleaning of equipment Coverage Roller or brush From +5°C to +35°C > 15 minutes From -5°C to +80°C With water when the product is fresh. Mechanically once the product has hardened. 80–200 g/m2 Data recorded at a temperature of +23 °C, 50% RH and in the absence of ventilation. These may vary depending on specific site conditions. Product details No. 833 Revision No. 0 Date: March 2021 Litokol Lab Spa Via G. Falcone 13/1 42048 Rubiera RE Italy Tel. +39 0522...

Open the catalog to page 3

OTTO Primer 1218

OTTO Primer 1218

Catalog excerpts

All LITOKOL catalogs and technical brochures