Litostain Cleaner STAIN REMOVER FOR COLORED STAINS ON ALL MATERIALS Litostain Cleaner is a water-based gel stain remover for the removal of colored stains. This product can be used on all materials. 0.53 qts. (0.5 l) bottles (boxes with 12 pcs) Litostain Cleaner is a versatile product that can be used on all ceramic and natural stone surfaces. It easily extracts colored staining agents such as: coffee, red wine, fruit, fruit juices, mold, algae, ink etc. Its viscous formula ensures greater contact time on the stain and also allows vertical application. Shake well before use. The pure product is applied directly on the stain and left to act for 10 to 20 minutes in the case of fresh stains, or even overnight for more stubborn stains. Then remove the product using a clean rag and rinse. If improvement is noticed after the first application, repeat the process using the same methods. • Spread the product at temperatures between 40°F and 95°F • Before use, protect doors, windows, rubber gaskets, furniture, taps and fittings, metal or PVC profiles and all surfaces that may be damaged by direct contact with the detergents • Do not use the product on wet or heated surfaces • Do not use the product in combination with other chemical products • Do not use to remove oil stains • In the case of highly absorbent surfaces, dampen slightly with water before applying the product • Do not use the product for applications not stated in this technical sheet • If in doubt, contact the Litokol S.p.A Technical Help Service. SAFETY INFORMATION Consult the product safety data sheet, available on request. PRODUCT FOR PROFESSIONAL USE Water-based product High stain removal power Does not alter the treated surfaces Versatile and usable on all surfaces

Powered by TCPDF (www.tcpdf.org) IDENTIFICATION DATA Appearance Color Odor Customs code Shelf life Clear gel Colorless Hypochlorite 38249097 12 months in original packaging away from sources of heat and direct sunlight. Protect against frost. APPLICATION DATA Treatment time Flammable pH Specific gravity Application Acceptable application temperatures Consumption 10 - 20 minutes up to a few hours NO 11,0 - 12,0 1.12 kg/l (2.45lb/US gal lqd) Sponge or white felt From +41°F to +104°F (+5°C to +35°C) Dependent on the size of the stain Data detection at temperature +73.4°F (+23 °C ), R.H. 50% and...