*myarchiexpo

Catalogs
LITOKOL
OTTO Cleanprimer 1101

OTTO Cleanprimer 1101

Product catalog summary

Product Description: OTTO Cleanprimer 1101 is designed to clean surfaces to be sealed and enhance adhesion. It is ready to use and suitable for both indoor and outdoor applications on metallic materials and various plastics, including PVC. The product is toluene-free and does not require drying.

Advantages/Features: The primer is ideal for severe operating conditions, does not require drying, and is packaged in 100 ml aluminium bottles, available in boxes of 15.

Areas of Application: It is particularly effective on coated and uncoated metallic materials and various plastics.

Preparation of Substrates: Surfaces must be clean and free from substances that could affect adhesion. Non-porous surfaces should be cleaned with OTTO Cleaner T, while porous surfaces require mechanical cleaning.

Application: Apply with a clean cloth or suitable paper towel in a thin, even layer. No drying time is needed, but avoid dust build-up. A test application is recommended due to varying factors affecting product performance.

Warnings: Apply between +5°C and +35°C. Store in a cool place away from sunlight in hot climates. Ensure compatibility with adhesives and sealants, and avoid applying beyond joint edges. Preliminary tests are advised for unlisted substrates or coatings.

Safety Information: Refer to the product safety data sheet for detailed safety instructions.

Identification Data: The product is a transparent liquid with a specific gravity of 0.7 kg/dm³ and immediate drying time. It has a shelf life of 12 months when stored properly.

Application Data: The product is ready to use with no preparation needed. It can be applied at temperatures from +5°C to +35°C, with an operating temperature range from -5°C to +80°C. Equipment can be cleaned with water when fresh or mechanically once hardened. Coverage is 30–50 g/m².

Notes: Data is recorded at +23°C and 50% RH without ventilation and may vary based on site conditions.

Catalog excerpts

Product description Product for cleaning the surface to be sealed and to improve adhesion. • Ideal for cleaning and improving adhesion on coated and uncoated rcMlUnES metallic materials and on various plastics (e.g. PVC) • Suitable for indoor and outdoor applications on floors and walls, even under severe operating conditions • Does not require drying PACKAGING 100 ml aluminium bottle - boxes of 15 Ideal for cleaning and improving adhesion on coated and uncoated metallic materials and on various plastics (e.g. PVC). PREPARATION OF The surfaces to be bonded and sealed must be clean, and any foreign SUBSTRATES substances that could compromise adhesion - such as release agents, oUDolRAlLo preservatives, grease, oils, dust, water, or residues of old adhesives or 1 - OTTO Cleanprimer 1101 Technical Specifications

Open the catalog to page 1

sealants - must be removed. Cleaning non-porous surfaces: clean with OTTO Cleaner T (drying time approx. 1 minute) and a clean, lint-free cloth. Cleaning porous surfaces: clean the surfaces mechanically, e.g. with a steel brush or a polishing disc, to remove loose particles. APPLICATION Apply the primer with a clean cloth/felt pad or suitable paper towel; do not apply with a brush. Apply evenly and in a thin layer; any excess material forms a film that may compromise adhesion. No drying time required. The waiting time between applying the primer and the subsequent sealing may be several hours;...

Open the catalog to page 2

Operating temperature From -5°C to +80°C Cleaning of equipment With water when the product is fresh. Mechanically once the product has hardened. Coverage 30-50 g/m2 Product details No. 841 Revision No. 0 Date: March 2021 Litokol Lab Spa Via G. Falcone 13/1 42048 Rubiera RE Italy Tel. +39 0522 622811 [email protected] www.litokol.com 3 - OTTO Cleanprimer 1101 Technical Specifications

Open the catalog to page 3

OTTO Cleanprimer 1101

OTTO Cleanprimer 1101

Catalog excerpts

All LITOKOL catalogs and technical brochures