Litotex Technical Specifications Anti-crack decoupling membrane in rolls for the installation of floor and wall coverings made of ceramic tiles, porcelain stoneware and natural stone, including removable ones Product description Litotex is an anti-fracture decoupling membrane supplied in rolls for the installation of floor and wall coverings in ceramic tiles, porcelain stoneware and natural stone, including removable, anti-fracture types. It consists of two outer layers of non-woven fabric, which ensure maximum adhesion, laminated and reinforced internally with a fibreglass mesh to absorb the movements and stresses generated between the substrate and the covering. Designed for the installation of floors in ceramic tiles, porcelain stoneware and natural stone – including removable tiles – it is quick and easy to apply on site and ensures maximum installation safety. Thanks to the exclusive microstructure of the surfaces, up to 50 per cent less adhesive is required for the subsequent installation of the cladding compared to traditional embossed membranes, and it maintains its performance even in very low temperatures. It is ideal for laying new floor coverings on cracked and problematic substrates, as the product can be applied over existing flooring consisting of ceramic tiles or natural stone, thereby avoiding extensive and costly demolition and disposal work. EC1 Plus Gev Emicode A+ Indoor air emissions Technical Specification

Screeds Self-levelling compounds Levelling Compounds Existing tiles Plaster Concrete and reinforced concrete (waterproofing only) Plaster and anhydrite Fibre-cement sheets Interior Floors – walls Overlay Terraces and balconies SPA and Hammam Indoor wet areas (bathrooms, showers) Industrial flooring Facades Residential, public and commercial construction Do not use outdoors In applications exposed to foot traffic and abrasion, cover with suitable protection systems against direct abrasion until the tiling is laid Do not apply to wet surfaces, damp substrates (> 5% moisture content) or those subject...

Lateral breaking load Adhesion strength Shear adhesion Longitudinal elongation at break Lateral elongation at break (+ = resistant / 0 = weakened / - = not resistant) In-house method In-house method In-house method In-house method In-house method In-house method In-house method In-house method Chemical resistance Active ingredient 3% hydrochloric acid + Salt water (20 g/l seawater) + Preparation of ln accordance with standard UNI 11493-1, substrates and coatings based btt on concrete, cement and plaster must be adequately cured and must not substrates show signs of excessive moisture emission,...

Flooring installation The installation of ceramic tiles, natural stone or mosaics shall be carried out using high-performance gels based on Litokol technology, which guarantee complete force transfer, consistent system performance and total safety. To ensure perfect adhesion of the adhesive gel to the HydroProof Anti-Fracture membrane, apply a thin, even coat of the mixture using the smooth side of the trowel and, immediately afterwards, apply the desired thickness using the notched side. In accordance with the UNI 11493-1 standard, use the double-coating technique, applying the gel to the back...

Powered by TCPDF (www.tcpdf.org) Specification item Anti-fracture decoupling where subsequent tiling is planned must be carried out using an anti-fracture decoupling membrane in rolls for the installation of floor and wall coverings in ceramic tiles, porcelain stoneware and natural stone, including removable types such as Litotex by Litokol Lab SpA. Product details No. 618 Revision No. 1 Date: 04 25 Litokol Lab Spa Via G. Falcone 13/1 42048 Rubiera RE Italy Tel. +39 0522 622811 [email protected] www.litokol.com Technical Specifications