SILICONE PRIMER FOR PLASTIC MATERIALS Product description Primer to improve the adhesion of sealants and adhesives to plastic ADVANTAGES / • Ready • Primer to improve adhesion on many plastics FEAIURES • Suitable for indoor and outdoor applications on floors and walls, even under severe operating conditions • No drying time is required for smooth, non-absorbent materials PACKAGING 100 ml aluminium bottle - boxes of 15 AREAS OF Plastic substrates PREPARATION OF The surfaces to be bonded and sealed must be clean, and any foreign SUBSTRATES substances that could compromise adhesion - such as release agents, oUDolRAlLo preservatives, grease, oils, dust, water, or residues of old adhesives or sealants - must be removed. Cleaning non-porous surfaces: clean with OTTO Cleaner T (drying time 1 - OTTO Primer 1217 Technical Specifications

approx. 1 minute) and a clean, lint-free cloth. Cleaning porous surfaces: clean the surfaces mechanically, e.g. with a steel brush or a polishing disc, to remove loose particles. APPLICATION Apply the primer evenly using a clean cloth or felt pad, or a suitable brush. Apply evenly and in a thin layer; any excess material forms a film that may compromise adhesion. Apply the primer with the utmost care and avoid wetting the natural stone surfaces adjacent to the sides of the joints to prevent staining. Smooth substrates do not require long drying times. For textured or absorbent surfaces, allow...

Powered by TCPDF (www.tcpdf.org) Waiting time before applying sealants Operating temperature Cleaning of equipment Coverage 0–180 minutes From -5°C to +80°C With water when the product is fresh. Mechanically once the product has hardened. 10–20 g/m2 Data recorded at a temperature of +23 °C, 50% RH and in the absence of ventilation. These may vary depending on specific site conditions. Product details No. 832 Revision No. 0 Date: March 2021 Litokol Lab Spa Via G. Falcone 13/1 42048 Rubiera RE Italy Tel. +39 0522 622811 [email protected] www.litokol.com Technical Specificat