Litoflex Pro K80 HIGH-PERFORMANCE CEMENTITIOUS ADHESIVE WITH NO VERTICAL SLIP AND LONG OPEN TIME FOR THE INSTALLATION OF CERAMIC AND PORCELAIN TILES, PORCELAIN STONEWARE, MOSAICS AND NATURAL STONES ON INTERIOR AND EXTERIOR WALLS AND FLOORS. SUITABLE FOR OVERLAYING AND UNDERFLOOR HEATING. ZHERORISK TECHNOLOGY OFFERS VERY LOW VOLATILE ORGANIC COMPOUND EMISSION RATE. ADVANTAGES / FEATURES • Product exhibiths Very low volatile organic compound (VOC). Complies with the most stringent Global Air Quality Regulations. • Versatile product. Can also be used on underfloor heating and over existing ceramic and porcelain tiles • Allows the installation of ceramic, porcelain and mosaic wall coverings without the need for plastic spacers • Suitable for installation on heating screeds • Suitable for overlaying on existing flooring • Suitable for interior and exterior floor and wall applications, even in severe operating conditions • Maintains excellent pot life over time, without any bothersome thickening 44lb (20 kg) bags - 2,645.5lb (1,200 kg) standard pallet of 60 bags Intended uses Interiors and exteriors Floors and walls Underfloor heating Facades Overlaying Terraces and balconies Residential, public, commercial building For example, it can also be used to install suitable materials in the following areas: Interior floors in residential and public/commercial settings (pedestrian areas) Substrates Longest allowable tile side (in) (cm) Cement or Litocem/Litocem Pronto-based non-heating screeds up to 120 Cement or Litocem/Litocem Pronto-based heating screeds up to 90 Sulfate-based (anhydrite) non-heating screeds (1) up to 120 Sulfate-based (anhydrite) heating screeds (1) up to 90 Cast-in-place concrete (2) up to 120 Pre-cast concrete up to 30 Pre-existing tiled, mosaic, stone, agglomerate substrates (3) up to 90 Pre-existing substrates with organic adhesive residue (4) up to 90 Substrates waterproofed with Hidroflex, Aquamaster, Elastocem, Coverflex, Litoproof up to 60 Plus Substrates with separation layer or membrane up to 120 Interior floors in public/commercial and industrial settings with heavy traffic Substrates Longest allowable tile side (in) (cm) Materials Ceramic and porcelain tiles Porcelain stoneware Recomposed stone made with resin or cement Terracotta - Clinker Marble – Granite – Stone Natural stones Single fired Double fired Large-Format tiles and panels Cementitious adhesives Suitable substrates Cement screeds Self-levelers Skim coats Existing tiles Waterproofing systems Underfloor heating systems Concrete Gypsum Fiber cement slabs Gypsum and anhydrite Aerated concrete Plasters Insulating panels Lightweight panels Decoupling membrane

Cement or Litocem/Litocem Pronto-based non-heating screeds up to 90 Cast-in-place concrete (2) up to 120 Pre-cast concrete up to 60 Pre-existing tiled, mosaic, stone, agglomerate substrates (3) up to 90 Pre-existing substrates with organic adhesive residue (4) up to 90 Substrates waterproofed with Litoproof Plus up to 60 Substrates waterproofed with Hidroflex, Aquamaster, Elastocem, Coverflex, Litoproof up to 60 Extreme Substrates with separation layer or membrane up to 120 Interior walls in residential, public/commercial and industrial settings Substrates Longest allowable tile side (in) (cm)...

INSTALLATION PLANNING The only way to guarantee the long-lasting performance of ceramic and porcelain tile installations is to properly plan the process. It is therefore advisable to consult the national regulations in force in each country, for example standard UNI 11493 in Italy, which provides all necessary instructions regarding the choice of materials, correct planning, use and installation, so as to ensure all quality, performance and durability standards are safely met. Some of the general precautions that need to be followed are listed below as an example. Substrates Before installation,...

installations or floors subject to heavy traffic. In exterior installations or areas subject to high stress, the adhesive should also be applied to the back of the slabs (back-buttering method). The tiles must be laid on the adhesive when fresh, firmly pressed to ensure good contact. The product’s pot life in normal temperature and humidity conditions is approximately 8 hours. High temperatures will shorten it, low temperatures will lengthen it. The product's open time in normal temperature and humidity conditions is approximately 30 minutes. Very warm or windy climates, or particularly absorbent...

ITEM SPECIFICATION #Ceramic and porcelain floor and wall coverings will be installed using a high-performance cementitious adhesive with no vertical slip and extended open time in class C2TE according to EN 12004, such as Litoflex PRO K80 by Litokol S.p.A. Cementitious adhesives

IDENTIFICATION DATA Appearance Color Customs code Shelf life Powder White or gray 38245090 12 months in original packaging in a dry place. APPLICATION DATA Mix ratio Mix ratio Consistency of mix Mix curing time pH of mix Specific gravity of mix Bonding time Pot life Applicable thicknesses Application Acceptable application temperatures Waiting time for grouting Set to light foot traffic Ready for use Serviceability Temperatures How to clean equipment Consumption Consumption Consumption Consumption Water = 27-29% (5.7 - 6.1 qts. (5.4-5.8 l) of water per 44lb (20 kg) bag) White Water = 27-29% (5.7...

Powered by TCPDF (www.tcpdf.org) Data detection at temperature +73.4°F (+23 °C ), R.H. 50% and with no wind. May vary depending on the specific conditions of the installation site. Form n. 017 Revision n. 2 Date: January 2021 The information and provisions contained in this technical data sheet reflect our best experience. Given the impossibility of directly intervening on the conditions of the work site and execution of the works, they represent indications of a general nature, which are in no way binding on our Company. It is therefore advisable to perform a spot test to check the suitability...