Catalogs >
LITOKOL >
Litoelastic EVO the reactive adhesive zherorisk technology

Litoelastic EVO the reactive adhesive zherorisk technology
1 / 17Pages

Add to favorites

Catalog excerpts

Litoelastic EVO the reactive adhesive zherorisk technology - 1

The reac tive adhe sive with Zher orisk ® tech nolo gy

Open the catalog to page 1

Litoelastic EVO the reactive adhesive zherorisk technology - 2

Technical specifications

Open the catalog to page 2

Litoelastic EVO the reactive adhesive zherorisk technology - 3

Zherorisk® is a research initiative carried out by Litokol’s R&D division, with the participation of the University of Modena and Reggio Emilia and external research institutes, on raw materials and ways of combining them, aimed at developing an innovative generation of environmentally-friendly building products with “zero risks”.

Open the catalog to page 3

Litoelastic EVO the reactive adhesive zherorisk technology - 4

The aim of Zherorisk® products is to guarantee the safety of people through three aspects: safeguarding the health of professional operators, the air quality in homes and all environments, and the transportation of goods. The Zherorisk® research initiative results in the creation of new families of innovative products with identical environmentally-friendly features. CERTIFICATIONS The challenge presented by the Zherorisk® research initiative was to drastically reduce the emission of volatile organic compounds (VOC), the main cause of indoor pollution, without altering the chemical and...

Open the catalog to page 4

Litoelastic EVO the reactive adhesive zherorisk technology - 5

Litoelastic EV i ■ngpi MmdhO WimV Litoelastic EVO is a white, two-part, flexible reactive adhesive with a high level of performance and zero vertical slip, used for laying all types of ceramic tiles, mosaics, natural stones and composite floors and walls, both indoors and outdoors. Product with ultra-low volatile organic chemical (VOC) emissions. Litoelastic EVO is free from water and solvents and has elevated resistance to water. Part A consists of synthetic resins, inert fine-grain aggregates and specific organic additives. Part B consists of an innovative organic catalyst. Once mixed...

Open the catalog to page 5

Litoelastic EVO the reactive adhesive zherorisk technology - 6

Advantag es • Reactive adhesive formulated with special raw materials that give the product exceptional ease of application, which is unique in its kind. • Suitable for indoor and outdoor floor or wall applications, even in harsh conditions. • Suitable for laying and simultaneous waterproofing of ceramic tiles or mosaics in showers or damp interior environments. • Product with ultra-low emission of volatile organic compounds. Conforms to EC1 PLUS classes according to the EMICODE and A+ "Émissions dans l'air interiéur"protocols according to French regulations. • Free from restrictions on...

Open the catalog to page 6

Litoelastic EVO the reactive adhesive zherorisk technology - 7

Suitable substrates Suitable for applications subject to heavy-duty operat ing conditions, such as swimming pools, hammams, whirlpools, heavy-traffic floors, and tiles exposed to extreme temperature fluctuati

Open the catalog to page 7

Litoelastic EVO the reactive adhesive zherorisk technology - 8

Universal adhesive Natural stones Composite stones Glass mosaics Ceramic mosaics PVC – Linoleum Metal surfaces Gres porcelain Glass Wood surfaces Glass mosaics and in addition: Ceramic tiles Large thin slabs including reinforced back, clinker, ceramic mosaics, composite stones including moisture-sensitive ones, e.g. marble, slate and sandstone, resin agglomerates, thin, flexible stone slabs with polyester and fibreglass reinforcement

Open the catalog to page 8

Litoelastic EVO the reactive adhesive zherorisk technology - 9

Incollaggio di piastrelle ceramiche e mosaici su piani in legno bath room Intende d use Pref abri Bonding of tiles, mosaics and natural stones on metal surfaces

Open the catalog to page 9

Litoelastic EVO the reactive adhesive zherorisk technology - 10

OVERLAY Bonding of ceramic tiles, mosaics, reinforced slabs, natural stones or resin agglomerates over old ceramic or marble tiles

Open the catalog to page 10

Litoelastic EVO the reactive adhesive zherorisk technology - 11

GREEN MARBLE Bonding of natural | and moisture-sensitive stones and those subject to staining

Open the catalog to page 11

Litoelastic EVO the reactive adhesive zherorisk technology - 12

DAMP ENVIRONMENTS Bonding of mosaics on structures and templates of extruded polystyrene panels 1 used in Turkish baths, hammams and wellness centres

Open the catalog to page 12

Litoelastic EVO the reactive adhesive zherorisk technology - 13

swim ming pools Bonding of ceramic tiles and mosaics in swimming pools including surfaces waterproofed with Elastocem, Coverflex or Aquamaster and in swimming pools and whirlpools with traditional structures in concrete, AISI 316 steel and fibreglass

Open the catalog to page 13

Litoelastic EVO the reactive adhesive zherorisk technology - 14

FAÇADES Bonding of ceramic tiles, gres porcelain and thin slabs, including those of large size, with or without reinforcement on exterior façades

Open the catalog to page 14

Litoelastic EVO the reactive adhesive zherorisk technology - 15

Specifications Appearance: Part A: thick paste / Part B: Liquid Colours: Comp. A: white / Comp. B: straw-coloured Classification according to EN 12004: R2T - Improved reactive no vertical slip adhesive Customs code: 35069190 Shelf life: 24 months in original packaging. Keep away from frost. Application data Mixing ratios: Part A: 92.6 parts by weight Part B: 7.4 parts by weight Pot life: About 1 hour at T=+23°C Application temperatures allowed: From +10°C to +30°C Adjustment time: Approx. 1 hour Cleaning of equipment and residues: With water and Scotch-Brite™ pad on wet product. When...

Open the catalog to page 15

Litoelastic EVO the reactive adhesive zherorisk technology - 16

Litoelastic EVO is also produced in an FR (Flame Retardant) version for use in the maritime sector. Certification of conformity to marine equipment has been granted to a kit composed not only of Litoelastic EVO FR adhesive but also of EpoxyElite EVO FR sealant, according to directive 2014/90/EU (2010 FTP Code). The certification concerns the determination of the limited ability of surface materials and foundations for covering bridges to propagate a flame, in addition to the calorific value. The kit satisfies the requirements of Part 5 of the FTP Code 2010 of the IMO (finishing materials...

Open the catalog to page 16