Litostone Protector WATER- AND OIL-REPELLENT STAIN-PROOF IMPREGNATING AGENT FOR MARBLE AND GRANITE Litostone Protector is a solvent-based, stain-proof impregnating agent for the treatment of marble and granite. It offers stand-out and long-lasting protection without altering the natural color of materials, preventing staining agents such as red wine, oil, ink, coffee etc. from penetrating the pores of the material, thus allowing spillages to be promptly removed. It can also be used as a pre-treatment before grouting. The product is suitable for use on all types of natural stones with medium-low absorbency such as marble and granite. 1.05 qts. (1 l) metal bottles (boxes with 12 pcs) Suitable for the stain-proof treatment of marble and granite, natural stones, recomposed marble or granite, natural materials with medium-low absorbency. Shake well before use. Apply the pure, undiluted product directly onto the relative surface, spreading it evenly using a brush, roller, airless sprayer or fleece. After application, wait approximately 10 minutes before removing any excess product left on the surface. This removal process must be carried out meticulously to restore dryness to the surface and eliminate any residue. Use absorbent cloths and cotton materials for the removal process. Wait at least 4-6 hours before opening the treated area to traffic. • Spread the product at temperatures between 40°F and 95°F • Spread the product only on perfectly clean and dry surfaces • Before use, protect doors, windows, rubber gaskets, furniture, taps and fittings, metal or PVC profiles and all surfaces that may be damaged by direct contact with the detergents • Do not use the product on wet or heated surfaces • In the case of accidental leaks, soak up the product using an absorbent material (paper, sawdust, vermiculite, etc.) and dispose of it in a suitable container • If used as a pre-treatment, wait at least 24 hours after application before proceeding to grout • It is important to apply the recommended quantities and carefully remove any excess product within the indicated time frames to prevent greasiness. Always perform a spot test first to assess the result • Do not use the product for applications not stated in this technical sheet • If in doubt, contact the Litokol S.p.A Technical Help Service. Suitable for interior and exterior applications. Does not alter the color of the surfaces on which it is applied Resistant to UV rays and weathering High penetrating capacity Does not alter the breathability of the surfaces on which it is applied

Powered by TCPDF (www.tcpdf.org) SAFETY INFORMATION Consult the product safety data sheet, available on request. PRODUCT FOR PROFESSIONAL USE IDENTIFICATION DATA Appearance Color Odor Customs code Shelf life Clear liquid Colorless Organic solvent 38249097 36 months in original packaging away from sources of heat and direct sunlight. APPLICATION DATA Treatment time Flammable Flash point (ASTM D 56) Specific gravity Application Acceptable application temperatures Consumption 10 minutes YES +23°C (73.4°F) open cup 6.6lb/gal (0.8 kg/l) Brush, roller, airless sprayer or fleece From +41°F to +104°F...