Multifondo EVO TWO-COMPONENT EPOXY SKIM COAT SUITABLE FOR OVERLAYING AND UNDERFLOOR HEATING. ZHERORISK TECHNOLOGY OFFERS VERY LOW VOLATILE ORGANIC COMPOUND EMISSION RATE. Multifondo EVO is a white epoxy structural primer ideal for smoothing and leveling substrates before applying the Wall and Floor” SpazioContinuo® and Starlike® Decor decorative systems. It has high elasticity and excellent adhesion on absorbent and non-absorbent substrates. ADVANTAGES / FEATURES • Product exhibiths Very low volatile organic compound (VOC). Complies with the most stringent Global Air Quality Regulations. • Suitable for installation on heating screeds • Suitable for overlaying on existing flooring • Extended pot life of mix (about 60 minutes), which facilitates application on large surfaces • No restrictions for transport over road, sea, air and rail • White color, which enhances the coloring of the Spaziocontinuo® textures and of Starlike® Decor without altering the original shade • Product with excellent fluidity and easy to spread • Easy to sand • Selected granulometry allowing excellent anchorage of the decorative leveling layer made with Starlike® Decor and Spaziocontinuo® • The high opaque effect makes it possible to even the surface of the substrate, covering any slight unevenness and color differences • Excellent adhesion on absorbent and non-absorbent substrates • Ideal for the sealing of static joints or cracks • Suitable for repairing any cracks or fissures in cement screeds, by sprinkling 1/50" - 1/24" (0.4-1 mm) grain size quartz sand on the surface when still wet before applying adhesives, self-levelers or skim coats and waterproofing membranes. Intended uses Interiors and exteriors Floors and walls Underfloor heating Overlaying on existing floors and coverings in ceramic, porcelain stoneware, mosaics, agglomerates, natural stones and parquet Residential, public, commercial building Indoor wet areas (bathrooms, shower enclosures) Covering of furniture and structures in wood, metal or plastic Sealing of static joints and cracks on cement screeds Suitable substrates Cement screeds Self-levelers Skim coats Lightweight panels (such as WEDI-SCHLÜTER). Decoupling membrane Underfloor heating systems Concrete Normal and waterproof gypsum Fiber cement slabs (such as Aquapanel) Gypsum and anhydrite Existing floors and coverings in ceramic, porcelain stoneware, mosaics, agglomerates, natural stones and wood Rough cement plaster Wood panels Metal Smoothed concrete Fi

RESIN DECORATIVE SYSTEM PLANNING The only way to guarantee the long-lasting performance of resin decorative systems is to properly plan the process. It is therefore advisable to consult the national regulations in force in each country, for example standard UNI 10966 for Italy, which defines the planning and installation criteria for resinous systems for interior and exterior horizontal and vertical surfaces. Some of the general precautions that need to be followed are listed below as an example. ANALYSIS OF SUBSTRATE Vapor barrier/retarder Make sure the vapor barrier or retarder has been properly...

• Excessively porous and absorbent or powdery substrates must be treated with the consolidating primer Fissativo Universale EVO • Floor and wall coverings in ceramic, porcelain stoneware, mosaics, agglomerates and natural stone must be suitably sanded or degreased with specific detergents, such as Litoscrub EVO • In the case of anhydrite screeds, check for the presence of a suitable vapor barrier in order to prevent rising damp. Use a carbide method hygrometer to check that the residual humidity is less than 0.5%. The surface must be sanded and treated with Fissativo Universale EVO • Any cracks,...

subsequent application of Spaziocontinuo® or Starlike® Decor. Underfloor heating After at least 4 days from installation of the screed developed with Litocem or Litocem Pronto, the heating system can be used with a variable supply water temperature between +20°C (68°F) and +25°C (77°F), kept constant for at least 3 days. Then set the maximum design temperature and hold it for another 4 days. At the end of this cycle, bring the screed back to ambient temperature and install the covering (see standard EN 1264-4). Steps Insert the NAF 150002 reinforcing profile by embedding it in the first coat...

SAFETY INFORMATION Consult the product safety data sheet, available on request. PRODUCT FOR PROFESSIONAL USE

Powered by TCPDF (www.tcpdf.org) IDENTIFICATION DATA Appearance Appearance Customs code Shelf life Component A: white paste Component B: thick amber liquid 35069190 24 months in original packaging in a dry place. APPLICATION DATA Mix ratio Mix ratio Appearance of mix Specific gravity of mix Pot life Application Acceptable application temperatures Permissible relative ambient humidity Waiting time between coats Waiting time for overlaying Serviceability Temperatures How to clean equipment Component A: 93.4 parts by weight Component B: 6.6 parts by weight Thixotropic paste 1.7 kg/dm3 (3.75lb/in3)...