OTTO Primer 1217 SILICONE PRIMER FOR PLASTIC MATERIALS Primer to improve the bonding of grouts and adhesives on plastic materials. ADVANTAGES / FEATURES 0.11 qts. (100 ml) metal bottles (boxes with 15 pcs) FIELDS OF APPLICATION PREPARATION OF SUBSTRATES Plastic substrates Apply the primer evenly with a clean cloth/felt pad or suitable brush. Apply evenly and thinly; the excess material forms a film that could compromise bonding. Apply the primer very carefully and avoid wetting the natural stone surface next to the sides of the joint to prevent the formation of stains. Smooth substrates do not require long drying times. For structured or absorbent surfaces, allow for at least 15 minutes drying time. The waiting time between the application of the primer and the subsequent grouting can add up to several hours; avoid dust deposits. given the large number of factors which influence the treatment and the application of the product, the user should always perform a test treatment and application. • Spread the product at temperatures between 40°F and 95°F • In warm climates, keep the packaged product in a cool and dry place away from the sun before use • The primer has been created for adhesives and grouts to guarantee excellent adhesion in combination with the latter • Do not use the primer and cleanprimer beyond the joint edges and the bonding surfaces to avoid making them dirty or changing the appearance • For other groups of products, substrates or coverings which have not yet been mentioned, we suggest performing preliminary tests • The interaction and compatibility with the adhesives and grouts has been tested and approved by our technical help service • Do not use the product for applications not stated in this technical sheet • If in doubt, contact the Litokol S.p.A Technical Help Service. Ready to use Primer to improve bonding on many plastic materials Suitable for interior and exterior floor and wall applications, even in severe operating conditions No drying time is required in the case of smooth, non-absorbent materials The surfaces to be bonded and grouted must be clean and any foreign substance must be eliminated which could affect bonding, such as loose parts, preservatives, grease, oil, dust, water, traces of old adhesives or grouts. Cleaning non-porous surfaces: clean with OTTO Cleaner T (drying time about 1 minute) and a dry fiber-free cloth. Cleaning porous surfaces: clean the surfaces mechanically, e..g with a steel brush or a smoothing disc to remove loose particles. Elastic grou

Powered by TCPDF (www.tcpdf.org) SAFETY INFORMATION Consult the product safety data sheet, available on request. PRODUCT FOR PROFESSIONAL USE IDENTIFICATION DATA Appearance Specific gravity Drying time Customs code Shelf life Clear liquid 6.6lb/gal (0.8 kg/dm3) Immediate 32089019 12 months in original packaging in a dry place. Protect against frost. APPLICATION DATA Mix ratio Application Acceptable application temperatures Waiting time for application of grouts Serviceability Temperatures How to clean equipment Ready-to-use product without the need for any preparation. Roller or brush From +41°F...